Pressure Calibrators - Page 29

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: PX3228

Electronic Pressure Sensor, Measuring Range: 0...100 Inh2O, Process Connection: 1/4''Npt A / M5 I, 2-Wire, Dc, Operating Voltage: 9,6...32 V Dc, 4...20 Ma, Quick Disconnect, M12 Connector, E1 Compliant, Housing Material: Stainless Steel 316L / 1.4404 Fpm (Viton) Pa Epdm/X (Santoprene), Materials (Wetted Parts): Stainless Steel (303S22) Ceramics Fpm (Viton).

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 840099

Automatically log up to 12,000 readings with date and time stamps and download them to your computer or manually record and review 99 readings on the meter’s display.

Manufacturer: Taylor Brand: Taylor Precision Products Model: 44S390

The Taylor Pressure Calibrator with Carrying Case is compact, accurate and easy to use, perfect for professionals on the go. Marked for 0- to 118-inches of water, this calibrator is capable of a wide range of pressure readings. The 1-3/4-inch dial is marked with clear white graphics on a black background for easy reading. A bright red-tipped pointer allows for at-a-glance measurements. The calibrator can be used as an alternative to a monometer for calibrating pressure instruments. This pressure calibrator comes with its own convenient carrying case for ease of storage and transport.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530843

Fluke smart battery pack for handheld vibration tester.

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919162

BetaGauge PI PRO Digital Test Gauge takes the concept of an analog Test Gauge, and brings it to a new level. The NEW BetaGauge P. I. PRO combines the accuracy of digital technology with the simplicity of an analog gauge and achieves performance, ease-of- use, and a feature set unmatched in the pressure measurement world. The BetaGauge PI PRO builds on the proven performance of the BetaGauge PI with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor.

Manufacturer: Taylor Brand: Taylor Precision Products Model: 44S369

The Taylor Pressure Calibrator with Carrying Case is compact, accurate and easy to use, perfect for professionals on the go. Marked for 0- to 160-inches of water, this calibrator is capable of a wide range of pressure readings. The 1-3/4-inch dial is marked with clear white graphics on a black background for easy reading. A bright red-tipped pointer allows for at-a-glance measurements. The calibrator can be used as an alternative to a monometer for calibrating pressure instruments. This pressure calibrator comes with its own convenient carrying case for ease of storage and transport.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP291

Li-Ion double capacity battery pack. For 190-series II ScopeMeter test tool. 4800 mAh Capacity.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2648370

Fluke Flexcam thermal imager case.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-54-2 B 60HZ

The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40" cables that measure from -40 to +260 degrees C (-40 to +500 degrees F). It can store up to 500 points of data for analysis and monitoring, and it has an infrared communication port for exporting data to a computer for analysis. This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset function that allows the operator to compensate for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it comes in a holster that absorbs impact to help protect against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactivity to help preserve battery life. It conforms to National Institute of Standards and Technology (NIST) standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial and manufacturing environments. Specifications Type K temperature range -200 to +1372 degrees C (-328 to +2501 degrees F) Type J temperature range -210 to +1200 degrees C (-346 to +2192 degrees F) Type T temperature range -250 to +400 degrees C (-418 to +752 degrees F) Type E temperature range -150 to +1000 degrees C (-238 to +1832 degrees F) Type N temperature range -200 to +1300 degrees C (-328 to +2372 degrees F) Type R and Type S temperature range 0 to 1767 degrees C (32 to 3212 de...

Manufacturer: Fluke Calibration Brand: Fluke Model: P5531-3.5M

Dirt/moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected particle contamination or fluid inside the device under test will be prevented from entering the deadweight system, avoiding downtime for maintenance or repair. Designed for operation in the vertical position these traps are simple to dismantle and easy to clean. Designed to mount directly on the deadweight tester and featuring an acrylic chamber for visibility of contaminates this unit utilizes the standard test port adapters for easy instrument connections.