Outside Micrometers - Page 60

Manufacturer: MEDA - SUPERIOR IMPORT Brand: Meda - Superior Import

• Non-rotating spindle. • .0001" Graduation. • Laser engraved graduations. • Ratchet friction thimble. • Enamel frame.

Manufacturer: INSIZE Brand: INSIZE Model: 3109-75E

Electronic outside micrometer, 2-3"/50-75mm.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-228-2-1

Comes in wooden case

Manufacturer: Fowler Brand: Fowler

Includes wrench and case Featuring clear, easy to read numbers on a digital counter, Fowler's digit counter micrometers are an economical, fast and easy-to-useaddition to the machinist's toolchest, the shop floor or in the QC area. Features Hammertone baked enamel frame with heat insulated frames. Microfine graduations on satin chrome. Ratchet thimble. Anvil and spindle hardened and precision ground with microlap finish on carbide tipped measuring faces. Spindle thread is hardened, ground and lapped. Diameter of measuring faces is 2.56" Digital counter reads to .001"/0.1mm with .0001"/.01mm on vernier. Quick, easy zero adjustment on sleeve. Positive locking nut on spindle. Graduation: .0001" Accuracy: .0002" Flatness: .00003" Standard included

Manufacturer: Starrett Brand: Starrett Model: T436.1XRL-2

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG00-0906

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00124041

The Standard Gage Value outside micrometer set includes a set of micrometers and standards for zero-setting, and comes with a fitted case for storage. Each micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism that helps provide uniform pressure during adjustment for precise, repeatable measurement. The The vernier scale on the thimble and sleeve is graduated to 0.0001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 796.1XFL-1

The Starrett 796.1 electronic micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust, and other contaminants in hostile shop environments. The 796.1 electronic micrometers are built with Customary Starrett quality and workmanship. 0-1 inch.

Manufacturer: L.S. Starrett Brand: L.S. Starrett

Technical Specification Item Outside Micrometer Thimble Friction Anvil Flat Spindle Flat Lock Nut Type Ring Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Starrett Brand: Starrett Model: 436.1XRL-1 W/SLC

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.