Pressure Transmitters - Page 29

Manufacturer: Endress + Hauser Brand: Endress & Hauser

HomeProductsTemperature TMT162 iTEMP TMT162 Temperature field transmitter Electronic monitoring, conversion and display of input signals - all over the industries Order Select & Size Configure Compare ©Endress+Hauser ©Endress+Hauser ©Endress+Hauser Unsurpassed reliability, accuracy and long-term stability in critical processes. The remote configurable transmitter transfers and monitors converted signals from RTD sensors and thermocouples as well as from resistance and voltage signals using selectively HART®, FOUNDATION FieldbusTM-, PROFIBUS® PA-communication. It visualizes the signals on its own backlit display. A field housing allows a direct connection in harsh process areas as well as in hygienic applications as option.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616WL-25-LCD

The Series 616WL Differential Pressure Transmitter senses very low pressures of air and non-combustible, compatible gases and sends a standard 4-20 mA output signal. All models, including those featuring the 3 digit LCD digital read-out, are factory calibrated to specific ranges as listed in the chart below. Positive, negative and differential pressures can be measured within a full span accuracy of ±0.50%. This weatherproof unit is enclosed in a polycarbonate case, designed to meet (IP66/NEMA 4X). Internal digital push button zero and span allow for quick and simple field calibration.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 621-100-1-1-2-6

The NOSHOK series 621 pressure transmitters combine the reliability and long life of diffused semiconductor and sputtered thin film strain gage sensors with safe electronics for outstanding performance and value. These transmitters were designed for applications that require pressure measurement in hazardous environments. All wetted parts are made of stainless steel and elgiloy welded with no internal O-rings, gaskets or seals. Units undergo extensive testing during the manufacturing process to ensure that the highest performance is achieved in the demanding environments found in today's applications. The transmitters are available with a standard threaded connection as well as a flush diaphragm configuration and are factory mutual approved. Models incorporate significant levels of RFI, EMI and ESD protection. Ideal for hydraulic and pneumatic systems, pumps and compressors, test equipment and systems, HVAC systems, power generation, water and wastewater, refrigeration equipment, laboratory and test equipment, chemical/petrochemical, marine, pipeline gas compressors, oil field and offshore applications. Accuracy: +/-0.25 percent full scale (BFSL). Hysteresis: less-than equal to +/-0.1 percent full scale. Repeatability: less-than equal to +/-0.05 percent full scale. Stability: less-than equal to +/-0.2 percent full scale for 1 year, non accumulating. Load limitations: less-than equal to (VPower-10)/0.020 Amp for 4 mA to 20 mA. Zero/Span offset: less-than equal to +/-0.5 percent full scale. Response time: less than 1 ms (between 10 percent and 90 percent full scale). Durability: greater-than 100,000,000 full scale cycles. Housing material: 316 stainless steel. Environmental rating: NEMA 4x (IP67). Electrical rating: Reverse polarity, over-voltage and short circuit protected. Shock: 1000 g's according to IEC 770 for mechanical shock. Output Signal: 4 mA to 20 mA 2-wire. Power Supply: 10 Vdc to 30 Vdc unregulated. Load limitations:

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 300-300-1-1-2-8

Compact OEM Pressure Transducers. Ruggedness and long term stability during operation were the focus in the design of this NOSHOK 300 series pressure transducer. As a result of this we were able to develop a transducer for use in general industrial applications with technical specifications exceeding those of transducers costing much more. A wide variety of electrical and mechanical connections are available for easy installation into most applications along with most popular analog output signals. All electrical components carry a high degree of EMC protection compliant with EN 61 326 which make it ideal for areas where RFI, EMI or ESD signals are present. The compact size makes it very attractive for applications where space is limited. Constructed of high quality stainless steel makes it compatible with chemically aggressive media. The sensor is welded directly to the process connection eliminating the need for any gaskets or seals while also increasing the resistance to mechanical stress. Applicable for hydraulic and pneumatic systems, pumps and compressors, stamping and forming presses, test equipment and systems, industrial machinery and machine tools. RoHS compliant. Electricity connection: Hirschmann (DIN EN 175301-803 Form A). 4 mA to 20 mA, 2-wire Output Signal. Process Connection: 1/4" NPT Male. 2 times Full Scale Proof Pressure. 6 times Full Scale Burst Pressure. +/-0.5 percent full scale (BFSL) Accuracy; (Includes the effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors). Repeatability: less than or equal to +/-0.05 percent Full Scale. Hysteresis: less than or equal to +/-0.1 percent Full Scale. Stability: less than or equal to +/-0.2 percent Full Scale per year, non-accumulating. Response time: less than or equal to 4 ms (between 10 percent and 90 percent Full Scale). Power supply 10 Vdc to 30 Vdc, unregulated. 316 stainless steel Housing material.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 300-15-1-1-2-8

Compact OEM Pressure Transducers. Ruggedness and long term stability during operation were the focus in the design of this NOSHOK 300 series pressure transducer. As a result of this we were able to develop a transducer for use in general industrial applications with technical specifications exceeding those of transducers costing much more. A wide variety of electrical and mechanical connections are available for easy installation into most applications along with most popular analog output signals. All electrical components carry a high degree of EMC protection compliant with EN 61 326 which make it ideal for areas where RFI, EMI or ESD signals are present. The compact size makes it very attractive for applications where space is limited. Constructed of high quality stainless steel makes it compatible with chemically aggressive media. The sensor is welded directly to the process connection eliminating the need for any gaskets or seals while also increasing the resistance to mechanical stress. Applicable for hydraulic and pneumatic systems, pumps and compressors, stamping and forming presses, test equipment and systems, industrial machinery and machine tools. RoHS compliant. Electricity connection: Hirschmann (DIN EN 175301-803 Form A). 4 mA to 20 mA, 2-wire Output Signal. Process Connection: 1/4" NPT Male. 2 times Full Scale Proof Pressure. 6 times Full Scale Burst Pressure. +/-0.5 percent full scale (BFSL) Accuracy; (Includes the effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors). Repeatability: less than or equal to +/-0.05 percent Full Scale. Hysteresis: less than or equal to +/-0.1 percent Full Scale. Stability: less than or equal to +/-0.2 percent Full Scale per year, non-accumulating. Response time: less than or equal to 4 ms (between 10 percent and 90 percent Full Scale). Power supply 10 Vdc to 30 Vdc, unregulated. 316 stainless steel Housing material.

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 500 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections DIN 43650-A Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 1000 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 30 Hg Vac to 30 psi Accuracy +/-0.5% Full Scale Output 1 to 5VDC Power Required 9 to 36VDC Process Connection 1/8 NPT Male Electrical Connections Shielded Cable Lead Length (In.) 36 Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Max. Pressure (PSI) 60 Thermal Error +/-3% ( -4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: ROTORK Brand: ROTORK

NEW ROTORK PT-1330-12 R025 POSITION 12.5-36V-DC TRANSMITTER D555845

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 677B-12

Series 677B Differential Pressure Transmitters are designed to measure pressures as low as 0.1 in WC with ±0.4% accuracy. Use Series 677B for building energy management systems, environmental pollution control, oven pressurization, lab and fume hood control, HVAC and VAV applications. The transmitter features 15 psid overpressure, reverse polarity protection and EMI/RFI protection. Internal regulation permits use with unregulated DC power supplies. The NEMA 4 housing allows for versatile mounting locations and integral mounting tabs simplify installation.

Manufacturer: Setra Systems, Inc. Brand: Setra Systems Model: 2061100PG2M11028NN

The Model 206 industrial pressure transducer is one of the most rugged and reliable sensors available. These transducers prove to be superior to competitive brands and technologies in application field testing. The capacitive design exhibits resistance to environmental effects such as shock, vibration, temperature and EMI/RFI. The Model 206 also meets NEMA-4 and IP65 environmental protection ratings. With a highly accurate stainless steel capacitive sensor design and custom ASIC based circuit, the Model 206 maintains a high level of performance and accommodates a variety of pressure fittings & electrical connector options.