Pressure Transmitters - Page 28

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50426427

The WIKA A-10 pressure transmitter is precision engineered and manufactured to fit many industrial and OEM pressure measurement applications. The rugged design provides resistance to vibration, shock, wide temperature variations, RFI and other extreme environmental conditions that are typical of industrial and OEM applications. Performance and reliability is enhanced by the all stainless steel welded measuring cell that eliminates the need for soft sealing materials that may deteriorate over time. The stateof- the-art manufacturing and assembly process increases the long term reliability of the A-10. Primary applications include process control and automation, hydraulics, pneumatics and machine controls. Pressure ranges: from 0 - 15 psi up to 0 - 10,000 psi. Non-linearity: +/- 0.5% BFSL ( +/- 0.25% available). RoHS-conformity. CE-conformity: Pressure equipment directive - 97/23/EC; EMC directive - 2004/108/EEC (Group 1, Class B) and immunity according to EN 61 326. Shock resistance: 500g according to IEC 60068-2-27 (mechanical shock). Vibration resistance: 10g according to IEC 60068-2-6 (vibration under resonance). Wiring protection: Overvoltage protection: 32 VDC, 36 VDC with 4-20 mA; Short-circuit protection - Sig+ to UB-; Reverse polarity protection - UB+ to UB-. Test pereference conditions according to IEC 61298-1: Relative humidity: 45-75%; Temperature - 59-77 degree F (15-25 degree C); Atmospheric Pressure - 86-106KPa (25.4…31.3 inhg). Weight: Approx. 2.8 oz. (80 g). Supply voltage: 8-30 DC (14-30 VDC). Process connection: 1/4 NPT Male. Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector. 100 psi Over pressure safety and 250 psi burst pressure.

Manufacturer: Hangzhou Meacon Automation technology Co., LTD Brand: Meacon Model: MIK-P300-1

Pressure transmitter is a common sensor in industrial. Widely used in automatic control program like Water resources and hydro power, railway, building automation, , petrochemical, electronic, marine etc. It is used to measure the gas, steam¡¯s level , density, and press, transform it into 4-20mA DC signal connecting to PC control instrument and etc. Product Specification Pressure range: 1-1000Bar (optional) Power supply: 24VDC Signal output 4-20mA/1-5V/0-20mA/0-5V Medium temperature: -50-300¡ãC Working temperature -40-85¡ãC Compensation temperature: -10-70¡ãC Overload pressure 200%FS Protection Classification: IP65 Body materials 316 stainless steel (standard) Transmission distance: within 100m (No electromagnetic interference) Pressure connection: G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5, M20*1.5 etc. (optional) Measure media Gas, water, oil or other media can be compated with stainless Accuracy 0.1/0.3/0.5 (optional) Terminal Block Specifications : Hirschmann contact, direct fuse, aerial linker. How to choose your parameters for pressure transmitter Product Name MIK-P300-1 Pressure Range 1Bar-1000Bar (optional) Power supply V1: 24V(9-32V),V2: 12V,V3:¡À12V Signal output B1: 4-20mA,B2:0-10V,B3:1-5V,B4:0-5V Electrical connector C1:M20*1.5,C2:G1/2,C3:G1/4,C4:M14*1.5 Addition information J1:Hirschmann connector,J2:Direct wire,J3:Aviation plugs P1: 0.5%,P2:0.3%,P3:0.1% I: Bile diaphragm D: Seismic requirements E: Customer requirment V1 B1 C1 J1P1E For example: MIK-P300-2Mpa-V1-B1-C1-J1P1E

Manufacturer: Automation Components Inc. (ACI) Brand: Automation Components Inc. (ACI)

A/LP2-5-5-LCD | ACI | Differential Pressure Sensor Transducer Unidirectional | 0-5" w.c. | 0-5 VDC | Pressure Sensor w LCD_Yes

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series MS2 Magnesense® II Differential Pressure Transmitter combines the proven stable Hall Effect sensing technology of our original Series MS with additional features to reduce installation time and simplify ordering. In this second generation transmitter, we have added additional field selectable pressure ranges so that each model can have four selectable ranges along with four additional bidirectional ranges. When using the pluggable integral display or the portable remote display tool, both Metric and English engineering units can be selected via on board dip switches. Dual current and voltage outputs allow users to simultaneously take either a current or voltage output to their building controller and have a local test circuit for verification of the output reading. The voltage output can be selected to be either 0 to 5 VDC or 0 to 10 VDC, while the current is always 4 to 20 mA. Both the current and voltage output can also be inverted. The MS2 can also be ordered with either a BACnet® or MODBUS® Communications protocol output that will allow the transmitters to be daisy-chained together. Like the original Series MS, the second generation transmitter can be used as a linear pressure output or a linear velocity output with the square root extraction done in the transmitter. Additional parameters have been included to expand the square root capability to include flow measurements.

Manufacturer: OMEGA Brand: Omega

THERMOCOUPLER TRANSMITTER

Manufacturer: Automation Components Inc. (ACI) Brand: Automation Components Inc. (ACI)

A/DP2-3-5 | ACI | Differential Pressure Sensor Transducer Bidirectional | +/- 0.25" w.c. | 0-5 VDC |

Manufacturer: Dwyer Instruments Brand: Dwyer

Technical Specification Item Pressure Transducer Range 0 to 50 psi Accuracy +/-1% Full Scale Output 4 To 20 mA DC Power Required 13 to 30 VDC Process Connection 1/4 MNPT Electrical Connections Terminal Board with 1/2 NPT Female Conduit Connection Wetted Materials 316 SS and 316L SS Housing Cast Aluminum Operating Temp. 0 to 200 F NEMA Rating 4X Loop Resistance 0 to 1300 Ohms Max. Pressure (PSI) 100 Thermal Error +/-0.02% Full Scale per Degree F Compatible With Liquids and Gas Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Nagano Keiki Seisakusho Brand: Nagano Keiki Seisakusho. Ltd.

Pressure Transmitter, Range 0-200Kgf/Cm, Power 24V, Output 4-20Ma 316 Ss

Manufacturer: ROSEMOUNT Brand: Rosemount

NEW ROSEMOUNT 1151DP4E22B1DF 45V-DC 25-150IN-H2O PRESSURE TRANSMITTER D534237

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50398083

The WIKA A-10 pressure transmitter is precision engineered and manufactured to fit many industrial and OEM pressure measurement applications. The rugged design provides resistance to vibration, shock, wide temperature variations, RFI and other extreme environmental conditions that are typical of industrial and OEM applications. Performance and reliability is enhanced by the all stainless steel welded measuring cell that eliminates the need for soft sealing materials that may deteriorate over time. The stateof- the-art manufacturing and assembly process increases the long term reliability of the A-10. Primary applications include process control and automation, hydraulics, pneumatics and machine controls. Pressure ranges: from 0 - 15 psi up to 0 - 10,000 psi. Non-linearity: +/- 0.5% BFSL ( +/- 0.25% available). RoHS-conformity. CE-conformity: Pressure equipment directive - 97/23/EC; EMC directive - 2004/108/EEC (Group 1, Class B) and immunity according to EN 61 326. Shock resistance: 500g according to IEC 60068-2-27 (mechanical shock). Vibration resistance: 10g according to IEC 60068-2-6 (vibration under resonance). Wiring protection: Overvoltage protection: 32 VDC, 36 VDC with 4-20 mA; Short-circuit protection - Sig+ to UB-; Reverse polarity protection - UB+ to UB-. Test pereference conditions according to IEC 61298-1: Relative humidity: 45-75%; Temperature - 59-77 degree F (15-25 degree C); Atmospheric Pressure - 86-106KPa (25.4…31.3 inhg). Weight: Approx. 2.8 oz. (80 g). Supply voltage: 8-30 DC (14-30 VDC). Process connection: 1/4 NPT Male. Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector. 400 psi Over pressure safety and 1,500 psi burst pressure.