Outside Micrometers - Page 68

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-229-204-0

Fowler 52-229 series outside Vernier-scale micrometers have a choice of measuring range and a flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" microfine graduation intervals on a satin chrome finish for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have 0.256" diameter hardened, precision-ground, and micro-lapped carbide measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet stop-thimble can be used independent of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated frame helps reduce temperature-related expansion or contraction, providing accurate measurements, and protects the operator's hands from heat. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.0001" Thimble style Friction with ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00005" on 0 to 1" micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micromet...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-225-226-0

Fowler Full Warranty Economy Digit Counter Depth Micrometer comes with 2.5" base. It has 0-6" Measuring Range and 0.001" graduation. It has a ratchet thimble, a locking clamp and lapped 4” base for repeatable, accurate readings. Our 52-225-176-0 digit counter depth micrometer also has easy to read Digit Counter (.001”) and satin chrome finish. Includes 6 rods; Diameter: .176", adjusting wrench and fitted case. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gauges, and digital scales. The company, founded in 1946, is headquartered in Newton, MA. What is in the box? 0-6" Digit counter depth micrometer 6 interchangeable rods Adjusting wrench Fitted case

Manufacturer: Global Specialties Brand: Anaheim Scientific Model: M120

The M120 uses a highly accurate sensor chip to measure relative humidity and temperature. With dew-point and wet-bulb measurements, it is perfect for many industrial applications, laboratory and other types of work environments. The M120 is durable, reliable, and easy to use.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-226-661-0

Fowler 52-226 series EZ-Read digit micrometers have a 0 to 1" measuring range and a pointed anvil/spindle pair with a choice of 15-degree or 60-degree point for measuring small flutes, recesses, grooved wires, keyways and other hard-to-reach areas. The digit display has 0.0001" graduation intervals and an accuracy of 0.00016" for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings. The anvil/spindle pair have hardened, precision ground, and micro-lapped high-grade steel measuring faces to provide accuracy, wear resistance, and long life. A friction thimble provides smooth and quiet operation, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. SpecificationsDisplay type Digit Anvil/spindle style 15-degree or 60-degree Measuring range 0 to 1" Graduation interval 0.0001" Accuracy 0.00016" Thimble style FrictionMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-252-001-0

The Fowler 52-252-001 multi-anvil outside micrometer has a digit display with a 0.0001" resolution, a 0 to 1" measuring range, and an interchangeable anvil for measuring tube thickness, shoulder edge distances, rivet heads, and other hard-to-measure workpieces. The flat spindle has a carbide-tipped measuring face for wear resistance and the interchangeable flat and rod-style anvils provide a variety of measuring options. The flat anvil has a thickness of 0.065" and a 1" length. The rod-style anvil has a 0.120" diameter and a 1" length. The locking lever on the spindle locks measurements in place for accurate readings. A friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The micrometer includes a flat anvil, rod-style anvil, an Allen key, a wrench and a fitted case. SpecificationsDisplay type Vernier scale Anvil style Interchangeable flat and round Spindle style Flat Measuring range 0 to 1" Graduation interval 0.0001" Thimble style Friction Flat anvil dimensions 0.065" thickness; 1" length Round anvil dimensions 0.120" diameter, 1" lengthMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instrument...

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00124028

The Standard Gage outside digital micrometer set includes a set of digital micrometers and standards for zero-setting, and comes with a fitted case for storage. Each micrometer has a mechanical digit counter for precise reading to 0.0001”, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism for uniform pressure during adjustment.The vernier scale on the thimble and sleeve is graduated to 0.0001”, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00124029

The Standard Gage outside digital micrometer set includes a set of digital micrometers and standards for zero-setting, and comes with a fitted case for storage. Each micrometer has a mechanical digit counter for precise reading to 0.0001”, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism for uniform pressure during adjustment.The vernier scale on the thimble and sleeve is graduated to 0.0001”, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-225-224-1

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-247-000-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-870-003-0

The Fowler 54-870 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm provide precise readings and accurate measurements. Carbide measuring faces provide long life and wear resistance. A ratchet thimble applies consistent force for repeatability between users. A jet back and grey enamel finish provide durability and wear resistance. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a CR2032 battery (included), and includes a fitted case. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016"/0.004mmThimble styleRatchetData outputRS-232PowerCR2032Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V...