Indicator Stands & Bases - Page 30

Manufacturer: TTC Brand: TTC

Manufacturer: waikei Brand: Magnetic Flexible Base Holder Stand + Dial Test In

Specifications Face: 1-1/4" diameter yellow face Dial type and reading: 0-40-0 balanced inch and 0-.25-0 balanced metric readings Range: 0-0.8mm Graduations: 0.0005"/0.01mm Contact point length: 1/2" Dovetail clamps: 3/8" and 5/32" Mounting type: Dovetail Characteristic & Function A magnetic stand that uses a switchable permanent magnet for convenient mounting onto flat iron or steel surfaces. The arm can be hydraulically locked in any position using the knob on the upright . Useful for holding dial indicators or dial test indicators during alignment operations. Flexible Magnetic Base Holder Stand Features Permanent magnet operation with ON/OFF control. V-grooved base for secure mounting on cylindrical surfaces. Ideal for holding lever indicators at any orientation on a machine tool for alignment operations. Flexible, strong, and precise rotary joints,can adjust any direction and location Powerful magnetic base, with on/off switch for magnet With high stability, it will be your ideal tool in the measurement of precision workpiece field. One magnetic base It can used for dial indicator and lever dial indicator, etc Designed with three joints Easy using for metalwork pieces There is On/Off switch on the base Specifications Base Size (L x W x H): Approximate 40 x 29 x 35mm Total Height: Approx. 19.4cm Clamping Hole Diameter: Approximate 8mm Material: Metal Package Includes 1 x Fowler yellow-face dial test indicator 1 x 3/8" dovetail clamp 1 x 5/32" dovetail clamp 1 x Molded case 1 x Universal Magnetic Base Stand

Manufacturer: Anytime Tools Brand: Anytime Tools

High Quality Professional Grade Tool This is the best companion for your BRIDGEPORT. Mounts with single pressure screw directly on machine quill, bypassing the working tool. Standard 1-7/8" clamping diameter. Features: ALL METAL construction (washers are nylon) Clamping Diameter 1-7/8" Length from clamping bracket to indicator 4-1/2" Reach from 0-12" diameter Suitable for all indicators with 5/32" shank (stud) Adapts immediately for positive and fast indicating Mounts with single pressure screw directly on machine quill, bypassing the working tool Frame is designed with bearing pads properly spaced and an opposite pressure screw securing the rigidity of the mounting The desired stiffness is adjustable and is not altered by the pivoting of the jointsPadded case included!

Manufacturer: Flexbar Brand: Flexbar

Flexiguard: Curved Plastic Shields On Rugged Flexible Goosenecks. Positively Deflects Chips And Coolant. Permits Clear & Closer Visual Inspection Of Work. On C-Clamp Models Permits Clamping Of Safety Shield On Hard-To-Affix Locations Whether Flat, Round, Etc. 1. Made Of Maleable Iron With 120° Vee. Clamp Capacity - 1 3/8". Throat To Center Of Screw - 11/16". Length Of Flex Arm With C-Clamp - 13 1/2". Model No. 13003 Shield Size 12" X 16".

Manufacturer: Noga Brand: Noga

Now you can choose additional arms for your magnetic base to fit your needs.

Manufacturer: Grizzly Brand: Grizzly Model: G9812

These extremely well made precision magnetic bases are an amazing value. Infinitely adjustable and just a turn of the knob securely locks the arm in position. Powerful magnet has On/Off switch.

Manufacturer: Flexbar Brand: Flexbar

The Original Made in U.S.A. Flexbar. Instant Positioning - instant Locking Universal Holder/Positioners for All AGD indicators and Electronic Sensors (Lug Backs Too!) The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Model No. 18033, Flexbar on Disc Mag Base (34800) 3 1/8" Diameter, 100lb. pull. With Fine Adjustor Rod.

Manufacturer: Starrett Brand: Starrett

Universal Indicator Attachment, Steel, Polished Finish, 18 In. (3mm) Range, 2 Interchangable Arms: (1) Straight, (1) Right Angle, For Use With Indicators Having Standard AGD 0.375 In. Stem Dia

Manufacturer: TTC Brand: TTC

Includes: 1" x 2" x 4" micro parallels ground all over and in pairs. Two V's: 1-7/8" x 2-3/8" x 2" Large V: 2" round capacity Small V: 1/2" round capacity

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-585-155-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.