Leak Detection Tools - Page 30

Manufacturer: Sensit Technologies Brand: Sensit Technologies

Technical Specification Item Hot Air Probe Diameter 1-5/8 Length 47-7/8 For Use With Mfr. No. 909-00000-B, 909-00000-E, 909-00000-F, 909-00000-H, 910-00100-B, 910-00100-E, 910-00100-F, 910-00100H Includes Hose Assembly This listing is for each.

Manufacturer: ArrowTech Brand: S.E. International Inc Model: PEN5RB Color: Grey

The advanced PEN direct reading dosimeters are rugged, precision instruments. They are higher quality and have greater reliability than other dosimeters of this type. They measure and directly read, at any time, accumulated dose (quantity of gamma and x-ray exposure). PEN dosimeters are designed to satisfy military specifications for the RADIAC METER IM-264/PD and ANSI N 13.5 and N322 requirements. A sturdy metal clip attaches the dosimeter to a pocket or any object to monitor total radiation exposure. They are hermetically sealed and immersion proof. Energy Dependence ±10% maximum change in sensitivity for x and gamma ray energies from 16 keV to 8 MeV. Electrical Leakage In the absence of radiation, the dosimeters leakage or self discharge is less than 0.5% of full scale in 24 hours at 50° C. At 20° C dosimeters will read background radiation. After gross over exposure totaling up to 2000 R, the leakage is less than 5% of full scale in 48 hours at 20° C. Thereafter, the leakage will decrease to original values. Charging Voltage Dosimeters are capable of being charged to "zero" with 140 to 195 volts. Operational Characteristics A maximum change in sensitivity of ±10% may occur under any probable combination of the following: A) Temperature range below -20°C (-4°F) or above +50°C (122°F). B) Greater than 50,000 foot altitude for one month. C) Relative humidity greater than 95% Highly resistant to shock and vibration. Accuracy ±10% of true dose for Cs-137 or Co-60 gamma. Rate Response Dosimeters are dose rate independent. Enclosure Material Barrel - carbon fiber-filled, high-strength, electrically-conducting plastic with metal clip. Weight Approx. 19 grams (0.7 oz.) Size PEN- 200, 500 2mSv, 5mSv Length: 11 cm (4.48 inches) Diameter: 1.5 cm (0.6 inches) PEN- 2, 5, 20 Length: 11.5 cm (4.52 inches). Diameter: 1.5 cm (0.6 inches) Options Protective sapphire lens. Warranty 2 year limited warranty.

Manufacturer: Testo AG Brand: Testo Model: 0632 3172 Color: Multicolored

Testo shows gas concentration in visual bar display. Sensor self-test following switch-on. Audible confirmation of readiness to operate. Increasing alarm sounds with increasing gas concentration. Continuous sound if alarm threshold is exceeded. Battery monitoring with optical display. Self-test function. 2 batteries type micro AAA 1.5 V (LR03), 4 h (LR03) battery life, t90: less than 5 s. Opening temperature -5 to +45 degree C.

Manufacturer: Standard Plumbing Supply Brand: E Instruments Model: 7899 Color: Multicolored

The New Model 7899 Portable Gas Leak Detector is a rugged, highly-sensitive, accurate and easy-to-use leak tester with an LED display, scale and audible beeper to effectively pinpoint small leaks of Combustible gas hydrocarbon fuels from any piping and/or appliances. Inaccessible points can be reached with the flexible, 11″ long probe.

Manufacturer: Megger Brand: Megger Model: 569001-7

The Megger 569001-7 ultrasonic tone generator helps detect leaks in tanks, pipes, and sealed containers in automotive, plumbing, and heating, ventilation, and air-conditioning (HVAC) applications. The unit is placed inside the empty enclosure to be tested, and it emits a 40-kilohertz frequency that is detected by the Megger 569001-KIT ultrasonic leak and corona detector (not included). It operates on one 9-volt battery (included) and measures 3.5 x 2.5 x 1.75 inches (89 x 57 x 44 mm, H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back).Leak detectors are used in mechanical, automotive, petrochemical, wastewater treatment, plumbing, electrical, and heating, ventilation, and air conditioning (HVAC) applications to locate the source of a leaking gas or liquid. Simple leak detectors use dyes, pH- or chemically reactive indicators, or a foaming substance to find leaks in pipes, tubes, fittings, tanks, and cylinders. More complex leak detectors have electronic sensors that measure the concentration of leaked gas or liquid in an area to pinpoint the source of leaks, determine the type of gas present, monitor air quality, and detect electrical corona or failing valves, bearings, and solenoids.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) standard 9001:2008.

Manufacturer: Rheem Brand: Protech Model: 55200

This revolutionary new design allows the user to perform electronic and UV leak detection all with one tool. The "inspector" offers six levels of sensitivity 15 levels of detection with a tri-colored LED indicator. This allows the "inspector" to pin-point leaks as small as 1/10 oz per year. The Ultra bright UV light is built into the end of the probe allowing easy access into tight areas. Incorporating both electronic and UV technology into one unit insures that even the toughest leaks can be found.

Manufacturer: BRIGHT SOLUTIONS INTERNATIONAL LLC Brand: BRIGHT SOLUTIONS INTERNATIONAL LLC

Leak Detection Injection Gun Pro-Shot-3Pack.

Manufacturer: Bacharach, Inc. Brand: Bacharach Model: 0019-0497 Color: Multicolored

Its unique combination of state-of-the-art sensor technology, advanced software design, and microprocessor-controlled circuitry offers you unmatched precision coupled with tremendous speed. It is unquestionably the most sensitive, most reliable, most accurate leak detector on the market today. And the fastest. Swap sensor tips within seconds and never worry about adjusting sensitivity levels - it's taken care of automatically, even where high levels of background vapors or refrigerants are present. The leak detector features an audible indicator with mute option, coupled with sequential LEDs to monitor increasing concentrations of refrigerant or combustible gases. Dual bar graph displays offer visual confirmation no matter what position the instrument is in. And a flashing light at the tip of the probe helps to visually define your sampling location. Lightweight and ergonmically designed Swap sensor tips in seconds Microprocessor controlled for accuracy and reliablity Sensitivity is automatically adjusted Sensors are the industry's most responsive Hydrophobic filter prevents moisture contamination Sequential flashing probe tip, dual LED displays and loud tick rate indicate relative concentration levels Response time is two-tenths of one second Probe length adjustable from 3" to 20" What's Included: Carrying case and four AA batteries.

Manufacturer: Matheson Brand: Matheson

The Full Turn Valves are recommended for high purity applications. These diaphragm valves have multiple metal diaphragms which provide a seal of passing a helium leak test to 2x10-8 scc/sec.

Manufacturer: Matheson Brand: Matheson

The Full Turn Valves are recommended for high purity applications. These diaphragm valves have multiple metal diaphragms which provide a seal of passing a helium leak test to 2x10-8 scc/sec.