|
|
-
4.9 of 5.0 with 3 Reviews
SALE PRICE: $138.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2514SB
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2514SB
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.9 of 5.0 with 21 Reviews
SALE PRICE: $140.00 8% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 25-141J
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 25-141J
Color: White
These indicators have a shockless, hardened steel gear train and jewel bearings, except where noted. They are furnished with a lug-on-center back. Antimagnetic mechanism is optional. Special nonshock mechanism is available.
-
4.9 of 5.0 with 8 Reviews
SALE PRICE: $143.05 1% OFF
Manufacturer: Fowler
Brand: Fowler
Model: UltraTast
Manufacturer: Fowler
Brand: Fowler
Model: UltraTast
UltraTast 0.015 Test Indicator with 0.453 Long Stylus Diameter Great value and German Quality! UltraTast Horizontal Test Indicators (stylus moves at right angle to dial) Includes: 1/4 Dovetail clamp Features: Box-type housing opens on one side only. Bottom and side walls are one piece construction which encloses and protects the movement from shocks and damage. Self-contained movement easily removed and replaced for maintenance and repair. Jewelled movement bearings, precision gears and pinions for maximum sensitivity and accuracy. Satin-chrome finish is corrosion proof Stylus: ball diameter .080 (2mm) Swivel range 220
-
4.9 of 5.0 with 45 Reviews
SALE PRICE: $147.89 14% OFF
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: 2014698
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: 2014698
Mahr Federal AGD 2, 2014698 Dial Indicator 1.00" RANGE X .001", 28ISN Lug back, Jeweled is used to measure dimensional deviations. It has a measurement range of 0 to 1.00", graduations of 0.001", an accuracy of ±0.001", and a range per revolution of 0.100". The dial is light green to be easy on the eyes and inch recognition with a contrasting hand for readability. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial is continuous with a reading of 0-100, for direct readings.
-
4.9 of 5.0 with 20 Reviews
SALE PRICE: $160.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2802SB-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2802SB-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.8 of 5.0 with 34 Reviews
SALE PRICE: $9.99
Manufacturer: HFS
Brand: HFS
Manufacturer: HFS
Brand: HFS
Dial Size: 2" Dial Size (Crimped Casing) Accuracy: +/- 3/2/3% Scale: Dual Scale - PSI / Bar Movement: Copper Alloy Bourdon Tube: Copper Alloy Window: Polycarbonate Case: Stainless Steel case for protection in harsh environments Connection: Copper Alloy Lower Mount; 1/4" NPT (for 2" dial) Normal Ambient Temp.: -4F to +140F (-20C to +60C) Liquid Filling: Glycerin oil filled to enhance the reliability and integrity; helps dampen the effect of vibration and pulsation; lubricates the movement and extends the life of gauge.
-
4.8 of 5.0 with 6 Reviews
SALE PRICE: $15.42
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 50102
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 50102
Mitutoyo Edge Finder, Shank Dia: 1/2", Tip Dia: .200".
-
4.8 of 5.0 with 6 Reviews
SALE PRICE: $22.14 7% OFF
Manufacturer: Starrett
Brand: Starrett
Model: PT22428
Manufacturer: Starrett
Brand: Starrett
Model: PT22428
|
The Starrett PT22428 swivel post snug with dovetail clamp Is designed for use with Starrett 708, 709, and 811 series dovetail mount dial test indicators (not included). The snug fits 3/32 to 1/4" diameter spindles and posts. The knurled thumb screw provides a secure grip when making adjustments. The snug is also compatible with Starrett 252 series height transfer gauge, 657 series magnetic base holders, and the 1/4" rod of the PT22430 snug and rod unit (not included). Test indicator gauges, also called gages, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as small variations in flatness or height of an inspected workpiece, and permit measurement in narrow grooves or small bores. A test indicator gauge consists of a ball-tipped contact point on a levered arm, also called a measuring insert, which pivots from a hinge point. The reading indicates the degree of angular displacement of the arm. Test indicator gauges are commonly used in manufacturing, machining, and mechanical engineering. Standard test indicators measure the displacement of the arm perpendicular to the axis of the indicator. Dial and electronic indicators are very similar to test indicators, except that the axis of measurement is parallel to the axis of the indicator. Test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
-
4.8 of 5.0 with 2 Reviews
SALE PRICE: $26.99
Manufacturer: Taylor Toolworks
Brand: Taylor Toolworks
Model: MBDI
Manufacturer: Taylor Toolworks
Brand: Taylor Toolworks
Model: MBDI
|
This is a magnetic base AND dial indicator. Features: TEST INDICATOR 1) Body is made of machined anodized aluminum and NOT plastic 2) Vertical lug back configuration 3) 1 inch of total travel with graduations in 0.0005 (that's half a thousandth) per line 4) Accuracy guaranteed to 0.001 per 1 inch of travel 5) Each indicator comes with inspection certificate 6) Spindle rack pinions and gear trains are made of high quality steel components ensuring long life 7) Does not come with plastic case, MAGNETIC BASE 1) Base weighs 3 pounds has a built-in super strong magnet with 176 pounds (80 Kg) of holding power 2) Magnet has an On/Off switch which easily and quickly engages / releases magnet 3) Base has V-groove on bottom for mounting on cylindrical surfaces 4) Fully adjustable chrome plated two-arm design 5) Precision fine adjustment knob for precise positioning 6) Accepts nearly all AGD dial and test indicator mounts 7) Overall height 9 inches 8) The vertical arm extends 7 inches from the base. The cross arm is 6 inches in length 9) Does not come with plastic case
-
4.8 of 5.0 with 50 Reviews
SALE PRICE: $29.99 1% OFF
Manufacturer: BLAKE
Brand: BLAKE
Manufacturer: BLAKE
Brand: BLAKE
Provides simplified method for centering workpiece or fixture on horizontal or vertical machines, external or internal diameters - also with NC, EDM and other hard to turn spindles. Face indicator remains in fixed position while the machine spindle rotates, allowing operator to accurately position machine table.
|
|