|
|
-
3.9 of 5.0 with 39 Reviews
SALE PRICE: $780.40 23% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-290-80-1
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-290-80-1
|
The Brown & Sharpe Micromaster Intrimik Capa LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm). An electrostatic capacitance linear encoder helps ensure repeatable, precise measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The co...
-
3.9 of 5.0 with 49 Reviews
SALE PRICE: $795.00 11% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-873
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-873
|
The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0002â€. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
3.9 of 5.0 with 16 Reviews
SALE PRICE: $803.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-173
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-173
|
The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in metric units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm or 0.005mm depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
3.9 of 5.0 with 18 Reviews
SALE PRICE: $912.77
Manufacturer: Starrett
Brand: Starrett
Model: 124C
Manufacturer: Starrett
Brand: Starrett
Model: 124C
These are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings, measuring parallel surfaces, etc. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3"). Rod diameters are approximately 11/32". Each rod has individual length adjustment for the anvil by means of special wrenches furnished. Movement of screw: 1", Number of measuring rods: 4, Number of spacing collars: One 1" Two 2".
-
3.9 of 5.0 with 33 Reviews
SALE PRICE: $953.00 22% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-004
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-004
|
The Mitutoyo 368 series Holtest vernier inside micrometer has two-point contacts for measurement of the inside dimension (ID) of small bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm. The measuring faces are made of hardened steel and the micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
3.9 of 5.0 with 24 Reviews
SALE PRICE: $985.20 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
Insulated rods marked with length Adjustable for length Measuring rods are solid Hardened and ground anvils Quick-reading figures 6-1/2" (165mm) long handle is available (124H)
-
3.9 of 5.0 with 7 Reviews
SALE PRICE: $1,125.00 13% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-268
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-268
|
The Mitutoyo Digimatic 468 series Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel and TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, ...
-
3.9 of 5.0 with 27 Reviews
SALE PRICE: $1,126.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
The Brown & Sharpe TESA Etalon Intalometer 531 vernier inside micrometer has three-point contacts for measurement of the inside dimension (ID) of through holes, blind bores, or short centering shoulders, and a vernier scale in metric units for taking precise ID measurements. It also has a knurled friction thimble helps provide quick adjustment capability.The micrometer is made of high-grade tool steel and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.002mm. The measuring contacts are made of hardened steel for durability and separated by 120 degrees. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
3.9 of 5.0 with 22 Reviews
SALE PRICE: $1,290.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-269
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-269
|
The Mitutoyo Digimatic 468 series Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel and TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, ...
-
3.8 of 5.0 with 16 Reviews
SALE PRICE: $314.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
A versatile and flexible tool for precise micrometer measurement of inside dimensions ranging from 1.5" to 12.5" on a variety of parts. Sets include a micrometer head, 2 Interchangeable extension rods and 0.25" spacing collar. With the handle, the tool can be used at depths either beyond reach or oth er wise inaccessible. 0.25" Micrometer measuring capacity.
|
|