Rulers - Page 2

Manufacturer: PEC Brand: PEC Tools

Manufacturer: Oregon Rule Co. Brand: Oregon Rule Co. Model: SHR/FM-W1.5X80VU-TC Color: White

Oregon Rule Co. Security Height Rules are bold, clear scales for quickly referencing height. Often these types of rules can be seen around the doorframes of businesses as you exit. Security Height Rules are commonly seen in banks, police stations, restaurants, schools, and doctor's offices. With its high-tack adhesive, these rules can be applied to nearly any clean surface. This Security Height Rule is 1 1/2 inches wide and its length extends past the most common range of adult heights (6 Foot 8 Inch). To set up, simply start applying the rule at the base of the floor. In the case of obstruction, like floorboards or moldings, simply measure the obstacle's height and remove that length from the ruler with scissors. This rule is adhesive backed and comes on a peel-away liner. Rule reads 0 to 80 Inch on left side, 1/8 Inch graduations, both in continuous inches and inches-and-feet styles Rule reads 0 to 203 Centimeters on right side, 1/2 Centimeter graduations Dimensions are 1 1/2 Inch wide X 81 Inch long Bold black and red graphics on a white background Similar Products (Search Amazon by ASIN) ASIN: B00HVG9PDO - Security Height Rule - Fractional - 3 Foot 8 Inch to 6 Foot 8 Inch - White ASIN: B00HVGVX02 - Security Height Backdrop - Fractional - 3 Foot to 7 Foot - White - Wall Mount Banner ASIN: B00HVH90YC - Kids Height Rule - Fractional - 80 Inch

Manufacturer: Taylor Toolworks Brand: HRSAE

Made from hardened spring steel. Rigid blade is .040" thick and 1" wide. Both sides of the blade are ground parallel and straight. Rule is precision photo etched and black filled for long life and easy readability. Graduated with 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other side. Hooks can be used on either side of the rule and ensure that the rule is accurately aligned with the edge of your work. Hook can be adjusted to either side of the blade by loosening the set screw.

Manufacturer: Stabila Brand: Stabila Model: 80015 Color: white

Stabila 80015 Specifications: Type: 600 Measurement: Engineers (1/16ths, 1/10th, 1/100ths) Stabila 80015 Includes: (1) Engineers Folding RulerStabila 80015 Features: Premium beech wood segments Weather/abrasion resistant Fully sealed rivets Hardened steel springs Fiberglass reinforced Certification of accuracy

Manufacturer: GreatLite Brand: Mayes Model: 10208

The Mayes 36 inch Straight Edge Aluminum Ruler is perfect for making measurements up to 3 feet and features an over-sized 2 inch width. It is crafted from sturdy and lightweight .125 inch extruded aluminum with a non-glare satin finish. This ruler has thermo-bonded embossed graduations in 1/8 and 1/16 inch for easy measuring. Its straight edge is ideal for marking and drawing straight lines.

Manufacturer: uxcell Brand: uxcell Model: a14050200ux0493

Metric unit 0-15cm on one sides and Imperial unit 0-6 inch on the other sides.Accuracy to 0.1, 0.5mm, other side accuracy is 1/10, 1/16, 1/20, 1/32, 1/50, 1/64  ect.With hole for easily hanging with hook or string.Stainless steel material can be use for long time, good tool to measure .

Manufacturer: Shinwa Measuring Tools Corporation Brand: Shinwa

This is a Hardened Stainless Steel Satin Chrome Rigid 6" Steel 4R rule. This rule is made in Japan by Shinwa Measuring Tools Corporation, a premier tool manufacturer and is one of the most commonly used rules in Japan. This rule is made from the finest stainless steel available and is hardened and tempered. It has a zero glare satin chrome finish which makes it easy to read and will prevent corrosion. Markings are precision photo etched and then black filled for easy readability. The 4R graduations shows 32nds and 64ths on one side and 8ths and 16ths on the reverse. Rule is .750" wide and .035" thick. Both long edges and ends are ground flat and straight. Accuracy conforms to Japanese Industrial Standard (JIS) B 7516 Grade 1.

Manufacturer: Shinwa Measuring Tools Corporation Brand: Shinwa

This is a Hardened Stainless Steel Satin Chrome Rigid 6" Steel 3R rule. This rule is made in Japan by Shinwa Measuring Tools Corporation, a premier tool manufacturer and is one of the most commonly used rules in Japan. This rule is made from the finest stainless steel available and is hardened and tempered. It has a zero glare satin chrome finish which makes it easy to read and will prevent corrosion. Markings are precision photo etched and then black filled for easy readability. The 3R graduations shows 32nds and 64ths on one side and 10ths and 50ths on the reverse. Rule is .750" wide and .035" thick. Both long edges and ends are ground flat and straight. Accuracy conforms to Japanese Industrial Standard (JIS) B 7516 Grade 1.

Manufacturer: Products Engineering Corporation PEC Tools Brand: Products Engineering Corporation PEC Tools

This precision machinist rule is made in the USA by Products Engineering Company (PEC Tools), a premier US tool manufacturer. It has a satin chrome finish for scratch resistance and rust resistance. It is made from the finest stainless steel available and is hardened and tempered. Graduations are precision photo etched and then black filled for easy readability. 4R graduations show 8ths and 16ths on one side and 32nds and 64ths on the reverse Rule is .750 inches wide and .035 inches thick. Both long edges are ground flat and straight. This is a premier US made ruler.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-323-616

This Brown & Sharpe 599-323 Series steel rule has inch graduations and a chrome finish for measuring in woodworking, carpentry, and machining applications. The graduations vary by model and include numbered 10ths and 50ths (3R), numbered 10ths and 100ths (5R), or 8ths and 16ths (4R) on one side and 32nds and 64ths on the reverse. The spring-tempered stainless steel body construction is fully flexible for durability and flexibility. The chrome finish helps reduce glare and is rust-resistant.Rules are devices used to measure distances, or to rule straight lines. Rules have markings at specified intervals (also called graduations), as opposed to straight edges, which lack graduations and are used solely to draw a straight line. Nearly all rules are straight edges, except for rounded rules used to measure circles and arcs of angles in geometry applications. Rules can vary from high-quality steel instruments used by machinists; to retractable rules (also called tape measures) used in carpentry and for home-use; to simple wooden or plastic rules used in primary and secondary schools.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.