Inside Micrometers - Page 35

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-774

The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.005mm. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-023

The Mitutoyo 368 series Holtest vernier inside micrometer has two-point contacts for measurement of the inside dimension (ID) of small bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001”. The measuring faces are made of hardened steel and the micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 468-271

The Mitutoyo Digimatic 468 series Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel and TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, ...

Manufacturer: Starrett Brand: Starrett Model: 128BZ

The set consists of a satin-chrome micrometer head which can be used in combination with any one or more of a series of rigid, tubular steel measuring rods to obtain the required length. The micrometer head is a modification of our No. 63, which has a 2" range. The head has a basic length of 4" which can be lengthened to 6" by means of its measuring range. Interchangeable tubular steel measuring rods and extension rods are lightweight with extreme rigidity, rods screw into each other and seat against hardened ground and lapped surfaces necessary for high accuracy, rod diameter 5/8". Movement of screw: 2", Range with Combination Head: 11-155". Set includes (1) 4-6" Head, (1) each 2", 4", 6", 8", 10", 12" Rods, (1) 12" extension rod, (2) 24" extension rod.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 468-982

The Mitutoyo 468-982 Holtest three-point internal micrometer has a measurement range of 12 to 25 mm, is titanium nitride (TiN)-coated, precise to 0.001 mm, and accurate to + or - 2 micrometers. TiN-coated measuring contact points offer increased durability and impact resistance over uncoated points, and contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. The micrometer has functions for presetting, zero/ABS (Absolute), auto power on/off, data hold, data output, error alarm, and a battery replacement alarm. Estimated battery life is eight months, under normal use. This gage set includes three complete display units, two setting rings, and fitted wooden case. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The co...

Manufacturer: Anytime Tools Brand: Anytime Tools

Professional Quality Precision Measuring Tool Use Depth Micrometers for measuring the depth of small holes, small fabricated articles with grooved or elevated surfaces or different depths or heights. Particular attention has been paid in obtaining the accuracy of the contact surface of the rod and its straightness. Features: Clear microfine graduations .001" on satin chrome finish. Base of tool steel hardened, precision ground and microlapped. All other surfaces satin chrome finished. Base length: 4" Includes 6 Rods for measurment of 0-6". Quick and easy zero adjustment. Rods hardened, ground and lapped on measuring surfaces and adjustable in either direction. Measuring range per rod is 1" and .176" in diameter. Interchange- able rods are fitted to the micrometer spindle against a positive stop and locked. Ratchet thimble for consistent repeated accuracy. Threads hardened, ground and lapped for accuracy. Meets or exceeds Federal accuracy specifications. Includes spanner wrench and fitted case.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG00-3225

Easily adjusted for side movement of jaw

Manufacturer: INSIZE Brand: INSIZE Model: 3229-7

Tubular inside micrometer, 6-7", graduation 001".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-240-30

Digimatic MIC 0-25 mm No-Output.

Manufacturer: INSIZE Brand: INSIZE Model: 3222-24

Tubular inside micrometer, 2-24", graduation 001".