Protractors - Page 4

Manufacturer: Generic Brand: Generic

Product Description: This is a 2 in 1 folding rule with a big difference.Measuring both the angle and length at the same time with a clear digital display of the angle and bold markings in both Metric and Imperial on the rules.The rules are made from corrosion resitant stainless steel.The battery life is around 200 hours and is protected by auto shut down after 6 minutes.They have a clever auto-start of the digital read out, this will switch on as soon as you open the rule, saving time and fumbling for a button. Product Details: Measuring Range (Angle): 000.0 ~ 359.9° Resolution: 0.1° Accuracy: 0.3° Working Temperature: 5 °C~ 50 °C (41 ~ 122 °F) Working Humidity: ≤85 % R.H. Working Current: ≤30 µA (More than 5000 hours in continuous use) Power: 1 x CR2032 3V Lithium Battery (Included) Item Size: approx. 278 (L) x103 (W) x 30(D) mm Item Weight: approx. 245 g (8.64 oz)

Manufacturer: Yueqing Meba Electric Co.,Ltd Brand: MEBA Model: MB5415-90

♦Measuring Range :4*90(0~360degree) ♦Resolution : 0.05degree ♦Accuracy : ±0.2degree ♦Working Current ＜100uA

Manufacturer: Mitey Miter Brand: Mitey Miter Model: 73-00044 Color: Stainless Steel

Q: Why was the Mitey Miter Tool developed? A: The Mitey Miter Tool was developed to offer a tool that simplifies miter cuts. By using the Mitey Miter Tool you will save time, money, and reduce wasted material. Q: What does the Mitey Miter Tool do? A: The Mitey Miter Tool measures and divides any angle achieving an accurate fitting miter joint without using math or calculations. Q: What is a Miter Joint? A: A miter joint is the most common joint between two pieces of material that meet at an angle, in which each piece of the butting surface is cut into two equal halves. Q: Who can use the Mitey Miter Tool? A: Homeowners, Re-modelers, Contractors, Deck Builders, Metalworkers, Finish Carpenters, Tile/marble installers, and Framers (anyone who needs to measure and divide an angle). Q: Why should I use the Mitey Miter Tool? A: The purpose of the Mitey Miter Tool is to provide an accurate fitting miter joint. Even if you can figure out an angle without using the Mitey Miter Tool, odds are you will be measuring an object that is not square or level such as a wall, a floor, deck, picture frames, etc. which can cause your calculations to be off resulting in wasted time, and materials. The Mitey Miter Tool is just the tool to take away the frustration and guesswork of finding an accurate fitting miter joint each and every time. Q: How will I measure an angle? How do I divide a miter? What degree will it be? A: Who cares! Just cut on the line created by your Mitey Miter Tool!!! Don't Wait - Click "Add To Cart" Now!

Manufacturer: General Tools Mfg Co In Brand: General Tools Model: 30

General's ULTRA RULE Precision Protractor allows you to plot any angle with ease and absolute accuracy. Micro-fine marking holes are positioned at 45, 30, 22.5, 5 and 0.5 degree intervals, allowing you to place your mark with zero uncertainty. The Precision Protractor also features four angle scales, a removable T-Bar and a rule graduated in 32nds. Made of flexible stainless steel with etched black graduations.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Manufacturer: Yueqing Meba Electric Co.,Ltd Brand: MEBA

●High resolution 0.05° ●Zero-setting at any position ●Measurement range 0-360 degree ●Strong blade lock can hold the readout securely ●Reversible reading allowing to filp the display reading to right side up ●Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 8 inches ●Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool

Manufacturer: FLOUREON Brand: Floureon Color: blue

Description: This inclinometer (angle measuring device) can be used to measure angles within ±180° (0 ~ 360°) range in wide variety of applications. You can simply place the meter on a reference surface zero, then it will give a result of measured angle within 0.3° accuracy. The built-in strong disk magnets on the bottom can firmly attach the meter to the surface you are going to measure, so that you can easily and quickly set the bevel angle. The reading is always displayed as upright. This meter works great for miter and table saws. Features: - Absolute&Relative angle measurement - Magnetic base securely attaches gauge to any metal surface - Large LCD display reads upright at any angle - Degree & slope conversion. - Platform monitoring. Data hold. - Drainage angles and run-off slopes - Grader and tractor work alignment - Setting blade angle of Circular Saws & Miter Saws - Calibrate button. Tool setting on Lathes - Setting work piece angle for milling - Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table - Runs on by 3 pcs CR2032 3V batteries(battery not including for air shipment) - Upright display: The displayed value would be not upside down whatever the unit is upside or not. Specification: - Measuring Range: 4 x 90° - Resolution: 0.1°/ 0.01% - Repeatability: ±0.1° - Operating Temperature: 0 - 40°C - Operating Humidity: 40 - 80% - Power Supply: 3 x 3V CR2032 Batteries - Size: 65 x 52 x 26mm; Weight:128g Package: - 1 x Bevel Box with Spirit Level - 3 x 3V CR2032 Batteries (installed) - 1 x English Instruction Manual

Manufacturer: OFKP® Brand: OFKP®

Description: This item is a precise measuring device which enables quick measuring and transferring of angles. It is an excellent device for industrial applications which involve the definition of the exact angles, e.g. for niches and bays, sloping roofs and handrails. You must have it if you are a building contractor, civil & construction engineer, building project administrator, etc Specifications: * Color: Silver * Length: 400mm / Approx. 16 inch * Material: Stainless Aluminum * Working range of angle measuring: 0 to 225 degrees * increase/decrease angle : 0.1 degree * Auto shut off after five minutes * Angle precision: ±0.1 degree * Operating temperature: -10°C to 50 °C * Storage temperature: -10 to 60 °C * Size of the LCD display: 45 * 19 mm / Approx.1.8 * 0.75 inch * Unit size: approx. 278 (L) mm x 52 (W) mm x 24 (Thickness) mm/11*2.05*0.95 inch * Unit weight: approx. 397g(Battery not included) * Package dimensions:285 x 67 x 46mm / Approx Package Included: 1 x 400 mm Digital Angle Finder 1 x Angle Finder Case

Manufacturer: Incra

We've reinvented the protractor by putting extra long guide slots at every 45", 30", 22.5", 5", 1" and 0.5" interval to plot any angle with ease and absolute accuracy. If you take a few seconds to remove the T-bar you will also have an excellent 160mm rule with micro-fine marking holes at every 1mm.

Manufacturer: Husky Brand: Husky Model: 828H

The Husky Sliding Digital T-Bevel can be used in woodworking by carpenters and craftspeople in workshops. With the ability to hold and transfer angles between workpiece, this tool will improve accuracy and save time. The Sliding Digital T-Bevel gauge takes the guesswork out of angle duplication and eliminates the problems associated with analog readings and manual measurement transfer. It is ideal for measuring, storing and transferring inside and outside angles when building cabinetry, furniture and picture frames, installing tile and more. The large LCD display integrates an 8 in. stainless steel blade with a steel locking knob. Practical function buttons make it ultra-convenient for setting and transferring measurements instantly.

Manufacturer: Guilin GemRed Sensor Technology Co., Ltd Brand: Gemred Model: 82413-00

GemRed 360 Digital Protractor FeatureWith absolute level sensor, no need to calibrate by your selfWith backlight, easy to readSetup of precise machinesDisplay always reads upright, no matter which way it is turnedLow battery indicatorTechnical dataItem No.: 82413-00Measuring range: 4*90 degreeWorking temperature: 0 degree ~ +50 degree IP Grade: IP65Magnetcs: NOBattery: 2*1.5V AAAlkaline battery(Included)Battery life: More than 100 hours in continuous using