Rulers - Page 9

Manufacturer: Shinwa Japanese Measuring Tools

This precision 600 mm metric rigid ruler is made by Shinwa Measuring Corporation, a premier tool manufacturer. Rule is made from spring tempered and hardened stainless steel and is 1.180" wide by .052" thick. It has a "zero-glare" satin chrome finish on the face that can be easily read in both low and bright light conditions. One face has metric graduations in both .5mm and mm and the reverse side has metric conversion tables and tap drill sizes. Graduations are precision photo etched and then black filled for easy readability. 100 mm divisions are marked in red. The sides of each rule are precision ground parallel to each other. One end is accurately ground square to allow accurate reading, while the other end is rounded with a hole for hanging.

Manufacturer: STARRETT Brand: Starrett

Picture may represent similar item C604R-6 6" QR RULE 52678

Manufacturer: PEC Tools Products Engineering Company

This precision 6" 16R rigid hook rule is made in the USA by Products Engineering Company (PEC Tools), a premier tool manufacturer. Rule is made from spring tempered and hardened steel and is .750" wide by .042" thick. It has a "zero-glare" satin chrome finish that provides better rust resistance than polished steel and can be easily read in both low and bright light conditions. The sides of each rule are ground parallel and each end is accurately ground square to allow reading from either end. 16R graduations have 1/50" and 1/100" on one side and quick-reading 1/32" and 1/64" on the other. Graduations are precision photo etched and then black filled for easy readability.

Manufacturer: Starrett Brand: Starrett Model: 56262

Starrett 6" x 1/2" x 0.04" (150mm x 12.7 mm) flexible ruler. Flush start on both sides. Spring tempered steel with satin chrome finish.

Manufacturer: Starrett Brand: Starrett Model: C635-150

' Steel Rule, Flexible, Construction Hardened And Tempered Tool Steel, Graduation Type 35, Graduations mm, 1/2mm, mm, 1/2, Length 150 mm, Width 19 mm, Satin Chrome Finish, Markings C635-150 '

Manufacturer: Starrett Brand: Starrett Model: C636EM-6

This Starrett spring-tempered stainless steel rule has photo-engraved graduations in inches and millimeters and a satin-chrome finish for measuring in woodworking, carpentry, and machining applications. Its graduations are in 32nds of an inch and half millimeters on one side and 64ths of an inch and millimeters on the opposite side. They are photo engraved for accuracy and staggered in a height pattern for readability. The spring-tempered stainless steel body construction is fully flexible for durability and flexibility. The satin chrome finish aids readability and provides rust resistance.Rules are devices used to measure distances, or to rule straight lines. Rules have markings at specified intervals (also called graduations), as opposed to straight edges, which lack graduations and are used solely to draw a straight line. Nearly all rules are straight edges, except for rounded rules used to measure circles and arcs of angles in geometry applications. Rules can vary from high-quality steel instruments used by machinists; to retractable rules (also called tape measures) used in carpentry and for home-use; to simple wooden or plastic rules used in primary and secondary schools.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: C636ME-150

This Starrett spring-tempered stainless steel rule has photo-engraved graduations in inches and millimeters and a satin-chrome finish for measuring in woodworking, carpentry, and machining applications. Its graduations are in 32nds of an inch and half millimeters on one side and 64ths of an inch and millimeters on the opposite side. They are photo engraved for accuracy and staggered in a height pattern for readability. The spring-tempered stainless steel body construction is fully flexible for durability and flexibility. The satin chrome finish aids readability and provides rust resistance.Rules are devices used to measure distances, or to rule straight lines. Rules have markings at specified intervals (also called graduations), as opposed to straight edges, which lack graduations and are used solely to draw a straight line. Nearly all rules are straight edges, except for rounded rules used to measure circles and arcs of angles in geometry applications. Rules can vary from high-quality steel instruments used by machinists; to retractable rules (also called tape measures) used in carpentry and for home-use; to simple wooden or plastic rules used in primary and secondary schools.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Products Engineering Corporation PEC Tools Brand: Products Engineering Corporation PEC Tools

This precision machinist rule is made in the USA by Products Engineering Company (PEC Tools), a premier US tool manufacturer. It is coated with Titanium Nitride for extreme scratch resistance and ultra-high contrast. It is made from the finest steel available and is hardened and tempered. Graduations are precision photo etched and then black filled for easy readability. English / Metric graduations show 5 mm and mm markings on one side and 32nds and 64ths on the reverse. Rule is .75 inches wide and .035 inches thick. Both long edges are ground flat and straight.

Manufacturer: Starrett Brand: Starrett Model: 635N-150

Starrett 635N-150 STEEL RULE- NARROW- SPRING-TEMPERED- 150mm- #35 GRADS

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-314-1205

The Brown & Sharpe stainless steel rule measures workpieces in fractions of an inch. Stainless steel construction is durable and provides sharp graduation marks. Numbered graduations speed reading and reduce counting errors. Rules are devices used to measure distances, or to rule straight lines. Rules have markings at specified intervals (also called graduations), as opposed to straight edges, which lack graduations and are used solely to draw a straight line. Nearly all rules are straight edges, except for rounded rules used to measure circles and arcs of angles in geometry applications. Rules can vary from high-quality steel instruments used by machinists; to retractable rules (also called tape measures) used in carpentry and for home-use; to simple wooden or plastic rules used in primary and secondary schools. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.