Dial Indicators - Page 10

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P900-S097

Satin chrome finish

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2781S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Starrett Brand: Starrett Model: 196MA1Z Color: Yellow

While there is a need for indicators with finer graduations. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1929SB-62 Color: White

Unlike many other dial indicators, the one revolution dial indicator literally shows the entire spindle travel or range as one sweep of the hand, eliminating the possibility of reading errors due to miscounting the multiple revolutions. With one-revolution dial indicators, "within tolerance" and "out-of tolerance" can never misinterpreted An unique shock-proof mechanism is incorporated, providing improved immunity to shock due to sudden spindle retraction caused by high impact.

Manufacturer: Starrett Brand: Starrett Model: 25-441J Color: White

Shockless hardened steel gear train and jewel bearings. Furnished with a lug-on-center back. Stainless steel bottom stems. Balanced and tapered hands.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 3571S-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Central Tools Brand: Central Tools

CE4347 Features: -Dial indicator. -Range: 0.2''. -Graduation: 0.001''. -Reading 0-50-0. Product Type: -Testers. Quanitity: -Single. Generic Dimensions: -Back plunger, 0.25'' diameter shank. -Width: 1.5''. Dimensions: Overall Product Weight: -0.26 Pounds.

Manufacturer: Fowler Brand: Fowler Model: UltraTast

UltraTast 0.015 Test Indicator with 0.453 Long Stylus Diameter Great value and German Quality! UltraTast Horizontal Test Indicators (stylus moves at right angle to dial) Includes: 1/4 Dovetail clamp Features: Box-type housing opens on one side only. Bottom and side walls are one piece construction which encloses and protects the movement from shocks and damage. Self-contained movement easily removed and replaced for maintenance and repair. Jewelled movement bearings, precision gears and pinions for maximum sensitivity and accuracy. Satin-chrome finish is corrosion proof Stylus: ball diameter .080 (2mm) Swivel range 220 on all models

Manufacturer: Starrett Brand: Starrett Model: 81-141J Color: White

AGD No. 81 series dial indicator is made for repeat precision measuring.

Manufacturer: Starrett Brand: Starrett Model: 25-441/5J Color: White

The Starrett 25 Series Dial Indicator has a shockless, hardened steel gear train and jewel bearings, except where noted. It is furnished with a lug-on-center back. Anti¬magnetic mechanism is optional for all models.