Protractors - Page 6

Manufacturer: Starrett Brand: Starrett Model: H33-1224

This square head fits blades for all combination squares, combinaton sets and bevel protractors for size 12", 18", 24", 300mm and 600mm blades.

Manufacturer: COLE-PARMER Brand: SmartTool Technologies

The Digital Protractor is a revolutionary tool that provides an immediate digital reading of all angles in a 360° range. The unit utilizes a liquid-filled sensor combined with precision measurement circuitry to provide unparalleled accuracy and stability. The precision machined aluminum frame provides a rigid, lightweight, ultra-precise platform for extremely accurate measurements. The frame is grooved along the bottom surface to facilitate use with round objects such as pipes or shafts and incorporates threaded holes on the bottom for rigid attachment if desired. The front panel buttons can be used to capture desired readings or to designate an alternate reference surface from which subsequent angles are then measured. The unit can also be easily recalibrated in the field to factory accuracy using any available flat surface. FEATURES Full 360° range (90° x 4) East to read LCD display which flips over when unit is upside down Maximum accuracy of ±0.1° and maximum resolution of 0.1° Precision, machined aluminum frame Unit can be recalibrated to factory accuracy in the field without special tools or fixtures Automatic power down feature What's Included: Rigid plastic case Full 360° range Operate up to 500 hours on a single 9V battery

Manufacturer: Starrett Brand: Starrett Model: C434-12-4R

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency.

Manufacturer: Alvin Brand: Alvin Model: P234

Center cutout for easy lifting. Features a full 360 degree of long-lasting graduations and beveled edges. Made of durable 0.08" thick polystyrene.

Manufacturer: Whitelotous Brand: Whitelotous

Specification: Material: stainless steel Color: as picture shows Size: approx. 198 x 53 x 14mm/ 7.80 x 2.09 x 0.55" Used to draw radial lines, setting bevels and transferring angles Double graduation from 0-180 degree Brass locking nut 1 x stainless steel protractor

Manufacturer: Iuhan Brand: Iuhan

Feature: Condition:100%Brand New and High Quality Production Name: Cheek Retractor/mouth opener/ Lip Retractors/ Cheek Expanders Material: Plastic Color: Clear Shape: C-shape Size: 118*85*17mm Function: Plastic retractor that helps give you an unobstructed view of the oral cavit Package Content: 20pcs C-Shape BlueTeeth Whitening Intraoral Cheek Lip Retractor Mouth Opener Size M

Manufacturer: BufTec Store Brand: BufTec Hardware

Improve Quality while Saving Time! This Angle-izer Template Tool by BufTec Hardware is the Ultimate Template for your tool box. It is an easy-to-use tool that can be used to measure any angle, shape, and form. Plus, after reviewing your feedback, we fixed what needed to be fixed - the new & improved durability will give you the confidence to bring along with you to any job.

Manufacturer: Dasco Brand: DASCO Model: AF700VM

Dasco Pro angle finders are molded of high impact plastic and allow the user to read any angle instantly and accurately from 0Degree to 90Degree in any quadrant. Accurate to within 1/2 of 1 degree. Not affected by magnetic fields, cold or heat. Angle and grade chart shows angles in degrees and converts them to pitch per inch and pitch per food. Available with optional features.

Manufacturer: Taylor Toolworks Brand: Taytools

8 inch 200 mm digital protractor with rule 2 in 1. This super handy and precise digital protractor is perfect for making ultra-precise angled measurements and project layouts. It has the following features: 1) 1.375 inch wide by 8 inch long stainless steel blades with photo etched graduations in mm and quick reading 32nds 2) Closed length 8.4 inches, full open length 15.5 inches 3) Zero function allow setting of zero at any angle point 4) Display reads continuously as arms are adjusted 5) Measures both inside and outside angle measurements 6) Large clear LCD display 7) Strong blade lock holds securely for transfer of measurements 8) Measuring range: 0-360 degrees 9) Powers off after 5 minutes of nonuse 10) Resolution: 0.1 degree 11) Accuracy: +/- 0.3 degree 12) Repeatability +/- 0/1 degree 13) Battery: 3V CR2032 with approximately 5000 hours of continuous use

Manufacturer: DX Brand: IDS Home Color: black

Color: Black Material: Environmental plastic Application: Drainage angles and run-off slopes; Tool setting on Lathes; Setting blade angle of Circular Saws; Setting blade angle of Miter Saws; Setting work piece angle for milling; Grader and tractor work alignment; Platform monitoring; Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table Other: Display screen: 1.6 inch LCD; Measurement range: 4 x 90 degree; Resolution: 0.1 degree; Powered by 2 x CR2032 3V batteries (included); Working temperature: 0��C~40��C; Relative humidity: 40%~80%; Readings can be shown in Degree or Percentage. Compared with traditional inclinometers, this product equips 3 pieces of strong magnet so that it can firmly be attached to metal surfaces; In addition, the reading is always displayed upright even the inclinometer is upside down; Moreover, you can simply place the meter on a reference surface zero to measure relative angle, then it will give a result of measured slope angle. With absolute angle measurement, you will able to test whether the working surface is on the level. You can use this function to check roof slopes and wheel alignment etc. This meter works great for miter and table saws, detailed applications are listed as follows. Dimensions: 2.20 in x 2.17 in x 0.63 in (5.6 cm x 5.5 cm x 1.6 cm) Weight: 1.41 oz (40 g)Packing List: 1 x Electronic digital Angle Meter 1 x Chinese user manual