Reference Gauges - Page 73

Manufacturer: MeterTo Brand: FRU

WG60T has a very good performance to measure extremly low gloss, like less than 5 Gu. WG60T is produced according to the national verification regulation of JJG696 standard, adopt long life light source, good repeatability, small volume, high precision and good stability. It is mainly used on coatings, printing ink, paint, paint, wood, marble,granite, polishing brick, brick of pottery and porcelain, plastic, paper, metal and non-metallic materials. more stable performance, more durable, more comfortable; Specification: Single Angle Gloss Meter Measuring Angle: 60° Measuring Range: 0-1000Gu Measuring Spot: 9x15mm Division Value: 0-200: 0.1Gu Repeatability: 0-100:0.2Gu >100:0.2% Indication Error: ±1.5Gu Zero Error: 0.2Gu Working Temperature: 10℃ - 40℃ Storage Temperature: -10℃ - 70℃ Humidity Range: Relative humidity less than 85%, without condensation Power Adapter:: Section 2 5 alkaline batteries/power adapter Volume: 159x49x72mm Weight: 500g　 Attachment Description (1) Power adapter: standard + 5V, 2A external power supply; (2) Standard board: provide calibration criterion. Warranty 1 year.

Manufacturer: Junyushiye Brand: Film and Coating Thickness Gauge SK220

*Measuring mode: Single, Continually and Difference *Data store/ Data recall/ Data delete function *Data Analysis: Average, Maximum, Minimum, Standard deviation and measuring times *Beep sound indication *Measure in Metric/Imperial *LCD backlight display *ow battery indication *Auto power off *Warranty: 12months

Manufacturer: Junyushiye Brand: Junyushiye

*Measuring mode: Single, Continually and Difference *Data store/ Data recall/ Data delete function *Data Analysis: Average, Maximum, Minimum, Standard deviation and measuring times Zero point/two points/basic calibration. *Beep sound indication *Measure in Metric/Imperial *LCD backlight display *Low battery indication *Auto power off *Warranty: 12months

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: HHIP Brand: HHIP Model: 4103-0156

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0126

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0196

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: Reid Supply Company Brand: Precision Brand

Used for close spacing and extremely tight tolerance situations. Steel shims are made from close grain C1095 high carbon steel, hardened and tempered to Rc 48-62. Stainless steel shims are made from 1/2 wide, 300 series stainless steel, hardened and tempered to Rc 45-55. Flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 and can be easily cut to length.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: yqltd Brand: CNBTR

Specification: Material:Stainless Steel Color:Silver Standard:R1~6.5mm Blade Number:13 Blades x 2 Size(Folding):70 x 14 x 10mm/2.76 x 0.55 x 0.39""(L x W x T) Weight:56g Feature: Radius gauge for checking curve radius of the workpiece surface irregularities, also can be used as limit gauges use, it is commonly used tools. Metric set, very usefull gauge for Tool & Die makers, machinists, screw machine operators, pattern makers, layout men and other mechanics to lay out and check the radii of tools, dies, patterns etc. All gauges have locking device .Each leaf is marked Leaves are specially shaped so the can measure fillets and radii in corners or against shoulders Made of Stainless Steel.high quality Radius Gauge Package Include: 1 x Radius Gauge