Bore Gauges - Page 19

Manufacturer: Starrett Brand: Starrett Model: 84Z-134-6J

The Starrett 84Z-134-6J Dial Bore Gauge has a measurement range of 5 to 8.125" and gradient spacing of 0.0005". Two centralizing plungers provide accurate tool alignment within the bore. This direct-measuring gauge uses a two-point contact system for detection of geometry problems such as ovality and taper. Contact points are made of hardened tool steel contact points for wear resistance and are spring-loaded for sensitivity. The housing and knurled handle are made of aluminum for a lightweight feel and good balance. Dial indicators have jewel bearings for sensitivity and the gauge is furnished in a finished wood case.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Digital Electronic 3-Point Internal Micrometers. Self-Centering 3-Point Bore Micrometers For The Accurate Measurement Of Internal Diameters. Each 3-Point Bore Micrometer Comes In Its Own Fitted Hard Case Complete With Setting Ring And Depth Extension. Ring Gage Certificate To NIST Available Upon Request. Self-Aligning And Self-Centering Carbide Tipped Measuring Contact Points Suitable For Blind Bore Measurements. Ratchet Stop Provides Uniform Measuring. Setting Ring Accuracy: .000020"Resolution: .00005"/0.0001mm (Inch/Metric Conversion) Thimble Graduation: 0.0001" Easy To Read Electronic Digital Display With The Following Measurement Functions: Absolute And Incremental Measurement Tolerance Settings Preset (+ And -) Hold Key SPC Data Output Capability (RS232C) Model No. 20852, Digital 3-Point Bore Micrometer, Measuring Range: .425-.500"

Manufacturer: Flexbar Brand: Flexbar

Flexbar Digital Electronic 3-Point Internal Micrometers. Self-Centering 3-Point Bore Micrometers For The Accurate Measurement Of Internal Diameters. Each 3-Point Bore Micrometer Comes In Its Own Fitted Hard Case Complete With Setting Ring And Depth Extension. Ring Gage Certificate To NIST Available Upon Request. Self-Aligning And Self-Centering carbide Tipped Measuring Contact Points Suitable For Blind Bore Measurements. Ratchet Stop Provides Uniform Measuring. Setting Ring Accuracy: .000020" Resolution: .00005"/0.0001mm (Inch/Metric Conversion). Thimble Graduation: 0.0001". Easy To Read Electronic Digital Display With The Following Measurement Functions: Absolute And Incremental Measurement Tolerance Settings Preset (+ And -) Hold Key SPC Data Output Capability (RS232C) Model No. 20853, Digital 3-Point Bore Micrometer, Measuring Range: .500-.650"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-745

Precise, fast, repeatable measurements of bore diameters.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-255-565-0

The Fowler XT Large Capacity Inch Holemike Bore Gauge Set comes with a variety of heads, handles, and setting rings. Gauges have a ratchet stop for consistent measuring and non-removable anvils. This direct-measuring gauge uses a three-point contact system and tungsten carbide contact points above 0.5". Setting rings are included. Each gauge is individually serialized.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: INSIZE Brand: INSIZE Model: 1148-P101

0197 inch disk point.

Manufacturer: INSIZE Brand: INSIZE Model: 7261-200

Inside Spring caliper, 8 inch.

Manufacturer: iGaging Brand: iGaging Model: 34-668

Super Precision Bore Gauge Deep cylinder bore gageing to a depth of 10" affords the user the ability to measure out-of-round conditions and tapers of cylinders without the necessity of removing pistons - critical wear area of the cylinder can be reached with this gauge. Super precision up to 0.0005" at range from 1.4" to 6"Features:Super Precision Deep Bore GaugeMeasures bore to 10" deep, Range 1.4" to 6" diameter0.0005" precision graduationsIncludes gage and interchangeable contact pointsDial indicator contains jeweled bearings, ABS storage case included.

Manufacturer: Meda - Superior Import Brand: Meda - Superior Import

For close tolerance I.D. measurements. Sets include dial indicator with protective cover, anvils, and spacers, in a fitted case. * Graduation: .0005"

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EE20-5007