Hole Gauges - Page 6

Manufacturer: TTC Brand: TTC

Permits use in holes, slots and recesses. Half ball gages permit use in shallow holes, slots and recesses.

Manufacturer: Kaufhof Brand: Kaufhof

Kaufhof AGB0359 sheet metal bore gage is a handy gage for measuring cylindrical bores, bearing work and for gaging slots.

Manufacturer: Starrett Brand: Starrett Model: 58S

With spindle hole diameters 1/4", 5/16", 3/8" (6.3, 8, 9.5mm). Gripping hole diameters range from 3/32-1/4"used on holders with smaller clamp hole. universal Snug: 1/4”, 5/16”, 3/8” Spindle Hole Diameters.

Manufacturer: MITUTOYO Brand: Mitutoyo

3/4 to 1-1/4 in Telescoping Gage|Telescoping Gage, 0.75-1.25" Spring-loaded plunger expands within the bore (or groove), allowing determination of the internal diameter (or groove width)With a knurled clamp

Manufacturer: Starrett Brand: Starrett Model: 579B-12

Telescoping gauge is used for determining the true size of holes, slots, and recesses up to 6". The ends of both contact is hardened and ground to a radius to allow proper clearance on the smallest hole the gauge will enter. This tool must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gauge contact with a micrometer.

Manufacturer: STAKF Brand: Starrett Model: S229GZ

The Starrett S229GZ set of five telescoping gauges measures 1/2 to 6" holes, slots, and recesses in woodworking, metalworking, machining, layout, and pattern-making applications. The five gauges measure from 1/2 to 3/4", 3/4 to 1-1/4", 1-1/4 to 2-1/8", 2-1/8 to 3-1/2", and 3-1/2 to 6". Each gauge has one rigid contact arm and one spring-tensioned telescoping arm for taking measurements. The contacts are hardened and ground to a radius for clearance within holes. Four handles measure 2-3/8" and one handle measures 3-1/4" in length. A lock at the end of the handle secures the gauge width for measurement with a micrometer (sold separately). The gauge set comes in a protective case for storage. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. What's in the Box?(5) piece telescoping gauge setProtective case

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 154-102

Mitutoyo Small Hole Gage, Range: 5mm to 7.5mm

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 155-131

Mitutoyo Telescoping Gage, Range: 54mm to 90mm

Manufacturer: Starrett Brand: Starrett Model: 229D

Telescoping gauge is used for determining the true size of holes, slots, and recesses up to 6". The ends of both contact is hardened and ground to a radius to allow proper clearance on the smallest hole the gauge will enter. This tool must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gauge contact with a micrometer.

Manufacturer: Starrett Brand: Starrett Model: 229E

Telescoping gauge is used for determining the true size of holes, slots, and recesses up to 6". The ends of both contact is hardened and ground to a radius to allow proper clearance on the smallest hole the gauge will enter. This tool must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gauge contact with a micrometer.