|
|
-
3.9 of 5.0 with 4 Reviews
SALE PRICE: $144.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2048S-11
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2048S-11
Color: Yellow
The dial indicators are Mitutoyo’s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
-
3.9 of 5.0 with 13 Reviews
SALE PRICE: $146.00 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 2842-N2
Manufacturer: INSIZE
Brand: INSIZE
Model: 2842-N2
Long probe for 3D tester, 2.441 inch.
-
3.9 of 5.0 with 18 Reviews
SALE PRICE: $150.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 3415S
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 3415S
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
3.9 of 5.0 with 37 Reviews
SALE PRICE: $157.12 1% OFF
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: B8I
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: B8I
Mahr Federal AGD 1, Dial Indicator 0.250" RANGE X .001", B8I, Lug back, Jeweled is used to measure dimensional deviations. It has a measurement range of 0 to .250", graduations of 0.001", an accuracy of ±0.001", and a range per revolution of 0.100". The dial is light green to be easy on the eyes and inch recognition with a contrasting hand for readability. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial is balanced with a reading of 0-50-0, for comparative readings.
-
3.9 of 5.0 with 32 Reviews
SALE PRICE: $188.59 18% OFF
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: B3Q
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: B3Q
Mahr Federal AGD 1, Dial Indicator 0.50" RANGE X .0005", B3Q, Lug back, Jeweled is used to measure dimensional deviations. It has a measurement range of 0 to .05", graduations of 0.0005", an accuracy of ±0.0005", and a range per revolution of 0.02". The dial is light green to be easy on the eyes and inch recognition with a contrasting hand for readability. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial is balanced with a reading of 0-10-0, for comparative readings.
-
3.9 of 5.0 with 20 Reviews
SALE PRICE: $233.07 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Protected against the penetration of liquids. Tesa design swiss made. Factory standard. Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. Mounted insert with a 3 mm dia. steel ball tip. Come in cardboard box. Identification number. Inspection report with a declaration of conformity.
-
3.8 of 5.0 with 31 Reviews
SALE PRICE: $12.99 1% OFF
Manufacturer: Baker'S Pride
Brand: Bakers Pride Oven
Model: 61152
Manufacturer: Baker'S Pride
Brand: Bakers Pride Oven
Model: 61152
Fits: baker's pride blodgett & other manufacturers dial 300-650°f temperature range 300° to 650° f temperature range for pizza ovens fits robertshaw "fdo" thermostats this as well as all items in our store are brand new and factory fresh! (unless listed under used equipment category.)
-
3.8 of 5.0 with 15 Reviews
SALE PRICE: $13.99
Manufacturer: HFS
Brand: HFS
Manufacturer: HFS
Brand: HFS
Inch Dial Indicator 0-0.5X0.001IN
-
3.8 of 5.0 with 13 Reviews
SALE PRICE: $20.34 4% OFF
Manufacturer: Oshlun
Brand: Oshlun
Model: MTM-DI
Manufacturer: Oshlun
Brand: Oshlun
Model: MTM-DI
Our precision 0 to 1-Inch Dial Indicator with SAE high visibility black face has a satin chrome finish and continuous dial with easy to read white numbers. The face is an AGD Size 2 measuring 2-1/4-Inch and has an easy to read revolution counter. The dial face or bezel can be rotated to set zero anywhere on the dial and has a bezel clamp to lock the dial in place. The range per revolution is 0.100-Inch, with an accuracy of +/- 0.001-Inch, graduated in 0.001-Inch increments (0 - 100). Also features a lug back with a 1/4-Inch diameter hole for mounting in indicator holders, stands and magnetic bases, however, it can also be mounted using its standard 3/8-Inch diameter mounting stem.
-
3.8 of 5.0 with 5 Reviews
SALE PRICE: $24.00
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: P900-S099
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: P900-S099
|
|