Conductivity Meters & Accessories - Page 44

Manufacturer: Reliance Electric Brand: Reliance Electric

Lot Of 5 Reliance Electric Potentiometer D-18393 750 Ohm (8010)

Manufacturer: COLE-PARMER Brand: GF Signet

science-lab-conductivity-meters

Manufacturer: Joyoldelf Brand: Joyoldelf Model: F0149

About Joyoldelf Digital TDS Meter TDS is a measure of the combined content of all inorganic and organic substances contained in a liquid in molecular, know the clear data of TDS is good for us to adjust water purity and improve the water quality. This Joyoldelf digital TDS meter can test TDS, the water temperature and environmental temperature, actually a 3 in 1 test meter! The water tester can be widely used in water treatment industry, drinking water, household water purifiers, outdoor water quality testing etc Using high purity platinum sensor design to ensure precise and stable measurements Easy to use: 1.Remove the protective cap from the tester , press the ON/OFF button (default ppm) 2.Press MODE button, setting your mode 3.Put it into the test solution and wait for stable value 4.Press HOLD button to lock data for remeasuring or taking it out to read 5.Turn off the meter and wipe clean the electrode Package: 1 X TDS EC Meter 1 X PU Leather Cover

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI8936CLN

The Hanna Instruments HI 8936CLN conductivity transmitter with LCD screen is designed for use with the HI 7635, HI 7638, or HI 3001 platinum conductivity potentiometric probe and an HI 8931 controller (all sold separately), for constant offsite monitoring of conductivity. An LCD screen displays measurement values for ease of calibration, process monitoring, and verification. Direct connection of the transmitter to the probe provides a positive electrical connection that eliminates signal loss over long distances. Circuitry in the transmitter and a built-in temperature sensor on the probe provide automatic temperature compensation (ATC). The transmitter has a range of 0 to 1,999 microsiemens/cm, and can be wall-mounted at any convenient location close to the measurement site. The transmitter requires external power to the 4 to 20mA current loop. Protecting the transmitter inside a case is recommended to minimize thermal drifts, particularly for outdoor measurements.SpecificationsConductivity (EC) range0 to 1999μS/cmAccuracy range at 20 degrees C/68 degrees F+ or - 2% of full scale (excluding probe error)CalibrationManual, 2 point, with offset and slope trimmersConductivity probeHI 7635 for in-line applications (not included)Recorder output4 to 20mA, not isolated, max 500 ohmTemperature compensationFixed or automatic, 0 to 50 degrees C (32 to 122 degrees F) with Β=2%/degrees CProtection ratingIP 65Environment0 to 50 degrees C/32 to 122 degrees FWeight1kg/2.2lb.Dimensions165 x 110 x 71mm/6.5 x 4.3 x 2.8 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, hav...

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product description FTO coated glass is the best candidate as the transparent conductive electrode material for the dye-sensitized solar cells(DSSC) and the perovskite solar cells application at present. FTO coated glass can be also used in the productions of thin film silicon solar cell, electrochromic glass, and so on. Technical Datas  Size:100mmx100mmx1.6mm Sheet Resistance:83% Luster of the ITO Layer:Golden Color of the Cross Section:Dark Green Package included:5 pcs FTO glass Friendly Reminder When purchase, please confirm the product is from our Huanyu Instrument, otherwise we can't ensure the quality and after-sale service.We will try our best to provide you the best product and service, welcome to buy our product.

Manufacturer: Simpson Brand: Simpson

Nib Simpson 329A Megohm / Ohm Panel Meter

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The HI9033 portable conductivty meter with multi level LCD display has been designed with the latest microprocessor technology to provide laboratory results and accuracy under humid and industrial conditions. The HI9033 uses a 4 ring potentiometric probe and is ideal is any kind of water or food applications. Conductivty ranges include 0.0 - 199.9 uS/cm, 0-1999 uS/cm, 0.00 - 19.99 mS/cm, 0.0 - 199.9 mS/cm

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI3011

The Hanna Instruments HI 3011 is a submersible flow-through four-ring electro-conductivity (EC) probe with a platinum sensor, nontoxic polyvinylidene fluoride (PVDF) body with polyetherimide (PEI) protective sleeve, 1/2" and 3/4" National Pipe Thread Tapered Thread (NPT) external threads, a 3m (9.8') cable, and operates in pressurized systems. A pH electrode is commonly attached to a pH meter to measure the pH of a substance such as water, food, beer, or wine in lab, industrial, and food applications. This electrode has an NTC sensor that provides ATC for accurate readings in fluctuating temperatures. The PVDF body is nontoxic and is compatible with food. The PEI protective sleeve provides resistance against mechanical stress. The platinum sensor measures conductivity. The 1/2" external thread on the front allows for flow-through mounting and the 3/4" thread on the back for submersion or pipe mounting. The electrode operates in pressurized systems up to 87 psi (6 bar). The electrode comes with a 3m (9.8') cable.SpecificationsBody materialPVDF and PEIOperating temperature0 to 80 degrees C (32 to 176 degrees F)Maximum pressure6 bar (87 psi)Cable3m (9.8')An electrode, also called a sensor or probe, is an instrument used with a meter to test and measure parameters of a substance. All electrodes are probes or sensors, but not all probes are electrodes or sensors. Probes, such as temperature probes, are used to penetrate a material for measurement. Common electrode types are pH, total dissolved solid (TDS), and ion selective electrode (ISE). Electrodes can be half-cell or full-cell (also called combination) types. They can be refillable or non-refillable. Housing material is typically glass or epoxy, and sensors are commonly made with stainless steel or a glass bulb. pH electrodes, which measure the pH of a substance, often have a glass bulb. The bulb senses hydrogen ions, and generates a millivoltage that is picked up by the filling solution and transferred to a wire that connects to the pH meter. Ion selective electr...

Manufacturer: Oakton Instruments Brand: Oakton Instruments

Never watch a tester sink to the bottom of your tank or pond! The Oakton WD-35662-10 TDSTestr 11 is a dual-range waterproof tester that floats, so there's no need to worry. Valox housing and stainless steel electrodes offer good chemical compatibility and durability. All waterproof Testrs have replaceable sensors. Reuse the WD3566210 meter body many times without losing waterproof and dustproof protection. Adjustable TDS factor - 0.4 to 1.0 gives better accuracy. Push-button calibration. Hold function; Auto shutoff. Waterproof, dustproof housing

Manufacturer: Cole-Parmer Brand: Oakton Model: AO-35607-50

Science-lab-conductivity-meters