Angle Gauges - Page 14

Manufacturer: INSIZE Brand: INSIZE Model: 4806-20

Angle gage, 1°-45°.

Manufacturer: Junyushiye Brand: Junyushiye

Features: Wide measuring range of 4X90°(0~360°) with +/-0.1 repeatability Zero button to calibrate the gauge to any reference surface Three powerful built-in magnets on the base of the main unit to attach any magnetic surfaces Fast and accurate measurments Light weight portable design Free carrying pouch Measurement Range: 4x90°(0~360°)with ± 0.1 Repeatability Min. Div: 0.1° Accuracy: ≤±0.1° when 0~90° Other angle≤±0.2° The accuracy is based on horizontal position, relative to the ground level position Working current: < 100 μA Operation temperature: 0 - 50°C Operation humidity: 0 - 85%RH Power required: 2 x AAA Alkaline battery(not included) Battery life About 3000 hours in continuous use Size: 151 x 60 x 32mm (5.94" x 2.36" x 1.26" inches) Weight: 293g Quantity:1 Pc The use of the specific please see operation manual Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item.. Thank you! Drainage angles and run-off slopes Tool setting on lathes Setting blade angle of circular saws and miter saws Setting work piece angle for milling Grader and tractor work alignment Platform monitoring Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table. Pack: 1 X Bevel box(Inclinometer) 1 X Operation manual 1 X Carrying pouchages: Standard package from factory

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4500-0010

HHIP depth and angle gage features heads made of hardened steel. Protractor graduations: 30 degree, 45 degree and 60 degree . Rule made of hardened and tempered stainless steel. Base dimension: 2-1/2 x 1/8". rule measures 7/32" wide and 041" thick with deeply etched markings 6" non-graduated 3/32" steel rod included for measuring holes too narrow to use a rule.

Manufacturer: MEDA - SUPERIOR IMPORT Brand: Meda - Superior Import

Made of hardened steel and precision ground. Matched and numbered in pairs. Blocks can be used on sides since clamps do not protrude.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-455-035-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-440-777-0

The Fowler 52-440-777 Universal Dial Protractor, made of hardened stainless steel with a 
satin chrome finish, comes with 6" and 12" blades, an acute angle attachment, and fitted wooden case. The dial has a cutout window for degrees, with two colors and clock-style hand to facilitate reading, and has 12 divisions for each degree to measure intervals of 5 minutes. Blades are beveled 45° on one end and 60° on the other for fitting in tight spaces. The protractor has a positive locking lever. Applications include measuring angles in machines, metal molds, and jigs. Protractors are tools that measure specific angles, which allow users to create and replicate desired angles. The tools include a stationary base and movable rule, usually connected by a scale that may be digital or manual. They are useful in a wide range of applications, such as measuring crown molding and installing baseboards. A protractor can be included as part of a combination set, along with a center and a square. A center accurately locates the center of a circle or cylindrical rod. A square is used to scribe right angles and parallel lines, calibrate miter and table saws, or as a miter, height gauge, or depth gauge. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fowler Brand: Fowler

Features Eliminate constant tables for calculation. Select a riser to obtain the desired angle and you are finished! Sine Bar 5" hardened and precision ground. 1" body size, top parallel to bottom within .0002". Risers 18 risers of the following angles: 1/2 , 1 thru 15 in 1 increments, 1/4 and 1/2 to measure taper per foot. Exact constant within .001".

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-455-050-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 53-422-063-0

The Fowler 53-422-063 Precision Shaft Level is a 200 mm (7-7/8") long spirit level that has one level and one cross-test vial for determining horizontal plane simultaneously in two directions with a sensitivity of 0.1mm/m (0.001"/10") or 20 seconds. The vials are made of glass to resist scratching and provide clear readings, and the main vial can be viewed from the side and the top. A V-shaped groove in the base provides reliable seating when leveling round items such as pipes, conduit, and shafts. The level has a cast iron frame for durability. It measures 200 x 30 x 35 mm/7-7⁄8 x 1-3⁄16 x 1-3⁄8 inches (L x H x D, where L is length, the horizontal distance from left to right; H is height, the vertical distance from the lowest to highest point; D is depth, the horizontal distance from front to back). It includes a wooden case for storage. Levels are used in the building trades, engineering, surveying, and metalworking, among other applications. Levels are instruments that are used to determine the true horizontal or vertical plane of a surface. The most common type of level is the spirit level, or bubble level. Spirit levels have a liquid-filled, bowed tube (also called a vial) with a bubble that moves when slight adjustments are made to the level. When the bubble settles between marked points on the vial, it indicates that a surface is horizontally or vertically straight. Levels can have one or more vials to determine the horizontal plane, the vertical plane, or various points between, such as a 45-degree angle, simultaneously. Some levels include a laser line indicator that projects a horizontal or vertical beam on a surface. Bullseye levels, or surface levels, are circular, flat-bottomed spirit levels that determine whether a surface plane is level. Machinists’ levels are made of metal and have surfaces designed specifically for rugged use in a machine shop or tool room. Levels can range from highly-complex and accurate machines, such as those used in the surveying and construction ind...

Manufacturer: Johnson Level & Tool Brand: Johnson Level & Tool Model: 1913-1000

10" Professional Aluminum T-Bevel Made from Rust free aluminum for a long trouble free life and added durability.