Dissolved Oxygen Meters & Accessories - Page 19

Manufacturer: Invacare Corporation Brand: Invacare

Invacare offers aluminum oxygen cylinders in standard sizes packaged to meet your requirements. You can order empty units in convenient six packs or competitively priced pallet quantities.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35432-02

The Oakton WD-35432-00 PD 650 pH/dissolved oxygen (DO) multi-parameter meter measures your choice of pH, mV, or ISE and dissolved oxygen (DO), and is handheld, dustproof and has a waterproof casing. The meter features ATC, with push-button, pH calibration up to six points each, for pH and conductivity, and three points for DO. It also has auto-buffer options, and recognition of USA, National Institute of Standards and Technology (NIST), Deutsches Institut für Normung (DIN) and PWB standards, for ease of use. It has a large, backlit, LCD screen to provide ease of viewing, and to display indicators. The meter has an adjustable alarm to remind you when calibration is due. It stores up to 500 data sets, and has IrDA wireless technology for data communication. The meter has a built-in, real time clock with time and date stamping, set-point alarms, and a built-in stand. It comes with an electrode status indicator and password protection. The meter has manual or automatic temperature compensation of 0 to 100 degrees C. It has a pH range of -2.00 to 20.00, resolution of 0.1/0.01/0.001 and accuracy of + or - 0.002 pH + 1 LSD. Temperature compensation range of -10.0 to 110.0 degrees C (14.0 to 230.0 degrees F), resolution of 0.1 degree C (0.1 degree F), and an accuracy of + or - 0.5 degrees C (+ or - 0.9 degrees F). MV range is + or - 2000.0, resolution of 0.10, and accuracy of + or - 0.2 mV + 1 LSD. Ion range is 0.001 to 19900, ppm, molar, mg/L, resolution of 2 or 3 digits, and accuracy of 0.5% FS (monovalent) 1% FS (divalent). DO range is 0 to 600%/90 mg/L, resolution of 0.1%, 0.01 mg/L, accuracy of + or - 2%, + or - 0.2 mg/L. The dissolved oxygen probe is galvanic. The meter dimensions are 2.25(d) x 3.25(w) x 7.25(h) inches (8.3 x 18.4 x 5.7 cm), and it weighs 380g (without rubber boot). The meter has the ability to store up to 500 data sets, and has research-grade accuracy. Time and date stamping meets Good Laboratory Practice (GLP) standards, and the meter is Ingress Protection (IP) 67-rated, for protection against...

Manufacturer: YSI Brand: YSI

Dissolved oxygen accuracy: +/-0.1 mg/L or +/-2 percent of reading, whichever is greater. Electrolyte: KCl with NA2SO4. For use with YSI 5000 and 5100 meter. Membrane Material: FEP Fluoropolymer Film Cap. Polarizing Voltage: 0.8 volts. Response Time: Typical response to a step change in dissolved oxygen at 20 degree C is 90 percent of the change in 30 seconds. Sensor Materials: Cathode - gold, Anode - silver. Temperature: +/- 0.2 degree C Accuracy, Operating Range: 0 degree to 45 degree C. 1 Year warranty.

Manufacturer: Reed Brand: REED Instruments Model: YK-22DO

The Reed YK-22DO is a dissolved oxygen (DO) and temperature meter with automatic temperature compensation and a polarographic probe with temperature sensor. The dual-level LCD screen displays DO and temperature simultaneously. The meter has a RS232 PC serial interface to output data (cable sold separately), a low battery indicator, and automatic shutoff feature to save battery life. DO meters are commonly used in water-quality testing applications.SpecificationsDO range0 to 20.0mg/LDO resolution0.1mg/LDO accuracy+ or - 0.4mg/LTemperature range0 to 50°C (32 to 122°F)Temperature resolution0.1°C (0.1°F)Temperature accuracy+ or - 0.8°C (+ or - 1.5°F)Power source9V batteryWeight210g (0.46 lb) meter only, 450g (0.99 lb) meter and DO probe Dissolved oxygen (DO) meters measure the amount of dissolved oxygen present in water. The amount of DO helps to determine, for example, drinking water quality, the health of lakes or streams, and aquatic organism sustainability. A probe, also called a sensor or electrode, is inserted into the sample to perform the measurement, and the results appear on the meter display. Applications include sewage and water treatment plants, pollution control, fish farms, and various types of manufacturing. Reed Instruments manufactures test and measurement equipment such as pressure gauges, electrical testers, temperature and humidity instrumentation, and inspection instruments. The company, founded in 2004, is headquartered in Wilmington, NC. What’s in the Box?meterOxygen probeSpare membraneProbe refill solution9V batteryCarrying case

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35434-02

The Oakton WD-35434-02 waterproof PCD 650 meter is a multi-parameter, handheld, and dustproof meter. It measures pH, mV, ISE, conductivity, dissolved oxygen (DO), resistivity, salinity, Total Dissolved Solids (TDS), barometric pressure and temperature within a substance, and is commonly used for water and salt water testing. This meter features automatic temperature compensation (ATC), with push-button calibration up to six points each for pH and conductivity, and three points for DO. It has auto-buffer options and recognition of USA, National Institute of Standards and Technology (NIST), Deutsches Institut für Normung (DIN) and PWB standards, for ease of use. It has a large, backlit, graphic display to provide ease of viewing, and to display indicators. The meter has an adjustable alarm to remind you when calibration is due. It stores up to 500 data sets, and has Infrared Direct Access (IrDA) wireless technology for transferring and printing data, using the companion software application CyberComm 600 Data Acquisition Software (DAS). The meter has a built-in, real time clock with time and date stamping, and set-point alarms. It comes with an electrode status indicator and password protection. This PCD 650 meter determines oxygen saturation up to 600%, and concentration up to 90 mg/L. The meter has a conductivity range of 0 to 500.00 mS, resolution + or - 0.05 % full-scale, and accuracy + or - 1.0 % full-scale. Temperature range -10.0 to 110.0 degrees C (14.0 to 230.0 degrees F), selectable from 0 to 100 degrees C, resolution of 0.1 degree C (0.1 degree F), accuracy of + or - 0.5 degrees C (+ or - 0.9 degrees F). DO range 0.00 to 20.00 mg/L (ppm), 0.0 to 200.0%, resolution 0.01 mg/L (ppm), 0.1%, accuracy + or -0.2 mg/L; + or - 2%. pH range -2.000 to 20.00 pH, resolution 0.1/0.01/0.001 pH, accuracy + or - 0.002 pH. mV range is + or - 2000, resolution 0.1, accuracy + or - 0.2. Barometric pressure is 450 to 825 mm Hg, resolution 1 mm Hg, accuracy + or - 1%. Salinity range is 80.00 ppt, resolution is 0.05% full-s...

Manufacturer: YSI Brand: YSI Model: 606304

10-meter dissolved oxygen and temp field probe and cable only.

Manufacturer: YSI Brand: YSI

The ProODO cable's can be ordered in lengths of 1 meters. Cables come with the ODO optical DO sensor and sensing cap. Cables over 1-meter also come with the 603062 cable management kit. The optical DO cables ONLY work with the YSI ProODO optical DO handheld.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35640-56

The Oakton 35640-56 dissolved oxygen (DO) probe has galvanic sensing technology for quick readings, and comes with a 100-foot cable for wide range of operation. A probe, also called a sensor or electrode, measures the DO of a substance, and is commonly used for testing water quality such as wastewater, saltwater, groundwater, or drinking water. This probe features two replaceable membrane caps with sealed O-rings for ease of maintenance, and it comes with 50 mL of premixed electrolyte solution for ease of use. Its cylindrical body has an exterior diameter of 0.5 inch to fit inside containers. Its dimensions are 6.8(l) x 1.3(w) inches (17.3 x 3.2 cm). The probe is used with Oakton DO 110, DO 300 and DO 600 meters (sold separately). Dissolved oxygen probes are used in a variety of applications to assist in monitoring the amount of oxygen present in water. Applications include sewage and water treatment plants, pollution control, fish farms, and various types of manufacturing. They are commonly used in hydroponics, aquaculture, education, and research to measure water quality. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? Meter Membrane caps 100-foot cable

Manufacturer: Thomas Scientific Brand: YSI Model: 626250-1

Manufacturer: COLE-PARMER Brand: WTW

Durable, I67-rated meters feature a 100% waterproof and easy-to-clean keypad. Silicone rubber keys provide tactile feedback for error-free operation. The large graphic display allows for excellent readability even under difficult lighting conditions. Convenient meter kits provide all the accessories needed to start taking readings. Choose kits with CellOx® 325 probes for general applications such as surface water monitoring or laboratory measurements. DurOx® 325 probes offer additional durability and are for applications such as wastewater aeration monitoring. Meters only include: CD-ROM and four AA batteries. Meter kits add: specified probe, cleaning solution, electrolyte, replacement membrane heads, stand, beaker, and hard carrying case. A rugged line of DO meters with a range of features, benefits, and price points to meet every application and budget! Designed for users who desire a simple-to-use, yet dependable instrument Galvanic probes require no warm-up time Rugged, waterproof housing is great for the field or the lab