|
|
-
3.8 of 5.0 with 37 Reviews
SALE PRICE: $1,960.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-499
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-499
Step value between adjacent blocks: 300µm, 100µm, 50µm, 20µm
-
3.8 of 5.0 with 4 Reviews
SALE PRICE: $2,095.50
Manufacturer: Starrett
Brand: Starrett
Model: 81572
Manufacturer: Starrett
Brand: Starrett
Model: 81572
Angle plates provide a convenient and practical means of clamping and holding work in a vertical position. Their excellent finish and flatness make them very compatible for use with granite surface plate accuracies. The angle plates are available with either 2 or 4 finished faces. The 2-face angle plate has the bottom and the adjacent square face finished flat and square to one another.
-
3.8 of 5.0 with 45 Reviews
SALE PRICE: $2,140.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-605
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-605
The Mitutoyo 516-605 gage block accessory set includes 14 pieces for assembling rectangular gage blocks over 100 mm into a precision measuring instrument. The set includes (5) gage block holders, (3) adapters, (1) base, (2) half round jaws, (2) plain jaws, and (1) scriber point, in a wood case. Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.
-
3.8 of 5.0 with 30 Reviews
SALE PRICE: $2,184.50
Manufacturer: Starrett
Brand: Starrett
Model: 82240
Manufacturer: Starrett
Brand: Starrett
Model: 82240
-
3.8 of 5.0 with 29 Reviews
SALE PRICE: $2,188.45 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 82238
Manufacturer: Starrett
Brand: Starrett
Model: 82238
-
3.8 of 5.0 with 46 Reviews
SALE PRICE: $2,395.00 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-402-26
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-402-26
|
The Mitutoyo 516-series Grade 0 Steel Square Inch Gage Block Set includes a set of square-shaped, high-carbon, high-chrome steel gage blocks with nominal length engraved in inches on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade 0 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Grade 0 gage blocks are commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. High-carbon, high-chrome steel has a high hardness for minimum deterioration, and is selected for its wear-resistance. These gage blocks have a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. The nominal length of each block is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measur...
-
3.8 of 5.0 with 3 Reviews
SALE PRICE: $5,688.50 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 80886
Manufacturer: Starrett
Brand: Starrett
Model: 80886
Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.
-
3.8 of 5.0 with 33 Reviews
SALE PRICE: $8,769.90 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 80892
Manufacturer: Starrett
Brand: Starrett
Model: 80892
Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.
-
3.7 of 5.0 with 18 Reviews
SALE PRICE: $5.99 2% OFF
Manufacturer: ADC
Brand: ADC
Manufacturer: ADC
Brand: ADC
Gauge Retaining Ring for #802
-
3.7 of 5.0 with 49 Reviews
SALE PRICE: $6.50 2% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Individual Precision Grade Gage Ball Size: 1.0625 (1-1/16). Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inch and metric sizes available.
|
|