pH Meters - Page 30

Manufacturer: Oakton Brand: Oakton Model: WD-35634-10

The Oakton 35634-10 pH Testr 10 is a handheld, waterproof and dustproof meter that floats, if dropped in liquid, and features a replaceable double-junction electrode within its reusable tester body. A portable meter is commonly used to measure the pH of substance such as food, beer, or wine, and is also used to test cleaning water, rinse water, and wastewater, in lab, industrial and food applications. This microprocessor-based meter has Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures, and three-point, push-button calibration with auto-buffer recognition of US and National Institute of Standards and Technology (NIST) standards for a wide range of results. The meter’s waterproof and dustproof housing has an Ingress Protection (IP) 67-rating for protection against solid objects or liquids. It has a large, upright, dual-line LCD screen for ease of viewing, error messages, a hold function which freezes readings for recording, and an auto shut-off that turns the meter off after 8.5 minutes of nonuse to extend the life of the batteries. It has a protective cap to reduce contamination and a double silicone O-ring for ease of electrode module replacement.

Manufacturer: Etekcity Brand: Etekcity Color: Yellow & Blue

PH Meter Specifications Measuring range: 0-14 pH Resolution: 0.01 pH Accuracy: 0.05 pH Batteries: 4x 1.5V LR44 button cell (AG13) Automatic temperature compensation: 0-50°C (32-122°F) Dimensions: 5.94x1.30x0.79in /151x33x20mm Weight: 1.87oz /53g TDS Meter Specifications Measuring range: 0-9990ppm Accuracy: ± 2% Batteries: 2x 1.5V LR44 button cells Temperature range: 0-99ºC / 32-212ºF Weight: 54g Dimensions: 142 x 25 x 15mm Note: Do not use  PH Meter and  TDS Meter with hot or running water. Do not submerge or leave in direct sunlight. Both meters are calibrated from the factory and does not require any adjustment. Package includes 1 x Etekcity pH Meter 2011 4 x 1.5V LR44 button cells 1 x Adjustment screwdriver 2 x Calibration packets 1 x Carrying case of PH Meter 2011 1 x User's manual of PH Meter 1 x Etekcity TDS Meter 2 x 1.5V LR44 button cells 1 x Carrying case of TDS Meter 1 x User's manual of TDS Meter

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Standard models are available with a 10- or 25-ft cable with BNC connections. Preamplified models put an end to problems associated with high impedance signals-ideal for environments with high electrical noise or high humidity. Order replacement batteries for preamplified models separately. Connect these electrodes to standard pH or ORP meters to send a signal up to 1000 ft without an external power supply. Order industrial housings seperately. High-pH, double-junction electrodes are well suited for pH levels above 13 or high sodium ion concentrations. Double-junction reference protects against contamination from heavy metals, organics, and sulfides. Maximum pressure is 150 psi at 25°>C. Note: 100Ω RTD ATC elements are platinum and conform to DIN curve 43760. ATC connector is miniature audio plug. Connector for the 1 kΩ RTD and the 3 kΩ Balco ATC elements is a spade lug. Connector for 100 kΩ thermistor ATC elements is a standard 1/4" phone plug. Use for many applications in a variety of housings Preamplified version allows for long cable runs

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The HI 99171N portable leather and paper pH meter has automatic calibration, on-screen tutorial messages, Automatic Temperature Compensation (ATC), a battery error prevention system, and a multi-level LCD screen. Calibration is automatic at one or two points with two sets of memorized buffers (Standard 4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18), and calibration sachets are included. On-screen tutorial help aids in calibration and setup. ATC eliminates the need for extra calculations, and a built-in temperature probe measures pH and temperature simultaneously. The flat tip probe is specifically designed for direct pH measurement on paper and leather, and helps optimize surface contact with the sample. The meter has a battery error protection system to help prevent false readings, and a multi-level LCD screen with 3/8” black digits for readability. The meter is waterproof, and used for pH measurements of leather and paper, such as food industry packaging. pH range is -2.00 to 16.00 (+ or - 0.02pH), with a resolution of 0.01pH. Temperature range is -5.0 to 105.0 degrees C (23.0 to 221.0 degrees F), + or - 0.5 degrees C (up to 60 degrees C) and 1.0 degrees C (outside); + or - 1.0 degrees F (up to 140 degrees F) and 2.0 degrees F (outside) with a resolution of 0.1 degrees C (0.1 degrees F). Dimensions are 150 x 80 x 36 mm/5.9 x 3.1 x 1.4 inches (H x W x D), and it weighs 210 g (7.4 oz.). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The device operates on three 1.5V AA batteries (included) and turns off automatically after eight minutes of non-use. pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists. Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, ...

Manufacturer: InnoLife Brand: InnoLife Color: 0.1 pH

This pocket-sized pH meter digital pen, with advanced technology and imported components, greatly reducing the volume and costs, maintaining their good quality, is born to be popular. Featuring high stability, reliability and usability, it's suitable for users of all ages in various conditions.Pure water production and consumption, electroplating liquid, swimming pool water, fluid photography, laboratories, aquaculture, food processing, home, office, teaching physics and chemistry, cosmetics ionized water, municipal water supply...etc.Calibration: 1. Immerse the electrode in standard buffer solution (under the temperature of 25??), and gently shake the electrode. 2. Regulate the trimmer with the screwdriver until the buffer solution value corresponding to the measurement temperature is obtained. Specifications:1. Measuring range: pH 0.0 - 14.02. Resolution: 0.1pH3. Accuracy: 0.1pH (at 20??/68?H) 4. Typical EMC DEV: ??0.2pH5. Battery: 3*1.5v (AG-13 button battery)6. Operating temperature: 0??to 50?? (32?H- 122?H) 7. Relative humidity:  95%8. Life: Approx. 700 hours of use9. Trimming: By potentiometer

Manufacturer: InnoLife Brand: InnoLife Color: 0.01 pH

This pH meter 2011 is a perfect device for you to test the acidity or alkalinity of liquids. It is very easy to use - just immerse the electrode and you can get the readings. With resolution of 0.01pH and 0.05Ph accuracy, you may get higher accuracy than other pH meters. When ultra accuracy is needed, use the pH 4.0 & 6.86 buffers for calibration. Ideal for many household or laboratory applicationsWith a standard measuring range of 0-14 pH, the pH meter 2011 is great for a wide range of tasks. An affordable way to test your swimming pool, aquarium, tap water, or appliance water source, you can finally know whether the water you are drinking or using is acceptable for the application. It is also an excellent choice for basic measurements in a laboratory setting.SpecificationsMeasuring range: 0-14 pHResolution: 0.01 pHAccuracy: ??0.05 pHBatteries: 4x 1.5V LR44 button cell (AG13)Automatic temperature compensation: 0-50??C (32-122??F)Dimensions: 5.95x1.30x0.80inWeight: 1.87oz /53gPackage includes 1 x Model: pH Meter 2011(Red)4 x 1.5V LR44 button cells1 x Adjustment screwdriver2 x Calibration packets1 x Carrying case1 x User's manual>nt

Manufacturer: Leeko Brand: Leeko Color: Yellow

What is PH Meter ? - PH hold is an electronic device used for measuring the PH (acidity or alkalinity) of a liquid .A typical PH meter consists of a special measuring probe (a glass electrode) connected to an electronic meter that measures and displays the PH reading. Features: - Fully waterproof - Auto turn on and off - Auto temperature compensation - No external knobs or switches - One-Touch Calibration System - Replaceable pH probe Specifications: - 1. Measure Range: 0.00-14.00 pH - 2. Resolution: 0.01 pH - 3. Accuracy: ± 0.1 pH - 4. Automatic temperature compensation: 0-50C/ 122F - 5. Button battery: 4 X 1.5V(AG-13 included) - 6. Product dimensions: 15.1*3.3*2cm/5.9*1.3*0.8 inch - 7. Net weight: 52g/ 1.83 Oz - 8. Set of easy instructions (included) Package Content: 1 * pH Meter 1 * Calibration screwdriver 1 * User manual

Manufacturer: CyberTech Brand: CyberTech Model: PH-107

This digital pen style pH meter is an ideal instrument for any aquarium, the fishing industry, swimming pools, school laboratories, food & beverage etc. Please be sure to calibrate with buffer solution before use. Calibration: -- Immerse the tester up to the maximum immersion level in the PH 4 or 6.86 buffer solution. (Package Includes 2 pack of PH substance which makes 250 ml buffer solutions, PH 4 or PH 6.86). -- Allow the reading to stablilize and using the small screwdriver adjust the calibration trimmer to reading 6.9 warning: -- Keep away from Children. In case of skin contact, rinse with water.

Manufacturer: LuckyStone Brand: LuckyStone Model: Other case

This digital pen style pH meter is an ideal instrument for any aquarium, the fishing industry, swimming pools, school laboratories, food & beverage etc. All inspection qualified before shipment. Factory calibrated, it can be used immediately. Please be sure to calibrate with buffer solution before use(Long time no use). Calibration: -- Immerse the tester up to the maximum immersion level in the PH 4 or 6.86 buffer solution. (Package Includes 2 pack of PH substance which makes 250 ml buffer solutions, PH 4 or PH 6.86). -- Allow the reading to stablilize and using the small screwdriver adjust the calibration trimmer to reading 6.9

Manufacturer: Yakamoz Brand: Yakamoz Color: Red

Yakamoz High Accuracy Digital pH Meter The pH meter by Yakamoz is a perfect device for many household or laboratory applications, such as swimming pool, drinking water, home brewing, school laboratories, aquarium, ect. This pH meter with a standard measuring range of 0-14 pH and the resolution up to 0.01pH and a 0.1pH range of error. It comes protective plastic case, PH 4.00 and PH 6.86 buffer solution, and calibration screwdriver. Specifications: Measuring Range: 0-14 pH Resolution: 0.01 pH Accuracy: 0.1 pH Batteries: 4x 1.5V Button Cell (AG-13) Temperature Compensation: 0-50°C (32-122°F) Kindly Reminder: Please make sure liquid level is below 1.5 in when testing. Please do not put the electrode directly against any hard surface. Please only use liquid water for clean purpose, no soft paper, cloth or cotton. Important The instrument's pH range must be recalibrated whenerver: * The electrode has benn used (laid) for long time form the last calibration. * The electrode has been used in particularly taxing conditions. * The utmost accuracy is required. When product is not used for 1 week or more, you should do the calibration opration for accurate reading. For initial use, make sure the meter is shut down, probe in distilled water 1-2 hours to active electrode, then do calibration operation. A pack of calibrated powder should be dissolved in 250ml distilled water, fluid can be sealed and stored in 10-20 ℃，avoid derect light for 3 months. Package Includes: 1 * pH Meter 1 * Adjustment screwdriver 2 * Calibration packets 1 * Carrying case 1 * Manual