|
|
-
3.6 of 5.0 with 3 Reviews
SALE PRICE: $175.00 21% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 436.1XRL-4
Manufacturer: Starrett
Brand: Starrett
Model: 436.1XRL-4
|
The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001†or 0.0001†depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
3.6 of 5.0 with 46 Reviews
SALE PRICE: $175.80 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 111-116
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 111-116
|
The Mitutoyo 111 series spline micrometer has a small-diameter anvil and spindle for measuring splined shafts, slots, and keyways, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
3.6 of 5.0 with 19 Reviews
SALE PRICE: $183.10
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Features Protected to IP54 specifications Rugged steel design Large LCD Display Absolute /.001mm Direct RS232 output Carbide measuring faces
-
3.6 of 5.0 with 3 Reviews
SALE PRICE: $185.00 23% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 436.1XRL-5
Manufacturer: Starrett
Brand: Starrett
Model: 436.1XRL-5
|
The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001†or 0.0001†depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
3.6 of 5.0 with 3 Reviews
SALE PRICE: $193.99 3% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 436.1XRL-3
Manufacturer: Starrett
Brand: Starrett
Model: 436.1XRL-3
|
The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001†or 0.0001†depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
3.6 of 5.0 with 10 Reviews
SALE PRICE: $197.40 19% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-241
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-241
|
The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm for outside diameter (OD) measurement, and a ratchet-stop mechanism that helps provide precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. On some models, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, wh...
-
3.6 of 5.0 with 34 Reviews
SALE PRICE: $198.09 13% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 125-103
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 125-103
|
The Mitutoyo 125 series screw thread micrometer has a 60-degree V-anvil and conical spindle for measuring pitch diameters of metric or unified screw threads. It also has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment.sThe micrometer’s frame has a Hammertone, baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer’s ratchet-stop mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position, while the anvil holder has a fine screw adjustment and locking device. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
3.6 of 5.0 with 7 Reviews
SALE PRICE: $199.00
Manufacturer: Miller Supply Inc
Brand: Miller Supply Inc
Manufacturer: Miller Supply Inc
Brand: Miller Supply Inc
Accurately measure the thickness of poly and other materials for precise quality control. Standard features include thimble ratchets, carbide tipped measurement surfaces, thimble locks, a calibration wrench, and storage case. The digital micrometer displays outside dimensions to 100 millionths and shows "reverse" and "deviation" techniques. It also has a unique vernier scale to confirm the digital reading.
-
3.6 of 5.0 with 3 Reviews
SALE PRICE: $201.00 3% OFF
Manufacturer: Starrett
Brand: Starrett
Model: T436.1XRL-3
Manufacturer: Starrett
Brand: Starrett
Model: T436.1XRL-3
|
The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001†or 0.0001†depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
3.6 of 5.0 with 47 Reviews
SALE PRICE: $203.60 7% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Includes wrench and case Series No. 52-248 offers Fowler standards of fine quality and accuracy. A variety of sizes covers a range of measuring applications. Features Hammertone blue baked enamel finish Microfine graduations on satin chrome finish and carbide tipped measuring faces Ratchet stop thimble for exact and repetitive readings Spindle thread is hardened, ground and lapped Anvil & spindle hardened and precision ground with microlap finish on tips All micrometers meet or exceed U.S. Federal specifications for accuracy
|
|