Dimensional Calibration - Page 166

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611600-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: Starrett Brand: Starrett Model: G-81802

Well suited for layout work and supplies an easily portable reference for gaging small parts. Small precision surface plates for many inspection and checking uses throughout the plant.

Manufacturer: Flexbar Brand: Flexbar

V-Blocks - Matched pairs. Made of High Quality Fine grained Cast iron, stress relieved. Ideal for Holding round and irregular shape parts in drilling, machining, inspection, etc. Accurately Machined With 90° Vee in Center. Machined parallel to base within .001". Supplied and priced in matched pairs.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619033

Optional accessory for rectangular gage block.

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: HHIP Brand: HHIP Model: 3402-0212

Convenient clamping slots for mounting and are widely used for machining, layout and inspection. Made of high tensile cast iron properly seasoned against distortion. Open-End style, accurately machined square and parallel on all faces. Slot A is 90 degrees to slot C.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-525

Tolerance between the nominal size and the actual diameter: +/- 0.01mm for 1 - 45mm diameter setting rings; +/- 0.0004" for 0.1" - 1.8" diameter setting rings, Cylindricity: 1.0 micrometer for 1 - 45 mm diameter setting rings; 0.00004" for 0.1" - 1.8" diameter setting rings.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 615191-551

The Mitutoyo grade AS-2 square wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to...

Manufacturer: Mitutoyo Brand: Mitutoyo

MIC, OUTSIDE, 7-8", 0 .0001", R