Electronic Indicators - Page 25

Manufacturer: Fowler Brand: Fowler

Fowler s QuadraTest multimode electronic test indicator offers unrivaled measuring versatility in an electronic test indicator! The QuadraTest features four measuring modes (Min, Max, TIR and direct), with an RS-232 interface that is water, oil and coolant resistant to IP65 compliancy WITH or WITHOUT the interface cable installed! The QuadraTest also features true inch/metric conversion, a 1-1/2 diameter dial face that rotates a FULL 360 with both analog bar graph and numeric digital display. It also meets or exceeds DIN/ISO standards (maximum error on .00005 scale at full range: .0004 ). Features 4 measuring modes: Min, Max, TIR and Direct 4 measuring resolutions. True Inch/Metric conversion. Water, oil and coolant resistant to IP65! 1-1/2 diameter dial face rotates a full 360 Bar graph and numeric digital display. Meets or exceeds DIN/ISO Standards. (Maximum error on .00005 scale at full range: .0004 )

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-585

Stem diameter 8mm, M2.5 x 0.45 Thread. Length standard: Absolute electrostatic capacitance type linear encoder. Maximum response speed Unlimited. Battery: SR44 (1 pc.), 938882. Battery life: Approximately 7000 hours under normal use. Dust/Water protection level: IP66. Measuring Force: 2.0N or less.

Manufacturer: Starrett Brand: Starrett Model: P2721-0

Manufacturer: Starrett Brand: Starrett Model: 2900-5-1

The Starrett 2900 Electronic Indicators have Innovative True Absolute Sensor Technology to minimize the chance of data loss for exceptional reliability. Built with IP67 protection and customary The Starrett quality, they maintain their reliability in hostile shop environments.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

IP65 indicators with mechanics and electronics protected against the penetration of liquids. Made to measure in extreme workshop conditions - water and coolant resistant (IP65) - 44mm dial diameter - lets you take advantage of the mechanics combined with digital reading. Choice between absolute (ABS) and relative (REL) measuring modes. Numerical display. Possible setting of PRESET value to +/-130 mm. Inverse measuring direction. Direct conversion of the metric/inch units. Automatic shut down. 5-Digit LC display + sign. 6mm Digit height. Zero-setting of display. Deviation span of indication: 20 µm. Repeatability limit: 5 µm. Measuring force: 0.5 to 0.9 N (+/- 0.15 N). Maximum displacement speed: maximum 2 m/s. Number of measurements per second: 7. Working temperature range: + 5 degree C to + 40 degree C. Power supply: 3V lithium battery, type CR 2032. Autonomy: battery life > 3500 hours. Digital interface: RS232. Mass: 70 g. Electromagnetic compatibility: EN 61326-1. Degree of protection: IP65 (IEC 529). Shipping case including 1 lithium battery, type CR 2032. Identification number. Declaration of conformity. Models 0.01 mm with report.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-341B

.5 In/12.7mm, .00005/.0001/.0005 In/0.001/.01mm, ID-C ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, Calculation Type.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-263

The Mitutoyo 543-263 IDC Digimatic indicator gauge measures to 0.5” (12.77 mm), has an LCD digital readout with resolution to 0.0001” (0.001 mm), and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). The gauge is accurate to + or - 0.00012” (0.003 mm), and supports a measuring force of 1.5 newtons or less. The unit runs on, and includes, one SR44 battery. This indicator gauge has an electronic microprocessor that samples at 50 times per second, and can preset a reference height at any position, set a temporary zero position and return to a true zero reading, switch counting direction, set upper and lower tolerance bounds, and automatically store and hold display of maximum, minimum, and runout (maximum minus minimum) readings. The LCD display also indicates in- or out-of-tolerance (GO/±NG) measurements when bounds are set. The LCD digital readout can display measurements in inches or metric units. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable for SPC (sold separately). An electrostatic capacitance linear encoder helps prevent overspeed errors which help ensure repeatable, precise measurement. A lug on the back of the gauge supports mounting onto a gauge stand. The gauge’s stem diameter is 3/8”, with threads conforming to #4-48 UNF of the Unified Thread Standard (UTS). The gauge conforms to the American National Standards Institute/American Gage Design (ANSI/AGD) standard. Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital display. Dial indicator gauges measure t...

Manufacturer: Fowler Brand: Fowler Model: Indi-Max

Indi-Max 2 /50mm IP54Electronic Indicator with Point Set Features: Direct Inch/Metric Conversion IP54 Coolant dial face 3/8 stem - 4-48 thread Resolution .00005 /.001mm Accuracy: .00016 /.004mm (to 1 ) Tolerance indicators Absolute/incremental reading Floating zero Carbide tipped point

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-530-125-0

The Fowler Sylvac Mark VI electronic indicator has a 2-1/4" diameter high-contrast LCD with a measuring range of .5”, four user-selectable resolutions of 0.0005"/0.01mm, a non-contact indicative measuring system, polyamide housing with a stainless steel shank and spindle, a 3/8" stem diameter, and a carbide contact point. The indicator performs inch/metric conversions, has a measuring speed of 1.5m/60" per second, and a repeatability of 2μm. The non-contact scale inductive measuring system has no moving parts and is insensitive to dust, dirt, oils, and electrical or magnetic interference. The polyamide housing is durable and impact-resistant. The indicator has a stainless steel shank and spindle, a 3/8" mounting stem, 4-48 UNF threading, and a lug back for a range of mounting options. The carbide contact point provides durability for surfaces with a hardness rating below that of carbide. The high-contrast LCD records minimum, maximum, and total indicator reading (TIR), has a hold feature that saves the reading for recording, and can be set to zero at any spindle location. Two measuring references can be individually preset to + or - 99.99999. Statistical Process Control (SPC) data collection and bidirectional RS-232C, USB, Digimatic, and wireless output capability transfers data to a computer (cable not included). When the indicator is used for SPC data collection, the zero button can be configured as a data I/O switch. The indicator requires a lithium wafer battery(included). Specifications Dial face diameter AGD Group 2, 2-1/4" rotates 270 degrees Units Inch/metric conversion Display High-contrast LCD with LED tolerance indicators Resolution 0.0005"/0.01mm Measuring speed 1.5m/60" per second Repeatability 2μm, .0004”/.01mm Contact point material and stem Carbide contact point on 3/8" diameter stem Mounting type Lug back or stem Data features SPC data format, display hold, min, max, delta, TIR, floating zero Output Bidirection...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-492B

Mitutoyo IDC Digimatic Indicator, Resolution: .00005"/.0001"/.0005"/0.001mm/0.01mm Range: 2", Stem diameter: 3/8", Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, P