Angle Gauges - Page 11

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-455-010-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-432-469-0

The Fowler 52-432-469-0 Machinist Hardened Steel Square 4 Piece Set is designed for schools, apprenticeships and training programs. The squareness of the blade edge to the working face of the stock is ± 0.0008" for 4" and 6" models, and ± 0.001" for 9" and 12" models. The length of hardened blade is measured from inner edge of beam to end of blades. Made of high carbon steel, these squares have true right angles both inside and outside. Beams and blades ground and lapped for straightness and parallelism. Beam grooved at inner corners for clearance of burrs and dirt. This product has a 1 year warranty offered by Fowler Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

Manufacturer: Techtongda Brand: Techtongda magnetic chuck

Instructions： Put the workpiece on the suction table, and then insert the wrench into the shaft hole to turn clockwise180°, the workpiece can be sucked for processing. The workpiece is completed, the wrench can be inserted into the shaft hole to turn counterclockwise 180 °, you can remove the workpiece Maintenance： Sucker should be wiped clean before use to avoid scratching the surface, after using, the surface should be coated with oil to prevent corrosion. Use of ambient temperature: -40 ℃ -50 ℃. Do not knock, to prevent magnetic reduction. Strong dense pole permanent magnet sucker is for surface grinder, sparks machine, WEDM. Very fine spacing, uniform magnetic distribution, particularly for processing small thin parts. Worktable precision no change while magnetizing and demagnetizing. Panel with special treatment, no leakage, to prevent corrosion of cutting fluid. To prolong service life of the disk, it can be placed on the cutting fluid for storage.Six-surface fine grinding processing, the sucker can be used in  vertical direction on the wire cutting machine cutting. High-performance magnetic steel disk, with suction, almost no remanence. Suction can be 120N / cm2. Application: The magnetic chuckcan be used for processing various magnetic conduction work pieces. For surface grinder, tool grinder, EDM and other applications. Thin & light weight work piece are ideally suitable because of fine-pitched magnetic poles Item number: 170424 1 x Hex wrench 4 x Mounting tabs 1 x Magnetic chuck

Manufacturer: TTC Brand: TTC

TTC 2-Axis Digital Display Unit

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-441-006-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: MeterTo Brand: FRU

This gloss meter is manufactured with international standard ISO 2813. Technical parameters are in accordance with ASTM D2457, ASTM D523 and GB/T13891, GB/T7706, GB/T8807 standard. All performance indexes meet national standard JJG696-2002 "mirror gloss meter and gloss board". Apply on paint, ink, stoving varnish, coating, wood products; Marble, granite, vitrified polished tile, pottery brick and porcelain; Plastic, paper and metal,etc. It is single angle 60 degree with range 0-200Gu, made of metal, very durable. 　 　 　 　 Model WG60 　 　 　 　 Measurement Range 0-200Gu 　 　 Application Apply on paint, ink, stoving varnish, coating, wood products; Marble, granite, vitrified polished tile, pottery brick and porcelain; Plastic, printing, paper; Other metallic material. Instrument Dimensions 122x34x60mm Projection Angle 60° 　 　 　 　 Measuring Spot （ellipse: long axis*minor axis）8mm*4mm 　 　 Measuring Mode Automatic measurement/ manual measurement/single measurement/average measurement and cross measurement for a variety of combination measuring mode Standard Sample Setting Manually setting/bring out stored data for setting/manually setting tolerance Data Storage 100 groups 　 　 set standard sample in any stored data, user-define the tolerance range Language Chinese/English 　 　 Output connect the micro printer to realize real-time output of measured data Division Value 0.1Gu 　 　 　　 Repeatability 0.2Gu 　 　 　 Reproducibility 0.4Gu 　 　 　 Indication Error 1.0Gu 　 　 　 International Standard 60° ISO－2813、ASTM－C584、ASTM－D523、DIN－67530、ASTM－D2457、JND-A60、JND-P60 National Standard 60° GB 9754、GB 9966、GB 8807 　 Standard Accessories Power adapter/user manual/warranty certification/standard board Optional Accesso...

Manufacturer: TTC Brand: TTC

No. of Axis 3-Axis Travel|Decimal Inch 12" x 16" x 6"

Manufacturer: Gages Brand: Gages

Angles 1, 2, 3, 4 are primary angles. 5, 6 are complimentary angles. 7, 8 are half primary. 18 separate gages for easy use. Eight gaging surfaces per gage. Each gage checks primary, 1/2 primary and complimentary angles. Quick and accurate inspection of angles and I.D. or Outside Diameter chamfers, in or out of a machine. Use to position lathe tools for chamfers. Use to inspect angles on ground form tools and cutters. 5 Degree through 90 Degree primary angles, 95 Degree through 175 Degree complementary angles.

Manufacturer: Ben Meadows Brand: Ben Meadows

Style C Stream Gauge Works Well in Fresh or Saltwater Highly durable Ben Meadows Style C Stream Gauge features an iron frame coated with baked enamel to resist corrosion and discoloration. This stream and river gauge can even be used in saltwater. Each section provides accurate graduations and grommeted holes for fastening with a number 8 x 3/4" round head, brass-wood screw. Measures 2-1/2"W, graduated to hundredths and marked every foot and every tenth. Stream Gauge is 3-1/3'. Numbered 0-3.33'.

Manufacturer: iGaging Brand: iGaging

Machine shop accuracy of the iGaging Angle Cube is perfect for set up of table saw blade angles, table angles on drill presses and bandsaws, grinder tool rests and jointer fences. To use set the cube on the work surface and hit the Zero button to set Relative Zero. Then attach the cube to the blade or fence - super strong magnets on both the sides and bottom hold it tight - and make setting your machine easier. The extra-large LCD display reads continuously so you can hit your mark dead on - no guesswork. The display screen is reversable (automatically flips upside down) when necessary to keep it as readable as possible in every situation. Hold Function saves the last measurement when needed. US made navigational sensor inside measures Absolute Level, so it also makes a handy pocket level for hanging up pictures, or squaring up machines, tables, or cabinets. Comes with a 9V battery with 250 hours of use. Compact (2-1/8" x 2-1/8" x 1-1/8") CNC machined metal body. Low battery indicator. Designed and engineered by iGaging, a division on International Precision Instruments Corporation (IPIC), and then manufactured to strict US tolerance overseas.