Outside Micrometers - Page 53

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-302-0

The Fowler 54-860 series digital outside micrometer has a disc-style anvil/spindle pair, a choice of measuring range, and an LCD with an inch/metric switchable resolution for measuring the thickness of narrow grooves and difficult or closely spaced areas, such as slots and recesses. Disc micrometers are also used to measure ribs, keys, fins, cutting edges on forming tools, and the chordal thickness of gear teeth. Carbide measuring faces provide wear resistance. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleDisc anvil/spindle pairResolution0.00005"/0.001mmThimble styleFrictionAnvil/spindle diameter0.250"/6.35mmDisc diameter0.788"/20mmDisc center hole diameter0.315"/8mmDisc edge thickness0.035"/0.89mmTotal disc depth0.130"/3.3mmData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to m...

Manufacturer: uxcell Brand: uxcell Model: a15090800ux0396

External and inner diameter can be measure by this slide caliper.It can also measure depth of a hole from the probe that slides out.

Manufacturer: HHIP Brand: HHIP Model: 4401-0044

Portable Micrometer Stand ~ Micrometer stand is uniquely designed for easy locking and carrying around. ~ Stand can be folded to a dimension of 4.6" x 3.2" x 1.5". ~ Lacquered cast iron stand that weighs approximately 2 lbs.

Manufacturer: iGaging Brand: iGaging

Professional quality opticsiGaging is the professionals choice. Designed to provide an undistorted flat field of view larger and brighter than similar magnifiers with its type of power. Make precise measurements with its scale from 0-0.18" by 0.002". Always in focus! No moving parts.Compound lens system of four parts gives accurate readingsClear graduation scale 0-0.18" by 0.002"Super clear vision. Anodized aluminum body, glass lensesLifetime warranty

Manufacturer: Generic Brand: Generic

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 102-701

The Mitutoyo 102 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame is tapered for measuring narrow slots and tight spaces, has a baked enamel finish for protection and durability and a friction grip. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm, depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-248-008-1

The Fowler 52-248 series outside micrometer has a flat anvil/spindle pair with a choice of measuring range and 0.01mm graduations for general purpose measuring. The Vernier scale has 0.01mm graduations and an accuracy of 0.001mm for precise readings and accurate measurements. The anvil/spindle pair has a 6.5mm diameter, 0.00076mm flatness, and 0.000125mm parallelism on the 0 to 25mm micrometer for accurate measurements. Hardened, ground, and micro-lapped measuring faces provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. Friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame provides durability and long life. The micrometer includes a wrench and a fitted case. Micrometers 50mm and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.01mm Accuracy 0.001mm for 0 to 25mm micrometers Thimble style Friction or ratchet Anvil/spindle diameter 6.5mm Flatness 0.00076mm Parallelism 0.000125mmMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. ...

Manufacturer: Precise Brand: Precise

Includes 4 Micrometers with measuring ranges: 0 - 1", 1 - 2", 2 - 3", 3 - 4". Super Hard Carbide Tipped. Complete with calibration standards and wrenches. Ratchet handle for precise application of force. Fitted padded case included!

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2025-4201

Base: 4" No. of rods: 6

Manufacturer: HHIP Brand: HHIP Model: 4200-0228

2-3" Screw Thread Micrometer Kit 0.001 Graduation Anvils #7-10 Direct reading of pitch diameter in threads with interchangeable anvil and spindle pairs. Anvils and spindles made of tool steel, hardened and ground. Micro fine slant line graduations. with fitted case. Anvil #7 Pitch TPI: 28-20, Anvil #8 Pitch TPI: 18-12, Anvil #9 Pitch TPI: 11-7, Anvil #10 Pitch TPI: 6-4.5.