Indicator Stands & Bases - Page 27

Manufacturer: INSIZE Brand: INSIZE Model: 6207-80A

Flex arm magnetic stand.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Used with Rod No. 599-7807, 599-7900 and Upright No. 599-7902.

Manufacturer: TTC Brand: TTC

Manufacturer: Fisso Brand: Flexbar

Base Only. Model No. 14853, Base Only. Model: S2 Dimensions (L x W x H mm): 34 x 30 x 35 Approx. Adhesive power, Lbs.: 67 Connection Thread: M6

Manufacturer: Starrett

Universal Snug, 5/16, 3/8 In ...

Manufacturer: Flexbar Brand: Flexbar

The Original Made in U.S.A. Flexbar. Instant Positioning - instant Locking Universal Holder/Positioners for All AGD indicators and Electronic Sensors (Lug Backs Too!). The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Model No. 18027, Flexbar 15" Height, With Magnet Base With 65 lbs. On/off Magnet Pull. Fine Adjustor Not included.

Manufacturer: Flexbar Brand: Flexbar

Off-the-Post Flexbars. Maximum Rigidity; Excellent Positioning. The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action). Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Precision Engineered. instruments held by Flexbar do not drift. Instant Positioning - instant Locking. Post Clamp (Clevis) Fits 1/2" Dia. Post. Supports up to 4 lb. Load. Accurate tool and instrument Positioner. Use With: AGD and Test indicators, Sensors, Magnifiers, Optic Probes, Wires for Welding, etc. Flexbar Dimensions: Bottom of Base to Top of 1/2" Dia. Post - 9". Length of Flexbar itself - 10". Cable: 19 strand stainless steel Wire has aircraft Grade swaged fittings. Patented Drawbar & Locking Knob design Produces incredibly rigid Arm, once locked. Top Mounting Clamp grips All shapes .125" to .510" Dia. Model No. 18045, Flexbar With Mag. Base (No Fine adjustment). On/off Mag. Base - 2" X 2 1/4" X 2 5/8".

Manufacturer: Flexbar Brand: Flexbar

Flexbar Adds New In-Line Fine Adjustor to its Flexbar Universal Holder/Positioner. Flexbar Machine Corporation, innovators for over 30 years of the Flexbar instant Positioning-instant Locking Flexible Holding Arms, has introduced a new Top-End, in-Line Fine adjustor which holds All AGD Dial indicators as well as Test indicators With dove tail fittings. Flexbar Models are now available With either Single axis or Dual axis Top End Fine adjustors. The Fine adjustment assembly is actuated by a very smooth Micro-Screw thumb adjustor making the Flexbar ideal for High Precision indicating applications. Fine adjustor End holds AGD Dial indicators With 3/8" Stems (8mm bushing Adaptor included) and Test indicators With Dovetail. On/off Mag Base With V on Bottom: 2" x 2-1/4" x 2-5/8", 90lbs. pull. Model No. 18058, Flexbar in-Line Fine Adjustor, V-Mag Base, Single Axis

Manufacturer: Larson Electronics Brand: Larson Electronics Model: 0321OXARRX4

Acro 990 Dual Magnetic Base. Due to its cast aluminum head, the Acro 990 is a top heavy when set upright at the fully articulated angle. Due to the height and the articulation, the torque placed on the magnetic mounting plate with a single magnet can be problematic in high vibration environments or when mounted perpendicular to the ground. The dual magnetic base secures two 5 inch diameter, 200 pound grip magnets to a set of 2 brackets attached to the bottom of the Acro 990 battery base or the Acro 990 Vehicle Adapter. With 400 pounds of magnetic grip distributed over 12 inches of area, this offsets the weight and height and angle of the RL-10. The addition of the second magnet compounds the gripping power by spreading the grip over a larger area while distributing the base support. Designed originally for utility boom trucks and other heavy equipment and vehicle mount operations. Operators can attach the articulating light to the boom in order to take advantage of the articulating light head. The dual magnetic base mount attaches to the base of the battery or vehicle adapter via 4 screws which secure 2 brackets to the base. Caution: Be sure to remove the light by "scooping" the magnetic base bracket from beneath the battery. Do not pull on the light to remove the magnetic bases from the mounting surfaces.

Manufacturer: NEMCO FOOD EQUIPMENT Brand: Nemco Food Equipment Model: 224-1298 Color: Unknown

Portable Base Allows mobility for food cutters instead of mounting