Dimensional Calibration - Page 12

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613201-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 53-672-036-0

The Fowler 53-672-036-0 an economy version of our deluxe Fowler Gage Block Sets, featuring ±.000050" (fifty millionths) accuracy and a very significant price savings. Fowler "Economy/Workshop" grade Gage Block Sets are identical to our standard sets in all respects, except for the wider range of tolerance which is more than adequate for a majority of shop needs. Blocks are rectangular, constructed of the finest grade of high carbon/chrome steel, fully stress relieved, hardened to 65 RC, lapped and mirror polished to a very low micro-surface finish. Blocks feature a low coefficient of thermal expansion, and they are carefully inspected for accurate size, parallelism and flatness. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613634-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calib...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-935-26

The Mitutoyo 516-935-26 gage block set includes 9 grade AS-1 steel rectangular gage blocks with nominal size engraved in inches. Blocks included in the set measure .0625", .100", .125", .200", .250", .300", .500", 1", and 2". Grade AS-1 gage blocks are often used for calibrating and inspecting tools, instruments, and manufacturing gages. Gage blocks (also called gauge blocks, Jo blocks, slip gauges, and Johansson gauges) are precision ground metal or ceramic blocks, used for calibrating measuring equipment and standardizing the measurement of length in manufacturing. Gauge blocks are square or rectangular in shape, with flat surfaces, and have an engraved unique identification number and length (provided in either inches or millimeters). They often come in sets with blocks of varying lengths, so that many different standard lengths can be created by stacking and wringing them. Wringing is the process of sliding blocks together with a small amount of oil, in order to create a longer surface. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. They are kept within a protective case, cleaned thoroughly between uses to prevent corrosion, and kept free of burrs and other damage that would decrease their accuracy. Temperature is another important consideration. Some gage blocks are vulnerable to thermal expansions and must be kept at room temperature (about 68 degrees F) to ensure their accuracy. Gauge blocks are available in different grades, which refer to their tolerance or deviation from their nominal dimension. Grades are defined by the American National Standard for gauge blocks, the American Society of Mechanical Engineers (ASME) B89.1.9M for both length and flatness. Different grades are appropriate depending on the application and the required level of accuracy. ASME B89.1.9M also defines standards for parallelism and surface finish. A certificate of inspection and calibr...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 53-672-081-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Starrett Brand: Starrett Model: 568A

Manufacturer: Starrett Brand: Starrett Model: 83030

The use of surface plate covers to protect precision granite investment. Prevent abrasive build up on plates with cover made from heavy gauge vinyl with a soft interior lining. Cover provide a tough, durable, protective outside with a soft cushion inside.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 53-762-101-0

Fowler's Portable Durometer is just right for testing the hardness of flexible materials such as rubber and plastics. These gages conform to shore scales. Test pieces should have a thickness of at least .20"/5mm to provide accurate readings that conform to Shore A hardness scales and at least .12"/3mm for Shore D hardness scales. Manufactured in accordance with DIN, ASTM, ISO and JIS specifications. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.   Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Starrett Brand: Starrett Model: 567

Complete set with 1 V-block and 1 clamp. The block has four 3/8-16 tapped holes, two in the base and one on each side for attachment to an angle iron. The angle iron holding the block can then be attached to a lathe faceplate or held by a magnetic chuck. The block is hardened and precision ground. The sides are parallel and the V is central and parallel to the sides and base.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-103-26

The Mitutoyo 516-series Grade 0 Steel Rectangular Inch Micrometer Inspection Gage Block Set includes a set of rectangular-shaped, high-carbon, high-chrome steel gage blocks with nominal length engraved in metric [millimeter (mm)] unitson each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade 0 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Micrometer inspection gage blocks are sized for use with a Mitutoyo Micro Checker (sold separately). Grade 0 gage blocks are commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. High-carbon, high-chrome steel has a high hardness for minimum deterioration, and is selected for its wear-resistance. Rectangular-shaped blocks provide accurate wringing. The nominal length of each block is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, J...