Pressure Transmitters - Page 44

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 621-3000-1-1-2-6

The NOSHOK series 621 pressure transmitters combine the reliability and long life of diffused semiconductor and sputtered thin film strain gage sensors with safe electronics for outstanding performance and value. These transmitters were designed for applications that require pressure measurement in hazardous environments. All wetted parts are made of stainless steel and elgiloy welded with no internal O-rings, gaskets or seals. Units undergo extensive testing during the manufacturing process to ensure that the highest performance is achieved in the demanding environments found in today's applications. The transmitters are available with a standard threaded connection as well as a flush diaphragm configuration and are factory mutual approved. Models incorporate significant levels of RFI, EMI and ESD protection. Ideal for hydraulic and pneumatic systems, pumps and compressors, test equipment and systems, HVAC systems, power generation, water and wastewater, refrigeration equipment, laboratory and test equipment, chemical/petrochemical, marine, pipeline gas compressors, oil field and offshore applications. Accuracy: +/-0.25 percent full scale (BFSL). Hysteresis: less-than equal to +/-0.1 percent full scale. Repeatability: less-than equal to +/-0.05 percent full scale. Stability: less-than equal to +/-0.2 percent full scale for 1 year, non accumulating. Load limitations: less-than equal to (VPower-10)/0.020 Amp for 4 mA to 20 mA. Zero/Span offset: less-than equal to +/-0.5 percent full scale. Response time: less than 1 ms (between 10 percent and 90 percent full scale). Durability: greater-than 100,000,000 full scale cycles. Housing material: 316 stainless steel. Environmental rating: NEMA 4x (IP67). Electrical rating: Reverse polarity, over-voltage and short circuit protected. Shock: 1000 g's according to IEC 770 for mechanical shock. Output Signal: 4 mA to 20 mA 2-wire. Power Supply: 10 Vdc to 30 Vdc unregulated. Load limitations:

Manufacturer: Winters Brand: Winters Model: LE35000

Applications: suitable for all process and automation control, hydraulics and pneumatic sensing, pump and compressor monitoring, refrigeration and HVAC. Specifications- output signal: standard 2-wire: 4-20 mA/Vs = 8-32 Vdc. Accuracy: +/-0.5 Percent FSO. Permissible load: 2-wire: rmax = [(Vs - Vs min)/0.02] Ohm, 3-wire: rmin = 10 kOhm. Influence effects: supply: 0.05 Percent FSO/10 V, load: 0.05 Percent FSO/kOhm. Response time: 2-wire:

Manufacturer: BAILEY Brand: Bailey

NEW BAILEY EQS10400 PLATINUM STANDARD 12-42V-DC TEMPERATURE TRANSMITTER D537960

Manufacturer: Setra Systems, Inc. Brand: Setra Systems Model: 2091050PG2M1102

The Model 209 pressure sensor is designed for Industrial and OEM customers who require high performance, reliability and versatility at an affordable price. It offers exceptional ±0.25% FS accuracy with pressure ranges from 1 PSI up to 10,000 PSI to meet a multitude of demanding applications. The 209 features all stainless steel wetted materials and offers many pressure and electrical connections to satisfy challenging installation requirements. The 209 features a patented overpressure stop to protect the sensor against unexpected spikes or in high pulsation applications. True Low Range Sensor The Model 209’s capacitive transducer is designed for industrial applications with demanding price and performance requirements. The Model 209 offers exceptional reliability in typical industrial grade environments. The true low range sensor design offers high performance with no additional amplification required to meet range requirements down to 1 PSI. Flexibility for Many Applications The 209 transducer offers many pressure and electrical fittings covering many installation configurations. It minimizes additional engineering time to accommodate the sensor, allowing for earlier project completion and quicker time to market. Robust Design & Construction for Reliable Service The Model 209 is designed and built to withstand demanding applications. The industrial construction, with optional positive overpressure stop, enables the sensor to withstand overpressure conditions up to 16X the rated range.

Manufacturer: MOORE Brand: Moore

NEW MOORE 33E5475 NULLMATIC TEMPERATURE TRANSMITTER D479000

Manufacturer: Micro Switch Brand: Unknown

Technical Specification Item Compensated Gage Pressure Sensor Range 0 to 50 psi Accuracy +/-0.25% FSS Output 10VDC Power Required 15VDC Process Connection Weld Ring Electrical Connections 2 Ribbon Cable Operating Temp. -40 Degrees to 257 Degrees F Max. Pressure (PSI) 250 Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 800-0/250-1-1-8-8-060-6

The NOSHOK Series 800 temperature transmitter provides an unbeatable level of performance at an economical price. Using the proven reliability and stability of 100 ohm platinum resistance technology, this transmitter offers a broad array of choices for the OEM and user alike. A rigorous test and inspection process is performed on all NOSHOK temperature transmitters prior to shipment to further ensure 100 percent "out of the box" reliability. Applicable for water systems, storage tanks, industrial machinery and machine tools, HVAC systems, refrigeration systems. +/-0.5 percent BFSL Accuracy. Burnout protected from 4 mA to 20 mA, 2-wire Output signals Sensor protection. 1/2" NPT male Process connections. Hirschmann (DIN EN 175301-803 Form A) Electrical connections. +/-0.5 percent Full scale. 10 to 30 VDC Power supply. Equal-to or less than VPower -10)/0.020 Amps Load. 316 Stainless steel wetted and housing material. -40 to 185 degree F Ambient Storage temperature. IP65 according to EN 60529/IEC 529 Environmental rating. CE compliant to EMC norm EN 61326:1997/A1:1998 RFI, EMI and ESD protection. Reverse polarity, over-voltage and short circuit protection. Simple 2-key programming for set points, contact functions (N.O./N.C.), reset points, contact types (npn/pnp) and switching function (hysteresis/gate). Integrated password protection. Four-digit LED display. Scalable analog output. Fast response time. Reverse polarity, over-voltage and short circuit protection. Stem measures 6mm diameter by 6" length.

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 5000 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections DIN 43650-A Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 7500 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: DRUCK Brand: Druck

NEW DRUCK PTX 520-A077 9-30V-DC 35IN-HG PRESSURE TRANSMITTER D535030

Manufacturer: Proportion-Air Brand: PROPORTION AIR

DSB Transducer, 0-175 PSIG = 0-10 VDC Output, 1/4" NPT Fitting, 18" Cord with Flying Leads