Dial Indicators - Page 18

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1166T Color: White

Mitutoyo's back plunger type dial indicators are built with the measuring spindles on the back of the units, this type of indicator offers the same precision and durability as all other Mitutoyo dial indicators and it is Full stroke.

Manufacturer: Fowler Brand: Fowler

Features Corrosion resistant chrome plated flex arm Holds rigidly in almost any position 40 lb. pull magnet Versatile 70 steel segments work like a contour gage to fit the mag base securely to practically any shape or form Robust, shockproof design Travel: 1 Reading: .001 Continuous reading: 0-100 Tolerance markers AGD Group 2, 2-1/4 dia. Lugback and carbide point Rubber bellows on stem. O-ring seal on safety cap. O-ring protection for bezel and rotating dial Sealed back plate

Manufacturer: Fowler Brand: Fowler Model: X-Test

X-Test 1-1/2 Diameter Indicator to 3/8 Contact point case Contact point wrench Complete in Shop Hardened case Features: Jeweled movement Revolution counter Easy-to-read tilted dial Automatic reversal 210 Swivel arc 5/32 stem Tungsten carbide point: .080 Range: .060 inch model

Manufacturer: Fowler Brand: Fowler

Includes G clamp Tool post base and vertical rod Swinging arm Ball anvil 1 2" anvil Thumb clamp 11 32" standard anvil Universal Test Set is simple, reliable, easy to use and eliminates checking problems Back plunger indicator is fully jeweled.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 3417S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2046SB-80 Color: White

Dial indicators are Mitutoyo’s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.

Manufacturer: L.S. STARRETT Brand: L.S. Starrett

3 different styles of contact points. Accurate and reliable. Few moving parts. Simple operation

Manufacturer: Flexbar Brand: Flexbar

Universal Dovertail indicator Holder. for use With All Test indicators and Probes With Dovetails. Features: 3" Overall Length. 1/4" Shank Diameter. Locks in four 90 Degree Quadrants. Allows infintely variable Angles. Non scarring Brass Gib will not mark indicators. Packed in Hi Impact resuable storage Tubes. Model No. 17490, Universal Dovetail indicator Holder (indicator Not included)

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-526-333-0

The Fowler 52-526-333 Indicator Point Extension Kit includes three indicator points that have 4-48 UNF internal and external threads, are constructed of cold-rolled steel and black oxide plating, and are designed to extend the reach of standard indicator contact points. The kit includes one each of 1", 2", and 3" indicator point extenders that are designed for use with dial, electronic and test indicators and indicator points that have a 4-48 UNF threads. The extenders are made from cold-rolled steel and have a black oxide plating that provides durability and rust-resistance. Test indicator gauges, also called gages, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as small variations in flatness or height of an inspected workpiece, and permit measurement in narrow grooves or small bores. A test indicator gauge consists of a ball-tipped contact point on a levered arm, also called a measuring insert, which pivots from a hinge point. The reading indicates the degree of angular displacement of the arm. Test indicator gauges are commonly used in manufacturing, machining, and mechanical engineering. Standard test indicators measure the displacement of the arm perpendicular to the axis of the indicator. Dial and electronic indicators are very similar to test indicators, except that the axis of measurement is parallel to the axis of the indicator. Test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA. What’s in the Box? 1" indicator point extension 2" indicator point extension 3" indicator point extension

Manufacturer: Dial Brand: Dial Model: 3410

The Dial 3410 Aspen Spin Roll (24') is a highly-reliable, durable product from Dial. This roll of aspen padding measures 28" x 288", and it features a uniformly distributed design for lower cooling temperatures, and extra long virgin aspen fibers reduces fibers in the cooler pan.