Pressure Calibrators - Page 15

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919215

BetaGauge PI PRO Digital Test Gauge takes the concept of an analog Test Gauge, and brings it to a new level. The NEW BetaGauge P. I. PRO combines the accuracy of digital technology with the simplicity of an analog gauge and achieves performance, ease-of- use, and a feature set unmatched in the pressure measurement world. The BetaGauge PI PRO builds on the proven performance of the BetaGauge PI with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor. An optional external 24 VDC power input is available for applications where the BetaGauge P. I. PRO will be permanently incorporated into a process line. A protective rubber boot is standard to help protect the BetaGauge P. I. from damage when dropped.

Manufacturer: Fluke Brand: Fluke Model: 4629301

A fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect enabled units.

Manufacturer: Fluke Corporation Brand: Fluke Model: 700G/TRACK

Software for the 700G Pressure Test Gauges. Manage your instruments and calibration data with this easy-to-use software. For use with 700G Series gauges to perform real time data logging. Enables data download and logging configurations to the 700G Series gauges for a remote logging event. Configure logging event reading rate, duration and measurement units. Upload measurements logged remotely and display or export measurements. Includes communication cable for connection to a PC and CD-Rom user manual.

Manufacturer: GE Druck Brand: GE

Manufacturer: Fluke Corporation Brand: Fluke Model: 3889490

Fluke TPS FLEX 24 flexible current probe, 45 to 3.0 kHz Frequency Range. Measuring range selectable per software: 1 to 100 A and 5 A to 500 A. Peak current for sinusoidal currents, 240 A, 1350 A. Intrinsic error: 1 percent. Frequency range: 45 Hz to 3.0 kHz. Operating voltage: 300 V CAT IV Phase Error: 0.5 degrees. Jaw Opening: 45-centimeters length, 2-meter cable.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-287/FVF

Fluke-287/FVF Kit includes Fluke-287 true-rms electronic logging multimeter with trendcapture, FlukeView forms software and cable, 80BK-A Thermocouple probe. CAT III 1000V 10A Modular test leads (red, black), CAT III 1000V 10A modular test probes (red, black), CAT II 300V 5A Alligator clips (red, black). C280 Soft case for meter protection and accessory storage. Maximize productivity with the combined Fluke 287 and FlukeView forms combo kit. Designed for today's professionals involved in the R and D, maintenance, manufacture and design of electronic circuits or systems. With built-in data logger and trendcapture capability, the 287 helps you track down elusive, intermittent problems or monitor equipment with any of its function. FlukeView forms enabling you to document store and analyze individual readings or series of measurements, overlay logged data to find cause and effect relationships, or turn your data into meaningful graphs and tables for a professional report. The 287/FVF combo kit gives you a practical and affordable approach to documenting circuit design performance.

Manufacturer: Fluke Brand: Fluke Model: 4325155

Fluke earth ground testers provide quick, accurate impedance measurements through several test methods: 3- and 4-pole Fall-of-Potential testing, selective testing, stake less testing and 2-pole testing.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-572-2 Color: Multicolored

Fluke FLUKE-572-2 High-Temperature Infrared Thermometer with Dual Laser, -30/900°C Temperature Range Fluke 572-2 High-Temperature Infrared ThermometerView larger Fluke 572-2 High-Temperature Infrared ThermometerView larger For Higher Temperatures at Greater Distances The 572-2 has the largest temperature range and greatest distance-to-spot ratio of any of Fluke's IR thermometers. The dual-laser sighting system clearly shows the diameter of the area being measured for greater confidence in your readings. A 900°C (1652°F) maximum temperature makes the 572-2 suitable for many industrial environments including petrochemical, metal refining and smelting, power utility, cement and glass. Accuracy that's Easy to See With a 60:1 distance-to-spot ratio, the 572-2 is perfect for measuring temperatures in unreachable places. Whether its an air duct on the ceiling of a warehouse or a transformer on the top of a power pole, the dual lasers will clearly show you the diameter of the area you are measuring. Data Collection Save time in recording with the on-board memory of the 572-2. It can record up to 99 infrared temperature readings for later download to computer via USB cable. Easy Options for Emissivity Because adjusting emissivity is critical to accurate temperature readings, the 572-2 offers three ways to help. Select an emissivity manually from 0.10 to 1.00, use the K-type probe to match the IR reading with the contact reading, or use the built-in common materials table to best match the surface of measurement. Features Measure -30 °C to 900 °C (-22 °F to 1652 °F) 60:1 distance to spot ratio with dual laser sighting for fast, accurate targeting Multi-language interface (user select) Current Temperature plus MAX, MIN, DIF, AVG temperature displays Compatible with standard mini-connector K-type thermocouples, including ones you already own and have installed Adjustable emissivity and predefined emissivity table Infrared and thermocouple temperature on backlit display Last reading Hold ...

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919611

As with the original high accuracy BetaGauge P.I. PRO gauges, the BetaGauge PIR PRO takes the concept of a simple analog Test Gauge and combines it with the accuracy of digital technology. The new Reference Class gauges provide exceptional performance with ±0.04% of reading accuracy, especially when operated below 50% of their range. The BetaGauge PIR PRO builds on the proven performance of the BetaGauge PIR with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor

Manufacturer: Fluke Corporation Brand: Fluke Model: I6000S FLEX-36

The i6000sflex is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 6000A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Current ranges: 60A/600A/6000A AC rms. Output sensitivity (AC coupled): 50 mV /5mV / 0.5mV per A. Load impedance: 100 k ohm minimum. Accuracy (at +25 degree C): +/-1 percent of range (45 - 65 Hz). Linearity (10 to 100 percent of range): +/-0.2 percent of reading. Noise: 8mV AC rms (60 A), 2 mV AC rms (600/6000A). Frequency range: 10 Hz to 50 kHz (- 3 dB). Phase error: < +/-1 degree (45 – 65Hz), +/-10 degree (at 20 kHz). Position sensitivity (with cable > 25mm from the coupling): +/-2 percent of range. External field (with cable > 200mm from the head): +/-1 percent of range. Power supply: 2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply. Temperature coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600 V AC rms or DC. Head cable diameter: 14.3mm. Cable length (head to electronics): 2 meters. Operating temperature range: -20 to +90 degree C (head), -20 to +85 degree C (electronics). Storage temperature range: -40 to +105 degree C (head), -20 to +85 degree C (electronics). Operating humidity: 15 to 85 percent (non condensing).