|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $24.95
Manufacturer: No-Dog Tools, Inc.
Brand: No-Dog
Model: NODOG-Blue
Manufacturer: No-Dog Tools, Inc.
Brand: No-Dog
Model: NODOG-Blue
|
The No-Dog is a handy tool for electricians that eliminates "dog-legs" in offsets and saddles. It is precision tooled from lightweight, durable aluminum. Measuring 1/2" by 1" by 2", it is useful as a spacer with multiple runs of conduit. This size also makes it convenient to carry. The "No-Dog" can fit easily in a pocket or tool box, or can be clipped to a hardhat or tool pouch. The No-Dog offset level is proudly made in the USA
How to use your No-Dog offset level
1. Position conduit in bender.
2. Attach "No-Dog" to conduit at either end as shown below. Do not move "No-Dog" until all the bends are finished to insure that all bends will be on the same plane.
3. Adjust bender pressure on conduit so conduit is snug yet loose enough to be turned with a pair of channelloks, pipe wrench or chain wrench.
4. Turn conduit until "No-Dog" shows level.
5. Bend conduit to desired angle.
6. Release bender pressure.
7. Turn conduit 180 degrees and position at next bend mark.
8. Repeat steps 3 and 4.
9. Make next bend.
10. For additional bends on same plane, repeat steps 6, 7, 8, and 9.
What's included?
1 - No-Dog offset level
1 - No-Dog hard hat sticker
1 - Offset formula and fraction to decimal conversion chart
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $24.95
Manufacturer: No-Dog Tools, Inc.
Brand: No-Dog
Model: NODOG-Purple
Manufacturer: No-Dog Tools, Inc.
Brand: No-Dog
Model: NODOG-Purple
|
The No-Dog is a handy tool for electricians that eliminates "dog-legs" in offsets and saddles. It is precision tooled from lightweight, durable aluminum. Measuring 1/2" by 1" by 2", it is useful as a spacer with multiple runs of conduit. This size also makes it convenient to carry. The "No-Dog" can fit easily in a pocket or tool box, or can be clipped to a hardhat or tool pouch. The No-Dog offset level is proudly made in the USA
How to use your No-Dog offset level
1. Position conduit in bender.
2. Attach "No-Dog" to conduit at either end as shown below. Do not move "No-Dog" until all the bends are finished to insure that all bends will be on the same plane.
3. Adjust bender pressure on conduit so conduit is snug yet loose enough to be turned with a pair of channelloks, pipe wrench or chain wrench.
4. Turn conduit until "No-Dog" shows level.
5. Bend conduit to desired angle.
6. Release bender pressure.
7. Turn conduit 180 degrees and position at next bend mark.
8. Repeat steps 3 and 4.
9. Make next bend.
10. For additional bends on same plane, repeat steps 6, 7, 8, and 9.
What's included?
1 - No-Dog offset level
1 - No-Dog hard hat sticker
1 - Offset formula and fraction to decimal conversion chart
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $24.95 1% OFF
Manufacturer: Big Johnson
Brand: Big Johnson
Color: White
Manufacturer: Big Johnson
Brand: Big Johnson
Color: White
We dont stop until you get drilled, nailed and hammered
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $24.95 1% OFF
Manufacturer: Grizzly
Brand: Grizzly
Model: H2699
Manufacturer: Grizzly
Brand: Grizzly
Model: H2699
Every machinist should have at least 1 each of these Precision Ground Angles Squares. They are indispensable for set-up work, whether it be for parts or entire machines. All feature precision angles for inside or outside use, relieved inside angle and stainless steel construction. Choose from the smaller sizes for tight work or the larger versions for setting up the big jobs.
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $24.95
Manufacturer: No-Dog Tools, Inc.
Brand: No-Dog
Model: NODOG-Black
Manufacturer: No-Dog Tools, Inc.
Brand: No-Dog
Model: NODOG-Black
|
The No-Dog is a handy tool for electricians that eliminates "dog-legs" in offsets and saddles. It is precision tooled from lightweight, durable aluminum. Measuring 1/2" by 1" by 2", it is useful as a spacer with multiple runs of conduit. This size also makes it convenient to carry. The "No-Dog" can fit easily in a pocket or tool box, or can be clipped to a hardhat or tool pouch. The No-Dog offset level is proudly made in the USA
How to use your No-Dog offset level
1. Position conduit in bender.
2. Attach "No-Dog" to conduit at either end as shown below. Do not move "No-Dog" until all the bends are finished to insure that all bends will be on the same plane.
3. Adjust bender pressure on conduit so conduit is snug yet loose enough to be turned with a pair of channelloks, pipe wrench or chain wrench.
4. Turn conduit until "No-Dog" shows level.
5. Bend conduit to desired angle.
6. Release bender pressure.
7. Turn conduit 180 degrees and position at next bend mark.
8. Repeat steps 3 and 4.
9. Make next bend.
10. For additional bends on same plane, repeat steps 6, 7, 8, and 9.
What's included?
1 - No-Dog offset level
1 - No-Dog hard hat sticker
1 - Offset formula and fraction to decimal conversion chart
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $24.95
Manufacturer: Grizzly
Brand: Grizzly
Model: H2687
Manufacturer: Grizzly
Brand: Grizzly
Model: H2687
This simple, yet effective protractor is made from ground stainless steel and features easy-to-read engraved lettering, 8" beam and 11 1/2" blade. The scale reads from 0 degrees - 180 degrees from both left and right.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $24.95
Manufacturer: No Dog
Brand: No-Dog
Manufacturer: No Dog
Brand: No-Dog
This handy device eliminates "dog legs" in offsets and saddles.
It is a precision tool made from lightweight, durable aluminum, then heat treated for extra strength.
No DOG can be used for a spacer with multiple runs of conduit as it measures 1/2" x 1" x 2". • The compact size and shape allows it to be carried comfortably in any pocket, clamped to your hardhat, tool pouch or clothing.
Comes in Black,Blue, Brown,Gold,Green,Purple,Red,Silver
This listing is for ONE level. Images used for example only.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $24.99
Manufacturer: Products Engineering Corporation PEC Tools
Brand: Products Engineering Corporation PEC Tools
Manufacturer: Products Engineering Corporation PEC Tools
Brand: Products Engineering Corporation PEC Tools
This precision machinist rule is made in the USA by Products Engineering Company (PEC Tools), a premier US tool manufacturer. It is coated with Titanium Nitride for extreme scratch resistance and ultra-high contrast. It is made from the finest steel available and is hardened and tempered. Graduations are precision photo etched and then black filled for easy readability. English / Metric graduations show 5 mm and mm markings on one side and 32nds and 64ths on the reverse. Rule is .75 inches wide and .035 inches thick. Both long edges are ground flat and straight.
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $24.99 1% OFF
Manufacturer: Circle Perfect Tools, LLC
Brand: Circle Perfect Tools
Model: CPDS-104LD
Manufacturer: Circle Perfect Tools, LLC
Brand: Circle Perfect Tools
Model: CPDS-104LD
Check out this all-in-one Compass, Circle Ruler, and Protractor from Circle Perfect Tools. Use as a compass for drawing perfect circles/arcs, or a ruler for measuring existing circles, as well as a protractor/goniometer for visualizing and measuring angles.
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $24.99
Manufacturer: Circle Perfect Tools, LLC
Brand: Circle Perfect Tools
Model: CPDS-104LF
Manufacturer: Circle Perfect Tools, LLC
Brand: Circle Perfect Tools
Model: CPDS-104LF
Check out this all-in-one Compass, Circle Ruler, and Protractor from Circle Perfect Tools. Use as a compass for drawing perfect circles/arcs, or a ruler for measuring existing circles, as well as a protractor/goniometer for visualizing and measuring angles.
|
|