Surface & Hardness Testing - Page 50

Manufacturer: Tathastu Brand: Tathastu

Tathastu Tablet Hardness Tester Pfizer Type A handy,tough and direct dial reading MGSS10

Manufacturer: Mars International Brand: Mars

Mars International Tablet Hardness Tester Pfizer Type A handy,tough and direct dial reading type

Manufacturer: Boshi Electronic Instrument Brand: Boshi Electronic Instrument

Description LX-A-2 hardness tester is widely applied in the low and medium hardness plastic, all kinds of rubber, multi-dimensional fat, leather, wax hardness test etc. Technical Datas Dial value: 0 ～ 100HA Needle stroke: 2.5 mm Measure range: 10 ～ 90HA Needlepoint size: Ф 0.79 mm Weight: ～ 0.5 kg Note All products have been checked and packaged in good condition before shipping. After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.

Manufacturer: Vetus Brand: VETUS INSTRUMENTS

Function: Fruit penetrometer with 3 models: GY-1,GY-2,GY-3, which special for inspecting the hardness of the fruits, such as apple, pear, strawberry, grape and so on. Judging the harness and mature of the fruits will good for breed, deposited, export, transport, machining, etc.They are wildely used for fruit research department, fruit company, fruit farm, college and so on. Parameter: Range:0.5-12kg/cm 2 (x10 5pa) 1-24kg/cm 2 (x10 5pa) Probe size:Φ8mm Φ11mm Insertion Depth:10mm Resolution: 0.1 0.2

Manufacturer: stanleysupply Brand: stanleysupply

Jtm-69a-c dmm with calibration.

Manufacturer: Gesswein Brand: Gesswein

This handy pocket-size guide can go anywhere. Flash chrome protectant ensures metal specimen surfaces will retain their exact finishes for years. Easy-to-read cross-reference table of S.P.I. and R.A. finishes makes for quick and accurate comparisons. Measures 5-7/8" long x 3-1/2" wide.

Manufacturer: COLE-PARMER Brand: Rex Gauge

Maintain accurate durometer readings with this kit. The kit acts as a quick reference check for the status of your durometer and lets you develop the proper feel for use of the gauge. Includes seven color-coded rubber test blocks of various type A hardness values ranging from 30 to 90 durometer.

Manufacturer: Checkline Brand: Checkline

Checkline TBKC-D Type D Test Block Kit with NIST traceable certificate To obtain accurate readings using a durometer, one must develop the proper "feel" for the gauge. Check-line's Durometer Test Block Kits gives the user the ability to develop the proper "feel", and, while they are not to be used for calibration purposes, they enable the user to perform a quick check for proper durometer operation. A large variation would indicate the need for recalibration of the durometer being utilized. This should be done in accordance with the methods indicated in ASTM D-2240. The kit consists of color coded test blocks each of which measures 1/4" x 2" x 2". The kit is supplied in a sturdy foam-fitted carrying case with the true readings for each block on the inside cover of the case and a NIST traceable certificate conformance.

Manufacturer: Trane Brand: Trane

Trane, American Standard Hot Surface Ignition (HSI) Conversion Replacement

Manufacturer: Teren Brand: teren

Features: * Manual or automatic shut down. * Metric /Imperial Conversion. * Use USB data output and RS-232 data output to connect with PC. * Provide Bluetooth data output choice. Display: 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz Measuring Range: Ra: 0.05~10.00 um / 1.000~400.0 uinch Rz: 0.020~100.0 um / 0.780~4000 uinch Accuracy: less than or equal to +- 10% Fluctuation of display value: Not more than 6% Sensor-Test Principle: Inductance type Sensor-Radius of Probe Pin: 10 um Sensor-Material of Probe Pin: Diamond Sensor-Dynamo-measurement of Probe: 16 Mn(1.6 gf) Sensor-Probe Angle: 90 degree Sensor-Vertical Radius of Guiding Head: 48 mm Sensor-Maximum driving stroke: 17.5 mm / 0.7 inch Sensor-Cutoff length: 0.25 mm / 0.8 mm / 2.5 mm optional Driving speed-Sampling: When Length = 0.25 mm, Vt = 0.135 mm/s; When Length = 0.8 mm, Vt = 0.5 mm/s; When Length = 2.5 mm, Vt = 1 mm/s Returning: Vt = 1 mm/s Profile digital filter-Filtered Profile: RC, PC-RC, GAUSS Non-Filtered Profile: D-P Resolution: 0.001 um, if reading less than 10um; 0.01 um, if 10um less than or equal to reading less than or equal to 100um; 0.1 um, if reading great than or equal to 100um Evaluation length: 1~5 L optional Auto Power Off Data Memorize: 7 Groups Operating conditions: Temperature: 0~50 degree Humidity: less than 80%RH Power Supply: Built-in rechargeable Li-ion battery Dimensions: 140 x 52 x 48 mm Weight: 420 g Package includes: 1. Main Unit 2. Small Screwdriver 3. Power Adapter 4. Standard Sample Plate 5. Standard Sensor 6. Adjustable Leg 7. Sheath of Sensor 8. Carrying Case 9. Instruction Manual