Reference Gauges - Page 233

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: INSIZE Brand: INSIZE Model: 6801-1201

Magnetic v-block, 3.1x2.8x3.7".

Manufacturer: Slope Meter, Inc. Brand: Slope Meter, Inc.

Calibrated in percentage of grade from 0 to 50%. A major use for this meter is in all areas where a steeper slope reading is needed. This product works well on bulldozers and similar equipment.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go and no-go gage set is a class X inch plug gage set for inspecting pitch diameter and functional threads of internally threaded parts. This tool is made from Rockwell c scale (Rc) cold stabilized steel for durability. It has a 2” handle with a threaded go plug on one end and a threaded no go plug on the other. A certificate of accuracy traceable to National Institute of Standards and Technology (NIST) is available for each gage, and each handle is marked with nominal size, threads per inch, class of fit, and pitch diameter. This gage set meets American National Standards Institute (ANSI) B1.2 standard for unified screw threads and is available in a range of sizes and thread fits for different applications. Vermont inch gages have light blue handles to help avoid confusion with metric gages (that have yellow handles) during inspection. This inch gage set is available in a range of sizes followed by an abbreviation that indicates the type of thread to be inspected, including NPSM (National Pipe Straight Mechanical), UN (Unified), UNC (Unified Coarse), UNF (Unified Fine), or UNEF (Unified Extra Fine). This go and no go gage set can be ordered with a class fit of 2A (looser tolerance) or 3A (for a tighter tolerance). Go and no-go plug gages are used to inspect the pitch diameter and functional thread for internally threaded parts to determine if they pass or fail tolerances (allowed deviation from the stated size). Go gages inspect form, lead, and pitch to ensure that the part being inspected is smaller than the maximum permitted pitch diameter and functional size, if the gage screws into the go plug gage it “passes”. No-go gages inspect pitch diameter and determine if a part is larger than the minimum size requirement by its inability or “failure” to screw into the threaded part (the part’s thread is too small). Go and no-go plug gages are used in conjunction to inspect the size and tolerance of threaded parts. They are available in different classes, bas...

Manufacturer: Doc.Royal Brand: Doc.Royal

Feature： LCD panel and access-friendly button , Lightweight, ergonomic design Smart Auto Reverse & Alarm Function , When rotary file reaches preset torque, the file will automatically withdraw until removal of resistance, Safer treatment. Save 6 programs working style , Three rotation modes:Auto-reverse,Auto-stop,Auto-shutdown. High capacity battery, Long life. Contra angle, file clip and lip hook can be 135℃ autoclaved. Main Specifications Battery Voltage DC 3.7V Battery capacity 1500mAh Charging time 4 hours approx. Rated input voltage AC100-240V 50/60Hz Output voltage DC 5V Output current 1A Environment temperature +5℃~+40℃ Relative humidity 10%~80%RH Atmospheric pressure 50~106KPa

Manufacturer: HHIP Brand: HHIP Model: 4103-0055

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0035

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0120

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: uxcell Brand: uxcell Model: a15061100ux0142

Mainly used for measuring the size of the hole, the distance of the hole and the depth of the hole, and widely used in electronic board, PCB, dies, manufacturing.