Outside Micrometers - Page 8

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-245

The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm for outside diameter (OD) measurement, and a ratchet thimble mechanism that helps provide precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. On some models, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963,...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 102-324

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a heat-insulated frame to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-143-10

The Mitutoyo 103 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: iGaging Brand: iGaging

iGaging 2-3" Digital Quick Micrometer Absolute Origin SpeedMic Snap Lever Action GageiGaging Absolute Origin SpeedMic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position.Quickly measure with super high precisionLever activated - Fully Opens and Closes In Less Than One Second! linear moving sensor provides accurate and reliable measurementsIP65 coolant proofMeasuring Range: 2-3"/50-75mm Carbide tipped spindle Resolution: 0.00005"/0.001mmAccuracy: ±0.00015"/0.003mmFixed Thimble. SPC/USB data output available (not included) Search Amazon for item: B00INL0BA2. Ball Attachment Included. Case included 2 Years warranty

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 123-125

Mitutoyo Disk Micrometer, Range: 0 - 1", Graduations: .001", Thimble: Ratchet, Standard: No, Disk Size:.787" diameter, Disk Material: Hardened steel, Comment: Rotating spindle

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-180

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-345-30

Includes a Mitutoyo Certificate of Calibration that these tools have been calibrated and meet the ISO/IEC 17025 International Standard for testing and calibration laboratories. Ingress Protection certified IP65 for protection against dust and water.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 129-132

Mitutoyo Depth Micrometer, Range: 0 - 6", Graduations: .001", Thimble: Ratchet, Base: 4"

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 293-341-30

Mitutoyo Digimatic Outside Micrometer 293-341-30, 1-2 In/25.4-50.8mm, .00005 In/0.001mm IP65, No Output, Ratchet Stop, With Standard.

Manufacturer: Starrett Brand: Starrett Model: 230P

Starrett Micrometer Part # 50932 230P This is the jewel of precision micrometers used by skilled workmen worldwide. The spindle and anvil are sized at .235" (6mm) to reach places most micrometers cannot reach. Headquartered in Athol, MA, in the heart of New England, where manufacturing began and evolved into what it is today, Starrett has a history and reputation so rich and solid that the words quality and Starrett are virtually synonymous. The broad Starrett product line includes precision tools micrometers, calipers, rules, tape measures, levels, electronic gages, dial indicators, gage blocks, granite surface plates, optical measuring projectors, vision systems, vises, M1 lubricant, and precision ground flat stock. Much of the Companys production is concentrated in hand measuring tools and precision instruments that many manufacturing companies, from small machine shops to Fortune 500 firms, buy for the use of their employees.