Leak Detection Tools - Page 24

Manufacturer: Matheson Brand: Matheson

Detector tubes are formulated with high purity chemical reagents which absorb and react with the gas or vapor being measured. The reaction causes a colorimetric stain which varies in length to the concentration of the gas or vapor being measured. The length of stain is normally read directly off a scale printed on each tube.

Manufacturer: Reed Brand: REED Instruments Model: GS-400

Ultrasonic transmitter for use with GS-5800 ultrasonic leak detector. Sends a 40 kHz signal which, when detected by the GD-5800, indicates the location and magnitude of a leak.

Manufacturer: ArrowTech Brand: S.E. International Inc Model: PEN20RB Color: Grey

The advanced PEN direct reading dosimeters are rugged, precision instruments. They are higher quality and have greater reliability than other dosimeters of this type. They measure and directly read, at any time, accumulated dose (quantity of gamma and x-ray exposure). PEN dosimeters are designed to satisfy military specifications for the RADIAC METER IM-264/PD and ANSI N 13.5 and N322 requirements. A sturdy metal clip attaches the dosimeter to a pocket or any object to monitor total radiation exposure. They are hermetically sealed and immersion proof. Energy Dependence ±10% maximum change in sensitivity for x and gamma ray energies from 16 keV to 8 MeV. Electrical Leakage In the absence of radiation, the dosimeters leakage or self discharge is less than 0.5% of full scale in 24 hours at 50° C. At 20° C dosimeters will read background radiation. After gross over exposure totaling up to 2000 R, the leakage is less than 5% of full scale in 48 hours at 20° C. Thereafter, the leakage will decrease to original values. Charging Voltage Dosimeters are capable of being charged to zero with 140 to 195 volts. Operational Characteristics A maximum change in sensitivity of ±10% may occur under any probable combination of the following: A) Temperature range below -20°C (-4°F) or above +50°C (122°F) B) Greater than 50,000 foot altitude for one month C) Relative humidity greater than 95% Highly resistant to shock and vibration. Accuracy ±10% of true dose for Cs-137 or Co-60 gamma. Rate Response Dosimeters are dose rate independent. Enclosure Material Barrel - carbon fiber-filled, high-strength, electrically-conducting plastic with metal clip. Weight Approx. 19 grams (0.7 oz.) Size PEN- 200, 500 2mSv, 5mSv Length: 11 cm (4.48 inches) Diameter: 1.5 cm (0.6 inches) PEN- 2, 5, 20 Length: 11.5 cm (4.52 inches) Diameter: 1.5 cm (0.6 inches). Options Protective sapphire lens. Warranty 2 year limited warranty.

Manufacturer: Industrial Parts House Brand: industrial Parts House

Manufacturer: Bacharach, Inc. Brand: Bacharach Model: 0019-7061

Bacharach 0019-7061 Carbon Monoxide (CO) sensor for Snifit Carbon Monoxide Analyzer

Manufacturer: KEMPER SYSTEM AMERICA, INC. Brand: CANTESCO® Model: 100-5G Color: Yellow

Regular temperature solution for detection of leaks in compressed air and gas systems.

Manufacturer: Bacharach Brand: Bacharach

Bacharach 0024-3004 Probe & hose assembly w/sample, draft & thermocouple lines (for PCA2, Fyrite INSIGHT, Pro 125, PCA 25, 35, 55 & 65)

Manufacturer: SMART SENSOR Brand: Smart Sensor

Manufacturer: Rheem Brand: Protech Model: 62011

Powder Coated cylinder for high gloss, durable finish and collar design for ease of handling. Tank is re-usable and conforms to DOT-4BA400 specifications and ARI guidelines. For storage and transport of recovered refrigerant gases. .

Manufacturer: Mastercool Brand: Mastercool

Mastercool 55800 Intellasense Refrigerant Leak Detector High Sensitivity detects all refrigerants (CFC’s, HCFC’s, & HFC’s) with its new metal oxide gas sensor and fast response time. The Mastercool 55800 features a 2,000-hour sensor life, 16” flexible probe, detailed colored LCD display, and high/medium/low sensitivities. Characteristics: Mastercool 55800 Intellasense Refrigerant Leak Detector High Sensitivity   Detects all CFC refrigerants, HCFC refrigerants, and HFC refrigerants   Sensitivity levels: High [= 0.05 oz/yr (1.5 g/yr)] Medium [= 0.25 oz/yr (7 g/yr)] Low [= 0.5 oz/yr (14 g/yr)]   Even works with R123yf, R32, R407C, and R410a   2,000 hour sensor life   Unique tip design eliminates false alarms by sensing the condition of the environment   16" Flexible probe   Attractive display with LCD vertical bars for leak levels and selected sensitivity range   Attractive LCD displays WAIT mode to indicate warm up, READY to indicate the unit is ready to measure, INT to indicate poor external measurement conditions or damaged unit, battery indication, H[igh] M[edium] L[ow] to indicate selected sensitivty range, codes E1-E9 for diagnostic error codes, and Green, Yellow, and Red vertical signal bars   Keypad features ON/OFF, Volume/Mute, H[igh] M[edium] and L[ow] for sensitivity, HOLD to freeze signal bars, and PEAK   Runs off of (2) D Batteries; 60 hours continuous use runtime   Meets and exceeds J2791 (R134a), J2913 (R1234yf) and EN 14624   Warranty: 1 year manufacturer's warranty   Includes: Blow molded carrying case, (2) D batteries, leak test vial, and replacement filters