Bore Gauges - Page 14

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00224001

The Standard Gage 00224001 Value Vernier Depth Gauge has a measurement range of 0 to 4" and is accurate to + or - 0.00020". Gradient spacing is 0.001" and the base is 2.5". Four high accuracy interchangeable depth rods are adjusted in increments of 1". The ratchet friction thimble and locking nut provide accurate measurement readings and adjustments. The base surface is hardened and ground for accurate readings. There is no need for resetting when changing rods. The gauge is made of steel for durability. Designed for measuring the depth of holes, slots, and recesses, and for inspecting jib, fixtures, and die work, these depth gauges are also convenient for measuring coordinate distances from a work surface to toolmakers' buttons.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-1D8

Setting ring, 1.8 inch dia.

Manufacturer: HHIP Brand: HHIP Model: 4400-0062

0.4-0.7" Dial Bore Gage ~ .0005" Graduation ~ 4" probe depth. ~ 11 anvils included. ~ for close tolerance measurements of holes, taper and roundness. ~ Gages are supplied with an AGD Group II dial indicator. ~ Easy setting with micrometers or ring gages. ~ Self centering. ~ Fitted case with anvils index.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-19H32

Setting ring, 19/32 inch dia.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-7H8

Setting ring, 7/8 inch dia.

Manufacturer: Starrett Brand: Starrett Model: 82B5

All probes are furnished with an actuating rod.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-646-200-0

The Fowler 52-646-200 Dial Cylinder Bore Gauge has a measurement range of 2.6 to 7" and gradient spacing of 0.001". This direct-measuring gauge measures bores to a depth of 8". It uses a two-point contact system for the detection of geometry problems such as ovality and taper, and tungsten carbide contact tips provide high wear resistance.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0051

HHIP digital electronic bore gages features zero reset allows absolute or comparative measurements extra large LCD, 360 degree rotation dual display: digital and electronic scale power supply: 3V CR2032 lithium battery true inch/mm conversion one button easy calibration product specifications: range: 40- 70" 10-18 mm; probe depth: 4"; no. Of anvils: 9.

Manufacturer: Flexbar Brand: Flexbar

Polishing Comparator for MicroinchTM Comparator Plates. Comparator Plates feature: surface roughness (texture) comparison standards made of solid electroformed nickel; the largest variety of standards available for assessing and specifying - by symbol, the Degree of Roughness of machined parts including every machining method known.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0052

HHIP digital electronic bore gages features zero reset allows absolute or comparative measurements extra large LCD, 360 degree rotation dual display: digital and electronic scale power supply: 3V CR2032 lithium battery true inch/mm conversion one button easy calibration product specifications: range: 70- 1.5" 18-35mm probe depth: 6"; no. Of anvils: 9.