Electronic Indicators - Page 21

Manufacturer: CAS Corporation Brand: CAS Model: CI-2001B

The CI-2001B Indicator with RS-232. Use in a variety of applications - floor scales, livestock scales, platform scales, pallet scales, and much more. With it's bright LCD display, the CI-2001B Indicator is easy to read. Legal for trade.

Manufacturer: Shars Brand: Aventor

SKU 303-3566 DIAL INDICATOR CATEGORY Electronic BRAND Aventor MEASURING RANGE - DIAL INDICATOR 2"/50mm AGD GROUP 2 FACE DIAMETER 2-3/8 STEM DIAMETER 3/8 BACK TYPE Lug RESOLUTION 0.00005"/0.001mm ACCURACY 0.0002"/0.005mm CONTACT POINT THREAD SIZE 4-48

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-396B

Mitutoyo Low Force IDC Digimatic Indicator, Resolution: .00005"/.0001"/.0005"/0.001mm/0.01mm Range: .500", Stem diameter: 3/8", Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction

Manufacturer: INSIZE Brand: INSIZE Model: 2114-51FE

Compact electronic indicator, 2 inch 5mm resolution 00005 inch 0/001mm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-502B

The Mitutoyo 543-502B Absolute Solar Digimatic Indicator is an inch and metric digital indicator with LCD for measuring surface variations that has measurement range of 0.5"/12.7mm and a resolution 0.00005"/0.001mm, a flat back, a 3/8" stem diameter, and a solar-powered battery that provides continuous operation at a lighting level of 40 lux and greater. The battery has a reserve capacity of approximately 3.5 hours when fully charged. The indicator's absolute sensor automatically restores the last origin position when the unit is powered on, aiding multipoint measurement. The flat back design allows stem mounting or plate mounting on the rear of the indicator. The indicator is Ingress Protection certified IP42 against solid objects over 1mm and direct sprays of water up to 15 degrees from the vertical. It meets ANSI (American National Standards Institute) standards and AGD (American Gage Design) standards for stem diameter. It has an SPC (statistical process control) output by which data may be exported. Indicators are used manufacturing and scientific applications to monitor and measure tolerance. SpecificationsUnitsInch and metric, selectableDisplayLCDRange0.5"/12.7mmResolution0.00005"/0.001mmAccuracy0.0001"/0.003mmMeasuring force1.5 N or lessStem diameter3/8"MountingFlat backPower sourceSolar-powered battery (installed)Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indi...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-401B

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-401

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-471B

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Motionics Brand: Motionics Model: W0

WiMER Uno is a data collector and wireless transmitter for Mitutoyo digital instruments that don't usually require continuous data streaming, for example calipers, micrometers and so on. One one side, Uno has a 10-Pin digimatic connector, making it possible to connect to almost all Mitutoyo SPC cables. This will also allow users to reuse data cables if they already have Mitutoyo data communication systems. Please refer to the list below for compatible Mitutoyo instruments. On the other side, Uno has a 2.5mm audio port for a foot switch or a hand trigger switch to trigger data collection. Uno normally stays in Standby mode. Data reading is not triggered until the trigger button is pressed.Once Uno reads a value from the connected gage, it will wirelessly send this reading to iOS/Android/Windows devices via Bluetooth Low Energy. This item is built and shipped from TX, USA

Manufacturer: CAS Corporation Brand: CAS Model: CI-200S

The CI-200 Series, a family of digital indicators providing full featured versatility and dependability at an economical price. A wide array of standard features include either 304 stainless steel IP67 rated or hardened plastic NEMA 12 enclosures, AC or DC operation, choice of dry cell or rechargeable battery, full function numeric keypad, ID capabilities, and much more.