Pressure Transmitters - Page 47

Manufacturer: WIKA Brand: WIKA

From our online store inventory, we are selling a WIKA Tronic S-10 8348868 891.13.500 Pressure Transmitter 10-30VDC 1/2" NPT. Specifications: Model #: WIKA Tronic S-10 8348868 891.13.500 Pressure Transmitter 10-30VDC 1/2" NPT More Information: Power Supply: 10-30VDC System/Output Signal: 2-Wire 4-20 mADC Connection Size/Conduit Connection: 1/2" NPT Stainless Steel General Purpose 891.13.500 Range: 0-50PSI

Manufacturer: Winters Brand: Winters Model: LE315

Applications: suitable for all process and automation control, hydraulics and pneumatic sensing, pump and compressor monitoring, refrigeration and HVAC. Specifications- output signal: standard 2-wire: 4-20 mA/Vs = 8-32 Vdc. Accuracy: +/-0.5 Percent FSO. Permissible load: 2-wire: rmax = [(Vs - Vs min)/0.02] Ohm, 3-wire: rmin = 10 kOhm. Influence effects: supply: 0.05 Percent FSO/10 V, load: 0.05 Percent FSO/kOhm. Response time: 2-wire:

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 30 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections Shielded Cable Lead Length (In.) 39 Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 60 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 500 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections 1/2 Conduit Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 1000 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 300 psi Accuracy +/-0.5% Full Scale Output 1 to 5VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections Shielded Cable Lead Length (In.) 36 Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Max. Pressure (PSI) 600 Thermal Error +/-3% ( -4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: METRIX Brand: Metrix

NEW METRIX TXR-30114 TRENDSETTER 0-4 MILS 30V-DC VIBRATION TRANSMITTER D558178

Manufacturer: Rosemount Brand: Rosemount Transmitter Model: Rosemount Transmitter 1151dp3e22w7

Rosemount Transmitter 1151dp3e22w7 cal. 0 to 30 in H20. Output 4-20. supply 45 vdc max. Max Wp 2000 psi. Serial 2338993 12/05. new in box

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 8642885

WIKA S-10 pressure transmitters are precision engineered to fit most industrial pressure measurement applications. The compact, rugged design makes these instruments suitable for applications including hydraulics and pneumatics, vacuum, test equipment, liquid level measurement, press control, compressor control, pump protection and numerous other processing and control operations. A wide range of electrical connection and process connection options are available to meet almost any requirement. The S-10 features an all-welded stainless steel measuring cell for improved media compatibility. There are no internal soft sealing materials that may react with the media or deteriorate over time. The compact case is also made of stainless steel and is available with environmental protection ratings up to NEMA 6P / IP 68. Shock resistance: 1000g according to IEC 60068-2-27 (mechanical shock); Vibration resistance: 20g according to IEC 60068-2-6 (vibration under resonance). Wiring protection: Protected against reverse polarity, overvoltage and short circuit. Weight: Approx. 0.4lb. L-connector, DIN EN 175301-803, Form A (DIN 43 650) for conductor cross section up to max. 1.5 sq mm, conductor outer diameter 0.3" (6-8 mm). Supply voltage: 10-30 VDC. Process connection: 1/2 NPT male. Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector. Piezoresistive sensor and thin-film sensor technology. 4-20 mA 2-wire output signal, others available.

Manufacturer: ZIJIA Brand: ZIJIA Model: 30psi Pressure Transducer

Feature: Protection: reverse polarity protection, overcurrent protection, overvoltage protection, anti-interference design Fits For: oil, fuel, water or air pressure works, tanks, gas cylinders, etc. Material: 316 Stainless Steel Color: Silver Range: 30psi Output: DC 0.5~4.5V Power: DC 5V Accuracy: 0.5% FS~1% FS Mounting thread: NPT1/8 Temperature range: -40~125°C Cable Length: approx. 30cm/11.81" Dimension: 52 x 24mm/2.05 x 0.94"(L x Dia) Package Include: 1 x 30psi Pressure Transducer 1 x Cable

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series 616KD Differential Pressure Transmitters with One-Touch® technology are designed for simplicity making them the ideal choice for installers and maintenance professionals. The One-Touch® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional transmitters which require time to annually remove the product from service plus the additional time to actually perform a complete full-span calibration.