Pressure Calibrators - Page 30

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-11

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 15.00 PSI Range.

Manufacturer: Fluke Brand: Fluke Model: 4629295

A fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect enabled units.

Manufacturer: Fluke Corporation Brand: Fluke Model: I3000S FLEX-24

The i3000s Flex is an ac current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Three ranges: 30A, 300A and 3000A, 1, 10 or 100 mV/A output. Ideal for current measurement on thick and hard to reach conductors without breaking the circuit. Maximum conductor diameter 178mm. CAT III 600V safety rating. Output sensitivity (AC-coupled): 100 mV, 10 mV, 1 mV per A. Load impedance: 100 kilo ohm minimum. Accuracy at +25 degree C: +/-1 percent of range (45 Hz to 65 Hz). Linearity 10 to 100 percent of range: +/-0.2 percent of reading. Noise: 8 mV AC rms (30 A), 2 mV AC rms (300A, 3000A). Frequency range: 10 Hz to 50 kHz (-3 dB). Phase error: less than +/-1 degree (45 Hz to 65 Hz), +/-10 degree (at 20 kHz). Position sensitivity with cable greater than 25 mm from the coupling: +/-2 percent of range. External field with cable greater than 200mm from the head: +/-1 percent of range. Power supply: 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply. Temperature Coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600V AC rms or DC. Head circumference: 610mm. Head cable diameter: 14.3mm. Head bend radius: 38.1mm. Cable length (head to electronics): 2m. Output connection: 0.5m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter. Operating temperature range: -20 to +90 degree C (-4 to 190 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Storage temperature range: -40 to +105 degree C (-40 to 221 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Operating humidity: 15 to 85 percent (non-condensing).

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM201-DN200

Meriam's M201 has new features to make drop testing rotary (natural) gas meters even easier. New hardware options protect the M201 from one sided overpressure. Options include a 1/4 turn valve manifold and an integral push-to-read cartridge valve in addition to the traditional push-to-read valve manifold. More importantly, new operating features provide users with a live pressure display and more automation to make field use easier than ever before. The new Measure Mode lets the M201 be used as a conventional differential pressure measurement device. Users will appreciate the live pressure display as they check the handheld's zero or observe DP across rotary gas meters. And when a drop test is made, the M201 uses an internal stop watch to measure the test length. The user only has to start and stop the test; the M201 reports both the test time and the average differential pressure measured during the test. Toggle the Min/Max key to see the minimum and maximum DP measured during the test. User selectable shut-off. Programmable at 10, 20, 30, 45, 60 minutes and disable. User selectable shut-off. Programmable at 10, 20, 30, 45, 60 minutes and disable. 14 Ounce (6.9" by 3.8" by 2.3") polycarbonate, permanently dissipative, ESD protection. Sealed membrane type with 5 dome contact style buttons. 5 Significant digit LCD (0.25" high) 2 line x 16 alphanumeric characters with contrast adjustment. Backlight included. 4 Each AA batteries providing over 100 hours of continuous use. 1/8" Female NPT connection. NIST Traceable accuracy: + 0.05 percent FS 0-200" H2O.

Manufacturer: Fluke Brand: Fluke Model: 4636967

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent PREP PRESSURIZED IN ASSY - AA

Manufacturer: Fluke Corporation Brand: Fluke Model: 80I-110S

The 80I-110s is compatible with any fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter. It also compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter. It is designed to provide you with safe, high accuracy measurements for a wide range of applications. The specially designed built-in safety features such as the 600 V rms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. Safety rating: IEC 1010 and CSA-C22.2 No. 1010-1 installation category II, working voltage 600V. Output signal: 10A range: 100mV/A; 100A range: 10mV/A. Bandwidth: 1Hz to 20kHz. 10 A, AC/DC, 100 A, AC/DC Nominal current range. 0.1A - 10A AC/DC and 1A - 100A AC/DC Continuous current range. 140 A - 2 kHz Maximum non-destructive current. 3 percent + 50 mA (at 10 A) basic accuracy. DC - 100 kHz Useable frequency. 600 V maximum voltage. 9 V, 55 h battery life. 11.8mm conductor diameter. 1.6m output cable length. 1 year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1630

Earth ground loop resistance measurements for commercial, industrial, and utility applications. The clamp-on ground testing technique used by the Fluke 1630 simplifies ground loop testing and enables non-intrusive leakage current measurement. The compact and rugged design makes the Fluke 1630 easy to use in small places and harsh environments, while the ‘display holdâ€TM and the continuity testing with an audible alarm function ensures convenience in use. The novel technique means that earth ground loop testing and continuity testing can be completed without breaking the circuit.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-TI-TRIPOD3

Fluke FLK-Ti-TRIPOD3 Tripod Mount Base Accessory/Holder for Fluke Ti200, Ti300, and Ti400 Thermal Infrared Camera Series

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX-v3000-KIT

The CNX v3000 AC Voltage Kit is part of the Fluke team of wireless test tools.Connect the CNX v3000 AC Wireless Voltage Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels.  Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously with results sent to a PC for further analysis.Fluke CNX V3000 Kit includes Multimeter, Voltage Module, and accessories.