Pin Gauges - Page 23

Manufacturer: Forster Products Brand: Forster Products

The Field gauge is used to measure the absolute maximum allowable chamber headspace. The Field gauge is used for a rifle in service that has already passed a GO and NOGO test when built. If the bolt closes on the Field Gauge it is considered unsafe headspace and should be taken out of service for repair. Excessive headspace will cause more case stretch leading to case failures and a blow-up. For use in all .223 chambers as well as any 5.56 chamber that is expected to fire any .223 ammo. This is because .223 ammo is loaded with softer brass or steel cases that cannot handle the case stretch of the longer 5.56 max headspace. Never fire .223 reloads in a .223 or 5.56 chamber that exceeds .223 headspace specs. The Field gauge is also good to use every 500 to 1000 rounds to detect any headspace problems due to unusual accelerated wear on the bolt or locking lugs due to improper heat treat of the parts. This gauge ships only in the USA, No export or APO/FPO.

Manufacturer: Westward Brand: Westward

Pin Gage Handle, Hex, Aluminum Alloy, Length (In.) 3

Manufacturer: Forster Brand: Forster Products Model: HG3006G

The GO gauge is used to measure the minimum allowable, safe chamber headspace. If the bolt does not close on a GO gauge, it is considered unsafe. Must have for rechamber jobs to set the new headspace or to verify the correct headspace of a new barrel and bolt combination. Failing the GO gauge indicates the headspace is too tight, which increases chamber pressure and failure to go all the way in battery. This leads to pierced and popped primers that will damage the firing pin tip and cause slam fires. It also can cause hard extraction and damage to case heads. The GO gauge should be used to test any new barrel and bolt combination or when swapping in a new or used bolt. This gauge ships only in the USA, No export or APO/FPO.

Manufacturer: ABS Import Tools Brand: HHIP

MADE IN USA | For measuring wire diameter and non-ferrous sheets such as copper, brass, aluminum, etc. | Measures gauge no. from 36 to 0 (.003 ~.3125 ). | Made of hardened steel and satin chrome finish. | Marks of wire size on front, decimal equivalents o

Manufacturer: HHIP Brand: HHIP

SPI style. ~ Superior finish and smooth operation. ~ Holds pin gage with greatest gripping power. ~ Can be used with GO pin (green) and NO GO pin (red). ~ Comfortable and ergonomically designed handle for pin gages. ~ No bushings required. ~ Minumum measuring range is 0.626". ~ Maximum measuring range is 0.75".

Manufacturer: MILTON INDUSTRIES INC Brand: Milton Industries

Gage 1/4Npt 0-300 Psi-2pack.

Manufacturer: TTC Brand: TTC

Use gage to check locations, gage slots, hole sizes and depths and distance between holes.

Manufacturer: HHIP Brand: HHIP Model: 4101-1010

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Accuracy - 0.005mm + 0.000mm.

Manufacturer: HHIP Brand: Pro Series HHIP Model: 4101-0040

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Supplied with a handle.

Manufacturer: Delmhorst Brand: Delmhorst Model: 608/001/4

The 608 insulated contact pins measure 7" overall, and penetrate 6". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS.