Reference Gauges - Page 38

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 950-201

Mitutoyo Center Gage, Use for: 60 Deg. Threads, Embossed scales: 14ths, 20ths, 24ths, and 32nds.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class X inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage. All gages measure 2” long, and are within .00002” round (per ASME B89.1.5), with at least a 4-microinch finish for a smooth finish. Tolerance for this class X gage is -.000040” for sizes up to .825” and -.000060” from .8251” to 1.000”. This gage is made of tool steel 60/64 Rc (cold stabilized) for durability. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Vermont Gage Brand: Vermont Gage Model: 911276900

Cl ZZ (.0002" or .005mm tolerance),go (Plus) or no go (minus),available in blackguard or steel, NIST traceable, tool steel 60/65Rc, 2" long pins, certificate of accuracy included .

Manufacturer: Merlintools Brand: Merlintools

Brand new M6 x 1.0mm 6H plug thread gauge.

Manufacturer: Toolconnection Brand: Tool connection

This feeler gauge has 32 blades in AF and MM sizes. The brass gauge is used on the reluctor air gap on electronic ignition systems where non-ferrous blades are required. Sizes: Imperial: 0.0015-0.0353 | Metric: 0.038-0.0889 | Brass: 0.010-0.254

Manufacturer: VERMONT GAGE Brand: Vermont Gage

Use to calibrate measuring equipment. Use to pass/fail manufactured parts. Perfect for high volume inspection. Use these single tolerance, class X plug gages as reference standards (master gages) to calibrate comparators, micrometers, snap gages and other measuring equipment. Use to gage parts directly. Use these gages as direct measurement standards in inspecting manufactured parts. Faster set-up times - eliminate the need of wringing blocks together and calibrate by using the exact diameter you need. More accurate - use a master gage which is the same diameter as the work being measured and you eliminate lead error in your measuring equipment. Lapped to 2 microinch finish or better. Eliminate geometry error which is caused when calibrating with flat gage blocks.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4102-0004

HHIP pin gage handles is comfortable and ergonomically made handle for pin gages. Made from aluminum and powder coated. Can be used with go pin (green) on one end, no go pin (red) on opposite end. Product specifications: for pin gage: 501 - 625 inch

Manufacturer: INSIZE Brand: INSIZE Model: 4608-31

Feeler gage, 0015"~ 035".

Manufacturer: INSIZE Brand: INSIZE Model: 4112-CD112

Individual steel gage block, 112 inch grade as-2.

Manufacturer: INSIZE Brand: INSIZE Model: 4112-CD142

Individual steel gage block, 142 inch grade as-2.