Pin Gauges - Page 24

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P1(+)

Manufacturer: HFS Brand: HFS

Product features Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C) All gage block sets are certified by an accredited ISO-17025 Gage lab with long form certification Individual serial numbers on each block, regardless of grade A complete certificate of calibration traceable to the N.I.S.T. showing the deviation of each block. All sets meet or exceed Fed. Spec. ASME B89.1.9-2002 Grade : Economy Sets calibrated to meet or exceed federal specification GGG-G-15C, Grade : B Surface finish 4.1 millions. All calibration conforms to:MIL-STD 45662A, GGG-G-15C, ISO/IEC 17025 Accredited, ISO 9000, 10012-1, ANSI-NCSL Z540-1, ISO GUIDE 25 Certified Mirror polished surfaces provide superior wringing characteristics Guaranteed Accuracy of Flatness, and Parallelism Excellent Finish and Wringing Characteristics The interior separator is made out of plastic, therefore it will guarantee the gage blocks won't get wet or rusty All sets are supplied in deluxe fitted wood case The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade B gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage 101200200 .0110-.0600 CLASS ZZ MINUS SET

Manufacturer: HHIP Brand: HHIP Model: 4101-0014

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Set is -0.0002" + 0.0000".

Manufacturer: ezMachineTools Brand: ezMachineTools

This M4 Minus type plug pin gage set contains 125 pieces. They are of size 0.626 inch to 0.750 inch. The tolerance is -0.002 inch.

Manufacturer: Reid Supply Company Brand: RSC

Z Class Steel Plug Gage Sets - Quality Z class gage sets for measuring hole sizes and depths, to check locations and distances between holes, to set micrometers and go and no-go gaging. All gages are 2 long with the size etched on each piece (except M0 Set). All English gages are inspected within .0001 tolerance limit with centerless finish of 10 micro or better. No sharp edges. Made from 52100 bearing steel and heat treated to Rockwell C60 to C62. Comes in wooden case. Available in plus or minus tolerance.

Manufacturer: Vermont Gage Brand: Vermont Gage

Economical General Purpose Pin Gages Make quick and accurate measurements with Vermont Gage pin gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/No-Go gaging. Size in micrometers and snap gages. These economical gages are a must for anyone making frequent and varied measurements. * Class ZZ (.0002" or .005mm tolerance) * Go (Plus) or NoGo ( Minus) * NIST traceable * .0005", or .02mm sizes * .001" or .02mm set increments * 52100 tool steel; 60/62 Rc * 2" long * 10 microinch finish or better * Within .0001" round * Marked with size & direction of tolerance on gages over .060" * Certificate of Accuracy included

Manufacturer: L.S. Starrett Brand: Starrett

Technical Specification Item Pin Gage Plus Set Shape Round Material Steel Measuring Range (In.) 0.751 to 0.832 Increments (In.) 0.001 Tolerance 0.0002 Length (In.) 2 Application Used to Determine Small Hole Sizes/Gage Slots/Find Hole Distances Includes Case Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: HHIP Brand: HHIP Model: 4103-0016

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".