Electrodes - Page 48

Manufacturer: Conmed Brand: ConMed

Clear NeoDerm tape allows visual monitoring of the patient's skin condition at all times.Perforated tape permits skin ventilation and moisture evaporation for increased patient comfort.Conductive adhesive gel.Conforms to patient's body without pulling on their skin.Will not absorb fluids.Latex free to protect against possible latex sensitivity issues.The Cleartrace electrode is offered with a durable metal snap

Manufacturer: BND-Conmed Corporation Brand: BND-Conmed Corporation

Electrode Monitoring Blue Sensor T Foam Ag Oval Medium 25/Pk

Manufacturer: American Marine Brand: American Marine

Highest quality, very accurate and dependable. Totally waterproof and compatible with virtually every monitor or controller on the market today. Low drift, fast response, and long life. We recommend replacing your ORP probe every 18 months, and replacing your pH probe when it can no longer be calibrated successfully (usually after 12-18 months). 10' cord.

Manufacturer: Milwaukee Instruments Brand: Milwaukee Color: White

The Milwaukee Pocket-size EC/TDS/Temp Meter is a waterproof, instrument with automatic temperature compensation, automatic one-point calibration, and a dual-level LCD screen that displays both temperature and either conductivity or total dissolved solids (TDS). It comes with the Mi59P probe, which is replaceable. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research.Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity meters are used in research laboratories and a variety of industries, such as water-quality testing, waste-water treatment, hydroponics, agriculture, aquaculture, and cosmetics manufacturing.Milwaukee Instruments manufactures electrochemical instrumentation and solutions for water analysis under the Milwaukee and Martini brands. The company, founded in 1998, is headquartered in Rocky Mount, NC.

Manufacturer: Milwaukee Instruments Brand: Milwaukee Color: White

The Milwaukee Pocket-size EC/TDS/Temp Meter is a waterproof, instrument with automatic temperature compensation, automatic one-point calibration, and a dual-level LCD screen that displays both temperature and either conductivity or total dissolved solids (TDS). It comes with the Mi59P probe, which is replaceable. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research.Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity meters are used in research laboratories and a variety of industries, such as water-quality testing, waste-water treatment, hydroponics, agriculture, aquaculture, and cosmetics manufacturing.Milwaukee Instruments manufactures electrochemical instrumentation and solutions for water analysis under the Milwaukee and Martini brands. The company, founded in 1998, is headquartered in Rocky Mount, NC.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI101

The Hanna Instruments HI 101 is a submersible pH electrode with a double polytetrafluoroethylene (PTFE) junction, polyvinyl chloride (PVC) body, flat tip, double O-ring seals, HI 101/3 adapter, 3m (9.8') cable, a Bayonet Neill-Concelman (BNC) connector, and operates in pressurized systems. A pH electrode is commonly attached to a pH meter to measure the pH of a substance such as water, food, beer, or wine in lab, industrial, and food applications. This electrode has a PTFE junction that reduces sample solution ingress into the reference compartment for longer electrode life. The flat tip eliminates deposits that can foul the electrode and is sealed O-rings for immersion in liquids. The electrode operates in pressurized systems up to 87 psi (6 bar). A female BNC connector provides tight cable connections. The electrode comes with the HI 101/3 adapter and a 3m (9.8') cable.SpecificationspH range0 to 13JunctionDouble PTFEElectrolytePolymerReferenceDouble, Ag/AgClBody materialPVCTip shapeFlatOperating temperature20 to 40 degrees C (68 to 104 degrees F)Maximum pressure87 psi (6 bar)ConnectorBNC femaleCable3m (9.8')An electrode, also called a sensor or probe, is an instrument used with a meter to test and measure parameters of a substance. All electrodes are probes or sensors, but not all probes are electrodes or sensors. Probes, such as temperature probes, are used to penetrate a material for measurement. Common electrode types are pH, total dissolved solid (TDS), and ion selective electrode (ISE). Electrodes can be half-cell or full-cell (also called combination) types. They can be refillable or non-refillable. Housing material is typically glass or epoxy, and sensors are commonly made with stainless steel or a glass bulb. pH electrodes, which measure the pH of a substance, often have a glass bulb. The bulb senses hydrogen ions, and generates a millivoltage that is picked up by the filling solution and transferred to a wire that connects to the pH meter. Ion selective electrodes (ISEs) respond selectively to ions in ...

Manufacturer: Milwaukee Instruments Brand: Milwaukee Model: MISE220

The Milwaukee combination electrode has a double-junction reference to protect against silver wire contamination and to help prevent clogging when testing dirty water and solutions with heavy metals or organics. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings. Its epoxy body is impact resistant, durable, and sealed and filled with an electrolyte solution gel for minimal maintenance. It is available in both pH and ORP models. The pH model has a measurement range of 0.00 to 14.00 pH. The oxidation reduction potential (ORP) model has a platinum sensor for measuring dissolved oxygen in aqueous solutions and a measurement range of +/-2,000 mV. It withstands temperatures from 0 to 70 degrees C (32 to 158 degrees F). The electrode is 12mm in diameter and 120mm long, and has a 1m cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. pH electrodes measure the acidity or alkalinity of a substance. ORP electrodes, also known as redox electrode, measure the ability of aqueous solutions to act as oxidizing or reducing agents. Both pH and ORP electrodes are commonly used by researchers, manufacturers, and hobbyists in hydroponics, aquaculture, agriculture, and winemaking, among other applications. An electrode, also called a sensor or probe, is an instrument used with a meter to test and measure parameters of a substance. All electrodes are probes or sensors, but not all probes are electrodes or sensors. Probes, such as temperature probes, are used to penetrate a material for measurement. Common electrode types are pH, total dissolved solid (TDS), oxidation reduction potential (ORP), and ion selective electrode (ISE). They come in standard models or in all-in-one (sometimes called 3-in-1) models, which have a built-in temperature sensor for automatic temperature compensation (ATC). Electrodes can be half-cell or full- (also called combination) cell type. They can be r...

Manufacturer: Balego & Associates, Inc. Brand: Patients Choice® Model: 741459688257

Soft molded socket connector; Provides superior connection to the lead wire. Only one available in the market. Highly conductive pigtail wire strands; Flexible and durable for multiple uses.

Manufacturer: ProMed Brand: ProMed Model: ProM-049 Color: Silver

1 Pair Conductive Garment Glove, Woven Silver Mesh Fabric for best conductivity, with long lead adapters and 2 snap electrodes. Complete kit to be used with TENS, EMS and other electrical stimulators

Manufacturer: Compex Brand: Compex Model: 6260760

Compex electrodes are used during muscle stimulation with Compex devices. The electrodes play a big part in the Compex muscle stimulation session. They are the points where the pulses are transmitted to your motor nerves, and ultimately your muscle fibers. If the Compex electrodes aren't adhering properly, the electrical pulse can't be delivered at the intensity needed to work your muscle at peak effectiveness.