Outside Micrometers - Page 57

Manufacturer: INSIZE Brand: INSIZE Model: 3292-4

Hub micrometer, 3-4", graduation 0001".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 102-718

The Mitutoyo 101/102 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame is tapered for measuring narrow slots and tight spaces, has a baked enamel finish for protection and durability, and a friction grip. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001”, depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 111-215

The Mitutoyo 111 series spline micrometer has a small-diameter anvil and spindle for measuring splined shafts, slots, and keyways, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: ASIMETO Brand: ASIMETO Model: 116-04-1

Carbide tipped, Digital Micrometers & Sets, ASIMETO

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 350-253-30

Mitutoyo 350-253-30 MHN3-25MX, Micrometer Head, Spherical, 10 mm Stem, 25 mm, 0.001 mm.

Manufacturer: INSIZE Brand: INSIZE Model: 3108-2

Electronic outside micrometer, 1-2 inch.

Manufacturer: Fowler Brand: Fowler

Features Ball anvil and spindle for measuring special curved surfaces Protected to IP54 specifications Large LCD display, 8.5mm Automatic switch off Hardened steel measuring face Absolute /25mm include standard

Manufacturer: Mahr-Federal Inc. Brand: Mahr Federal

Outside Micrometer, 1-2 In, 0.0001 In Resolution, Ratchet Thimble, Flat Anvil, Flat Spindle, SPC Output No, Lock Nut Type Lever, Chrome Plated Steel Frame, Carbide Tipped Anvil and Spindle, Meets/Exceeds DIN 863-1, Includes Fitted Case, 1.0 In Calibration Standard Outside MicrometersVernierRatchet stop or friction thimble for exact, repetitive readings. Include a standard bar except for 0" to 1" and 0 to 25mm models.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-225-005-1

The Fowler Premium Depth Micrometers have a measurement range of 0 to 3" or 0 to 4", a base of 2.5" or 4", and a resolution (or smallest graduation interval) of 0.001", with + or – 0.0003" of accuracy. The vernier scale of microfine graduations on satin chrome finish provides precise, readable measurements. Depending on the range of the model, the gauges include either three or four 1" long/0.176" diameter measuring rods. The rods are interchangeable and are fitted to the gauge spindle against a positive stop and then locked for accuracy and stability. The bases are 2.5"long, and the rods and threads are ground, hardened, and lapped for durability and accuracy. They come with a spanner wrench and hardened case. The gauges conform to Federal Accuracy specifications. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: iGaging Brand: iGaging Model: 35-070-C01

The anvil and spindle have a small diameter (3mm x 10mm) for measuring Splined shafts, slots, and keyways. Igaging 0-1" digital quick micrometer absolute origin speedmic snap lever action gage igaging absolute origin speedmic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position. Quickly measure with Super high precision lever activated - fully opens and closes in less than one second! linear moving sensor provides accurate and reliable measurements IP65 coolant proof measuring range: 0-1"/0-25MM Carbide tipped spindle resolution: 0.00005"/0.001mm accuracy: ±0.00015"/0.003mm fixed thimble. Spc/USB data output available (not included) search Amazon for item: b00inl0ba2. Ball attachment included. Case included 2 years warranty.