Reference Gauges - Page 110

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: HHIP Brand: HHIP Model: 4103-0237

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0089

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0072

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0161

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0158

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: Wilmar Brand: Wilmar Model: W80525

Performance Tool 17 Blade Mini Thickness Gauge part number W80525, 17 1 1/2" by 1/4" straight blades.Sizes: .010" .012" .013" .015" .016" .017" .018" .019" .020" .022" .024" .025" .026" .028" .030" .032" .035".

Manufacturer: Amico Brand: Amico

32 stainless steel foldable leaves.Each leaves stamped with size. High precision.Be protected with a yellow plastic casing.It has large turned and knurled thumb screws to lock the desired leaf in place.Used for checking internal and external radius on each leaf or convex and concave surfaces.

Manufacturer: 1 Brand: ElectronicLink

Radius gauges require a bright light behind the object to be measured. The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction;It is a kind of observational measurement because of its visual test way;R1-6.5mm includes 16pcs at each end, radius as 1mm, 1.25mm, 1.5mm, 1.75mm, 2mm, 2.25mm, 2.5mm, 2.75mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm.

Manufacturer: HeroNeo Brand: HeroNeo®

100% brand new and high quality Foot body using 65 # Mn Polished surface Metric and inch comparison Foot body 3.5 " Compliance with DIN2275 and JIS B 7524-1992 product standards 　 Type: gap film Measuring range: 0.02-1 .00 mm Accuracy: +0.005 /-0.003mm Piece Length: 75mm Total length: 170mm Quantity: 1 pc Foot piece Specifications: 0.02mm, 0.03mm, 0.04mm, 0.05mm, 0.06mm 0.07mm, 0.08mm, 0.09mm, 0.10mm, 0.13mm, 0.15mm 0.18mm, 0.20mm, 0.23mm, 0.25mm, 0.28mm, 0.30mm 0.33mm, 0.38mm, 0.40mm, 0.45mm, 0.50mm, 0.55mm, 0.60mm, 0.63mm, 0.65mm, 0.70mm, 0.75mm, 0.80mm, 0.85mm, 0.90mm, 1.00mm Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your understanding. Package includes: 1 x 32 set feeler gauge blade