Reference Gauges - Page 282

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-440-612-0

The Fowler 52-440-612 Bevel Protractor comes with 6" and 12" blades and has a magnifier lens for easy reading of vernier scale and dial. The dial is graduated over 360° in 0 to 90° sectors, rotates around the full circle, and provides readings to 5 minutes of arc on the vernier scale. The blade has beveled ends (one 45° and one 60°) for fitting in tight spaces, slides the full length, and is fastened by a knurled thumb lock. The fine adjustment knob enables precise measuring. The base, blades, and angle attachment are made of hardened stainless steel. The protractor has a satin chrome finish for reading ease and comes with a fitted case and with an angle attachment for measuring acute angles. Protractors are tools that measure specific angles, which allow users to create and replicate desired angles. The tools include a stationary base and movable rule, usually connected by a scale that may be digital or manual. They are useful in a wide range of applications, such as measuring crown molding and installing baseboards. A protractor can be included as part of a combination set, along with a center and a square. A center accurately locates the center of a circle or cylindrical rod. A square is used to scribe right angles and parallel lines, calibrate miter and table saws, or as a miter, height gauge, or depth gauge. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-470-200-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Pin Gages Brand: Pin Gages

Each gage is marked with size and tolerance ( + or -). Photo shows one of our pin gage sets, but not necessarily this specific set.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-747-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Amico Brand: Amico

Radius gauges require a bright light behind the object to be measured. The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction.It is a kind of observational measurement because of its visual test way.

Manufacturer: Amico Brand: Amico

Radius gauges require a bright light behind the object to be measured. The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction.It is a kind of observational measurement because of its visual test way.

Manufacturer: uxcell Brand: uxcell Model: a12080300ux0440

Each leaves stamped with size. High precision.Be protected with a gray metal casing.It has large turned and knurled thumb screws to lock the desired leaf in place.Used to test the two surface combining the size of the gap.

Manufacturer: Reid Supply Company Brand: Precision Brand

Used for close spacing and extremely tight tolerance situations. Steel shims are made from close grain C1095 high carbon steel, hardened and tempered to Rc 48-62. Stainless steel shims are made from 1/2 wide, 300 series stainless steel, hardened and tempered to Rc 45-55. Flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 and can be easily cut to length.

Manufacturer: Precision Brand Brand: Precision Brand Model: PBFPK19821

Precision Brand Feeler Gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.

Manufacturer: General Tools Brand: General Tools Model: 255MM

General Tools Screw Pitch Gages are finely crafted measuring devices used for gaging V, American National or U.S. standard 60 degree threads. Gage is notched for measuring inside threads of small holes and nuts as well as external threads. Knurled thumb nuts lock the case in an open or closed position for mess free storage. 22 screw pitches combines sizes 0.35 to 6.0 mm.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction guaranteed. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS